• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.13 no.2
• /
• pp.1-4
• /
• 1977

The author determined the relationship between the hauling veloicty and the hydrodynamic resistance of the sablefish pot shaped conic frustum like, and induced the formulae to determine the diameter of the main line and the net horse power of the pot hauler. The results are summarized as follows: 1. The maximum hydrodynamic resistance (with its weight in water) of the pot T(kg), when the bottom webbing is covered by a cloth to imitate the catches are scattered on the bottom, is eatimated as $$ T=120v^{1.1} (0.3{\leqq}v{\leqq}0.8) $$ where v denotes the hauling velocity of the pot in m/sec. 2. When P. P. 3 strand rope is used as main line, the diameter d(mm)is recommended to satisfy the formula $$ d=72 \frac{D}{H} V^{1.1} where H denotes the depth of the fishing ground and D the intervals of the pots linked to the main in m respectively. 3. The pot hauler must displace the net horse power p(ps) of $$ P= \frac{75}{120} \frac{D}{H} v^{2.1}$$

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.5
• /
• pp.92-100
• /
• 2001

This study was conducted to evaluate the growth rate of landscape trees produced in containers for three year, and the growth rate of the establishment period during sixth month~twelve months after transplanting. Two types of container such as plastic pot(pot) and fabric growing bag(bag) were adopted to restrict tree roots. Each type of container was divided into seven sub-types. One traditional production method was included as comparison. Two landscape woody plant species (Magnolia denudata, Albizzia julibrissin) were planted in the seven sub-types of container. After one or two growing season in the container, the trees of each container type were transplanted. Half of the trees were transplanted in the mild spring season, and the other half were transplanted in the improper summer season. The data was collected on the diameter of root cellar and the tree height in each year. The research results are as follows; 1. Container production method was lower than the traditional production methods by 1.3 times ~ 2 times in the growth rates. 2. The Geocell bag and Root control bag revealed higher growth rates than pp-woven bag. And pot- in-pot(double pot)system revealed higher growth rates than the ether container pot system in A denudata. There were no differences in the growth rates between container production system in Albizzia julibrissin. 3, The growth rates of improper transplanting trees was high in the \"pot\" type - \"bag\" type - \"control\" in descending order. Especially, the growth rates of \"pot\" type revealed higher than \"control\" by 4 times. 4. From the results of ANOVA and Ad hoc test, the variable of growth factors of each container types in improper transplanting experiment was not significant for a range of 5% or 1% level. And the growth rates of traditional production method was lower than the container production method. 5. There was no differences in growth rate between the containerized and the traditional production system in the case of proper transplanting experiment. The growth rates of diameter of root collar was higher in the \"control\". The growth rates of tree height was higher in the \"bag\" type. Finally, based upon the results of this study, subsequent research on the development of container materials and maintaining methods that focused on the growth rates would be required.aintaining methods that focused on the growth rates would be required.

• Journal of Bio-Environment Control
• /
• v.8 no.4
• /
• pp.232-241
• /
• 1999

The automatic irrigation system using the stem diameter monitoring and the transpiration model for the determination, respectively, of irrigation timing and amount was designed and evaluated for its applicability in pot and field culture of greenhouse tomato. In the pot culture condition, the yield and quality of greenhouse tomato were improved when irrigation was practiced based on the stem diameter monitoring and the transpiration model as compared to the irrigation practice based on soil moisture monitoring. However, the effects were not significant in the field culture condition.

• Journal of Korean Society of Forest Science
• /
• v.72 no.1
• /
• pp.32-36
• /
• 1986

The effect of different inoculation amounts of Pisolithus tinctorius (Pt) spores and fertilizers on the growth of Pinus densiflora seedlings grown in fumigated or nonfumigated soils were tested in the: polyethylene pots. To infest the pot soil with Pt spores, the mixture of the spores with sterilized nursery soil was used after seeding. Eighteen months after inoculation, mycorrhizal formation was 42-70% in fumigated plus Korean-Pt inoculated pots, 60-70% in fumigated plus U.S.-Pt inoculated pots, and less than 1% in non-fumigated, Korean-Pt inoculated pots. Growth enhancement effect of Pt spore inoculation was shown on only fumigated soil and the inoculation increased the seedlings height (8-38%), stem diameter (9-40%) and dry weight (6-73%). Especially 0.4g per pot application rate increased the height (30-31%), stem diameter (23-28%) and dry weight (56-69%), while the 0.2g U.S. Pt spore per pot rate increased 26-38, 17-20 and 58-60%, for height, stem diameter, and dry weight respectively. At 1X fertilizer application rate (urea 2g, fused superphoshate 4g, and potassium chloride 1g per pot), the 0.4g per pot rate resulted in more dry weight by 18% than that at 1/2X rate. The result indicated that there is a need for further research on inoculating nonfumigated soil with Pt and that appropriate application rates of fertilizers and Pt spores are 1X and 0.2-0.4g per pot on fumigated soil, respectively.

• Horticultural Science & Technology
• /
• v.18 no.1
• /
• pp.28-32
• /
• 2000

This study was carried out to investigate the effects of uniconazole treatment on the growth and flowering of potted Chrysanthemum indicum L. for high quality pot plant production. Uniconazole was drenched at 0.05, 0.01, or 0.15 mg a.i./pot at 14 days after planting (DAP) of rooted cuttings. Simultaneously the short-day treatment (SDT) and pinching were adapted. The same amount of uniconazole (0.05 mg a.i./pot) was spilt drenched at once, twice, and three times, respectively, at 1 week interval. Uniconazole markedly reduced plant height, branch length, and stem diameter. Plant height was reduced linearly with increasing uniconazole concentration at 0.05, 0.01, or 0.15 mg a.i./pot up-to 41.6%, 52.5%, and 58.5%, respectively. In 0.05 mg a.i./pot, the number of branches greatly increased and plant height of 22.6 cm was adequate for pot plant. However, higher concentrations (0.10, 0.15 mg a.i.) were not suitable for production of high quality pot plant (17.0, 14.8 cm, respectively). Pinching and SDT decreased the number of days to visible bud, while uniconazole treatments delayed days to visible bud by 5-9 days compared with pinching and SDT. Number of visible buds was highest at 0.05 mg a.i./pot uniconazole treatment. However, flower diameter was decreased by uniconazole treatment, resulting in compact form. Number of stomata was increased by uniconazole treatment. The length of vascular tissues of uniconazole-treated plants ($11.2{\mu}m$) was smaller than that of non-treated plants ($15.0{\mu}m$, and the size of xylem vessel was also decreased. Uniconazole treatment at 0.05 mg a.i./pot at 14 DAP with pinching and SDT were recommended for pot plant production of C. indicum L.

• Journal of Bio-Environment Control
• /
• v.12 no.2
• /
• pp.101-105
• /
• 2003

This experiment was conducted to find out the effect of day length on the production of high quality plug seedlings in onion (Allium cepa L.). Two cultivars, ‘Changnyongdaego’ and‘Wolryun’, were grown to seedlings in 200-cell plug trays under 11.5, 12.5, 13.5 hours and natural day length. These seedlings were transplanted to the pot (16 cm In diameter) and grown under 16 hours day length. Number of leaves and neck diameter showed better growth in the longer than shorter day length treatments, but plant height old sheath length were retarded in the longer day length treatments. Growth such as no. of leaves, neck diameter, plant height and sheath length increased with the passage of day, but plant height and neck diameter decreased by treatment over 20 days with 13.5 hours day length. Bulbing and bulb size of onion after transplanting were enhanced in the seedlings cultured under longer day lengths. From the above results, treatment of long day length during seedling culture in plug tray can control the overgrowth and produce high quality plug seedlings.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.3
• /
• pp.257-265
• /
• 2015

This experiment was carried out to determine the optimum planting density for rice pot seedling cultivation in wheat-rice double cropping system in Honam plain area. A mid-late maturing rice variety 'Chinnong' was raised in pot seedling tray and conventional tray for 30 days, and then transplanted on June 25 in 2012 and 2013. Four different planting densities (15.2, 18.9, 21.6, and 25.3 hills per $m^2$) in pot seedlings were applied as treatment. Conventional tray seedling was implicated as control at a single planting density of 27.8 hills per $m^2$. In this experiment, the number of effective tillers was increased as planting density increasing, but stem diameter was decreased. Pot seedling showed higher stem diameter and effective tillers than the control. Heading dates of pot seedling plots were not significantly different between the planting densities but 2 days faster than the control. Culm length, number of panicles, panicle length, and ripening grain ratio were higher in pot seedling compared to the control, but 1000-grain weight showed no significant difference. Milled rice yields in pot seedlings ranged from 5.19 to $5.43\;t\;ha^{-1}$, and the highest yield was observed in 21.6 hills per $m^2$. Head rice ratios in pot seedlings and the controls were not significantly different. Above results on planting density of rice pot seedling cultivation would be applicable to wheat-rice double cropping and also to late transplanting cultivation of rice single cropping.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.4
• /
• pp.304-308
• /
• 2008

Lilium longiflorum 'Charm' as a $F_1$ hybrid cultivar was released by crossing inbred line '$L_2$-14' and '$L_2$-21' which were obtained from 5 self crosses originated from 'Nellie White', 'Ace' and 'Hinomoto'. The growth and flowering characteristics were evaluated in a greenhouse maintained at a minimum of $13^{\circ}C$ at night during winter in 2006 and 2007. The flower of 'Charm' is white color and horizontal-facing. The flower number of a plant and its diameter is 7.4 and 16.5 cm with 24.5 ornamental(flowering) days. The plant height is 60.3 cm with 70.3 number of leaves. The stem diameter and internode length is 1.2 cm and 1.1 cm, respectively, meaning the plant is compact and sturdy. And the number of seed per a capsule is 251.1. The results of these evaluation, therefore, suggest that seedling Lilium longiflorum 'Charm' can be used as a pot plant due to its short stems, many number of flowers per plant, long ornamental period, strong growth habit with many leaves and thick stem diameter.

• Asian Journal of Turfgrass Science
• /
• v.3 no.1
• /
• pp.24-33
• /
• 1989

This study was conducted to investigate the effect of paclobutrazol [(2 RS , 3 RS )1-(4- chlor-ophenyl )-4, 4- dimethyl -2- (1, 2, 4- triazol -1- yl )- pentan -3-01] on the tolerance of hi-gh temperature and drought stress as related to growth retardation , iranspiration rate , soil water content , nitrogen level and photosynthetic rate in perennial ryegrass ( Loliurn perenne L . ' Omega H , ). Plants were given a 30 ml soil drench of paclohutrazol at the concentrations of 0, 0.01, 0.1, 1.0, 10.. 0, mg / 6 .5cm- diameter pot . The rcsults were as follows : 1. Increasing concentrations of paclohutrazul reduced plant height , leaf area , fresh weight and dry weight , hut increased chlorophyll content per unit area . The number of tillers and leaf width were not affected hy the paclobutrazol concentrations . 2. The proper concentration of paclohatrazol on growth retardation in perennial ryegrass was about I mq /pot , hut leaf deformity and severe growth retardation were shown at high concentration of 10 mq / pot . 3. Perennial ryegrasses grown at 30˚C were shown significantly short plant height and low leaf nitrogen level compared with those grown at 20˚C. Increasing concentrations of paclohutrazol at 20˚C increased nitrogen level hut it could not increase nitrogen level at 30˚C . 4. During the drought stress , increasing temperatures significantly promoted transpiration rate and wilting time . It took about 5 days at 20˚C and 3 days at 30˚C to reach wilting time of leaves from water stress treatment . Soil water contents at wilting time of non-treated controls were averaged 6. 871% at 20˚C and 6. 17% at 30˚C 5. Paclohutrazol reduced transpiration rate at high temperature and drought stress . Wilting appeared at the lower water content of soil according to increasing concentrations of paclobutrazol at 30˚C hut there were no differences among concentrations of at 20˚C. 6.Paclohutrazol treatment at 1 rag /pot reduced injury rate of leaves from 67.1 % and 100 % in control plants to 15.7% and 80% at 20˚C and 3010, respectively. 7. Photosynthetic rate per unit area was significantly reduced at high temperature . Paclohutrazol stimulated photosynthetic rate with increase of concentrations at 20˚C but there was no increasing effect at 30˚C.

• 한국연소학회:학술대회논문집
• /
• 2004.11a
• /
• pp.33-40
• /
• 2004

Combustion of coke/anthracite in an iron ore sintering bed is characterized quantitatively by introducing newly defined parameters related to propagation and thickness of combustion zone and maximum temperature. The parameters are obtained by sintering pot experiment and I-D, unsteady numerical model which treats solid material as multiple solid phases. Experiments and calculations are performed for various major operating parameters: air inlet velocity, different type of fuels which have different reactivity and diameter of the solid fuel. Effects of the operating parameters on the productivity and quality of the sintering process are investigated and evaluated quantitatively and the results show that optimized air supply rate and diameter of anthracite for replacement of coke can be obtained. This approach can be applied to other kinds of combustors for characterization of the combustion in the solid fuel beds.