• Korean Parent-Child Health Journal
• /
• v.6 no.1
• /
• pp.70-81
• /
• 2003

The otitis media has the highest rate of occurrence in 6-36 month after birth, and relatively high rate of occurrence to six years old. It is one of major cause for hearing loss problem because of its high rate of recurrence. The researcher observed at bed that feeding posture and feeding habit at night have some relationship with occurrence of otitis media. I found that medical research in this area was very weak, and it caused her to concentrate her research on the topic. This paper was undertook a retrospective case-control study to find out the relationship between the mode of feeding and the occurrence of otitis media among the otitis media patients and the healthy persons. As the controling groups, the researcher chose fifty eight mothers whose children received the treatment of otitis media(6-36 months after birth) from the pediatrics clinic of two general hospitals in Seoul, as the patient group, and forty five mothers who consulted with their child to well baby clinic at the general hospital and kindergarten in Seoul as the control group. The results of the survey can be summarized as followed : 1. "Otitis media patient group may have more lying posture mothers while feeding than the healthy control group". The first hypothesis is supported by the fact that the children who have lying posture feeding habit mothers are more easily exposed to otitis media than those who have sitting posture feeding habit mothers as the analysis show : $X^2=8.142$, p = .017 2. "Otitis media patient group may have higher rate of sleeping habit with milk bottle on the month at night than the healthy control group does". The second hypothesis was supported by the fact that the patients group has higher rate of expected sleeping habit than the healthy group dose as the analysis show : $X^2=4.35$, p = .037 3. "Otitis media can be found more in the artificial feeding group than in the healthy children group". The hypothesis is rejected by the analysis, $X^2=1.550$, p = .416. Though the hypothesis is not supported by this research, we need to encourage mothers to feed mother's breast milk on the ground that healthy group has mother's milk feeding tendency, and the best food for infants is their mother's milk, and psychological-sociological effects of breast feeding os quite good for children. It will improve the health of infants. It can be summarized as follows : Otitis media is more concerned with posture of feeding and night feeding habits than feeding modes. On the basis of this survey, feeding education problem for mothers of infants need to be developed. In the education, sitting-embracing posture of feeding, mother's breast feeding, and prohibition of children's lying posture feeding at night need to be emphasized.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.5
• /
• pp.637-644
• /
• 2011

Objective & Background: When applying various evaluation tools that analyze work posture risk through observation, accurate measurement of body flexion angle is very important. Method: This study investigated differences and appropriateness of 5 different existing reference points commonly used in the analysis of the work posture. Twenty five ergonomist and trained professionals were participated in this study. A Same flexion angle was utilized for the evaluation of risk assessment of musculoskeletal disorders using five different reference points to investigate the degree of difference between them. To investigate how different the observers' preferred flexion angle measuring methods were compared to the ISO 11226 Reference Posture, a virtual body model was constructed using the Poser 6.0 program. Six types of body flexion postures were constructed, and since neck flexion differs according to body angle, five types of neck flexion postures were constructed with the trunk bending $20^{\circ}$ forward, making up a total of 30 virtual flexion postures. Results: Results showed that the observers used personally preferred reference points instead of reference points recommend in the evaluation tools. Also the results revealed the their seems to be 6 types of flexion angle for the trunk and 11 types of measurement methods for the neck flexion angle in the form of personally preferred reference points. The results showed that a mean difference of $14^{\circ}$($4{\sim}23^{\circ}$) occurred in the trunk, and a mean difference of $20^{\circ}$($-8{\sim}51^{\circ}$) occurred in the neck. To increase accuracy when using the 5 evaluation tools in combination, the ISO 11226 standards, observers' preferred flexion posture standards, and common flexion posture standards of the evaluation tools were compared with the reference points of the 5 evaluation tools. Results showed considerable variance in angle difference for each evaluation tool. Conclusion: According to the results of this study, considering the angle difference between the flexion angle reference points of the evaluation tool and the reference points selected by the observers, it is concluded that instead of personally preferred reference points, the standardized reference points to enhance the accuracy and the objectivity. Application: The result of this study can be used as reference guide to develop the standardized reference point in the future.

• Journal of the Korean Society of Safety
• /
• v.26 no.5
• /
• pp.81-88
• /
• 2011

The goal of this study was to determine whether food industry workers are exposed to musculoskeletal loads due to the work time, frequency, awkward postures and inappropriate workspace design. Three catering workers were evaluated based on job analysis and posture analysis. The results showed that the four most time-consuming tasks were arranging(17%), cooking(16%), handling before cooking(15%) and cutting(15%), and the four most frequent tasks were arranging(21%), cooking(18%), handling after cooking(16%) and handling before cooking(13%). The most common posture was a standing posture(73%) with neutral back(73%), and bent head(50%), left lower arm(71%), right lower arm(78%) and right hand(60%). The comparative analysis of subtasks for the risk levels of musculoskeletal disorders was conducted using the work time, frequency and cumulative time of the postures. The 'displaying' and 'handling after cooking' showed higher risk levels than other subtasks. In addition, the height and length of the tables were evaluated to be inadequate for the workers. It can be concluded that the working environments for catering workers of restaurants should be improved due to the high cumulative time of awkward postures of upper extremities.

• Journal of Korean Physical Therapy Science
• /
• v.31 no.1
• /
• pp.88-97
• /
• 2024

Background: This study was to investigate effects of Correlation Analysis between Cervical-Vertebra Angle and Neck Range of Motion, Muscle Strength, Sternocleidomastoid Thickness of Patients with Forward Head Posture Design: Correlation Analysis. Methods: The subjects of this study were a total of 54 people in the forward head position and their ages were between 30 and 50 years old. The subjects cranio-vertebral angles, neck extension, neck flexion, neck rotation angles, neck flexor strength, neck extensor strength, sternocleidomastoid thickness were evaluated through measuring instruments. The thickness of the sternocleidomastoid muscle was measured using an imaging ultrasound diagnostic device (ultra sound, Versana Premier, GE Medical systems, China). CVA was measured by measuring the side photo of the subject was taken with a camera and evaluated.. neck joint range of motion was measured through digital inclinometer for extension, flexion, and neck rotation. neck muscle strength was measured by measuring the using a digital sthenometer. Data analysis in this study was statistically processed using SPSS version 26.0 (IBM SPSS Inc., USA). Correlation analysis was used and the statistical significance level was set at 0.05. Results: The results neck extension(r= 0.70^**), neck flexion(r= 0.67^**), neck rotation(r= 0.56^**), neck extensor muscle strengt(r= 0.85^**), neck flexor muscle strength(r= 0.66^**), sternocleidomastoid thicknes(r= -0.81^**) It indicates that there is a correlation. Conclusion:These results improve the Cervical-vertebra angle of patients with forward head posture should include a program to improve the thickness of the SCM. In the future, study can be used as an evidentiary material for treatment interventions to improve the Cervical-vertebra angle of patients with forward head posture.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.235-257
• /
• 2004

The purpose of this study was to analyze the kinematical traits variables when performing Uchimata(inner thigh reaping throw) by Voluntary Resistance Levels(VRL) and two postures of Uke in Judo. The subjects, who were one male judoka(YH) for 1992 Barcelona Olympic Games, and one male trainee Y. I. University representative member(SDK) and were filmed on two S-VHS 16 mm video cameras(60fields/sec.), that posture of Uke were Shizenhontai(straight defensive posture) and Jigohontai(straight natural posture), VRL of Uke were 0% and 100%. The kinematical variables were temporal(total time-required: TR), potures and COG variables etc., The data of this study collection were digitized by SIMI Motion Program computed the mean values and the standard deviation calculated for each variables. When performing according to each posture and VRL, from the data analysis and discussion, the conclusions were as follows : 1. Temporal variables total time-required(TR) when performing Uchimata was shown the shortest time YH than SDK by each posture and VRL. TR of each posture were shown the shorten trends or equal in DP by lower than NP, In existence and / or nonexistence of VRL was shown the shorten trends in VRL 0% than 100% of Uke. 2. Posture variables : In attacking right knee angle, YH was performing flexion($147{\rightarrow}103degree$) from Tsukuri(set-up) to Kake(execution) in regardless of postures and VRLs, SDK was performing not exchange extension and flexion in VRL 100%, and extension($120{\rightarrow}142degree$) in VRL 0%, respectively. In supporting left hee angle, YH was performing extension($119{\rightarrow}163degree$) from Tsukuri(set-up) to Kake(at(execution) in regardless of postures and VRLs, SDK extension($93{\rightarrow}139degree$), respectively. In attacking right hip angle, from Tsukuri to Kake, YH was performing extension($133{\rightarrow}169degree$), except in VRL 0%($156{\rightarrow}137degree$) NP, SDK was performing flexion($159{\rightarrow}126degree$) accept in VRL 100%($149{\rightarrow}152degree$) NP, In left hip angle, from Tsukuri to Kake, YH was performing flexion NP(70, 50degree) more than DP(27, 57degree), SDK was performing flexion DP(73, 52degree) more than NP(34, 20degree). 3. COG variables : When performing Uchimata, vertical COG variables was shown YH(:$2{\sim}8cm$), SDK(:$15{\sim}24cm$) lower than Uke's COG level position, in existence and / or nonexistence of postures and VRL, during Kake as maximum force point of throwing techniques in Judo.

• Journal of The Korean Society of Integrative Medicine
• /
• v.5 no.2
• /
• pp.11-17
• /
• 2017

Purpose : The aim of this study was to verify differences in cervicocephalic joint position sense error after different sustained sitting postures in healthy young adults. Methods : Twenty-five healthy adults(12 men, 13 women) participated in this study. Repositioning errors of neck movement were observed in participants during joint repositioning tasks. During 2 test days with a 1-week interval, the participants performed forward head posture and upright sitting posture in random order. Both head-to-neutral(HTN) and head-to-target(HTT) tasks were performed on each day. On the first day, the participants sat slouched or upright for 10 minutes. Then, they sat upright and moved their heads at a self-selected speed with their eyes-closed to pre-determined neutral and target positions as accurately as possible. The participants noticed that when they reached a pre-determined position, the errors between pre-determined neutral and target positions and current position was recorded. The tasks consisted of flexion, extension and lateral bending. On the second day, the same test was performed after another sitting posture for 10 minutes. Repositioning error values were collected by using a smart phone-based inclinometer. The mean value for three trials was used for data analysis. A paired t-test was used for statistical analysis. Results : Significant differences in joint repositioning errors were found between the repositioning error after different sitting postures on the sagittal plane for both the HTN and HTT tasks (P<.05). No significant differences in errors on the coronal plane were found (P>.05). Conclusion : Cervicocephalic joint position sense can be affected by sitting postures, especially on the sagittal plane.

• Physical Therapy Korea
• /
• v.13 no.1
• /
• pp.9-15
• /
• 2006

Work-related musculoskeletal disorder has been associated with long hours of computer work and prolonged periods of static posture. In clinical settings, postural correction is a common treatment approach for individuals with neck, shoulder, and back pain. This study was designed to identify the effect of Forward Head Posture Correctional Device during computer work. Twelve healthy adults (mean age, 27.4 yrs; mean height, 165.0cm mean weight, 65.8 kg) participated in the study. They had no medical history of neurological or surgical problems with their upper extremity. The subjects were asked to perform Head Forward Posture under the guidance of physical therapists and the measured angles were analyzed using a 3-D motion analysis system. Markers were placed on the C7 spinous process, tragus of the ear and forward head angle was between the line from the tragus to the C7 line and the Y-axis at the C7. The statistical significance of difference between, "without" and "with" correctional device was tested by paired t-test. A level of significance was set at ${\alpha}$=.05. In comparison of the computer work between "without" and "with" correctional device, Forward Head Angle was showed significant difference (p<.05). In conclusion, the range of Forward Head Angle was significantly decreased during computer work with the correctional device. Further research is needed to understand the nature of motor control problems in deep muscles in patients with neck, shoulder, and back pain.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.388-397
• /
• 2001

In forestry, where improvement of labor environment is quite impossible, improved posture would result in direct effects by preventing waste of physical strength, prevention of accidental injury caused by fatigue accumulated on certain body parts, and prevention of human error by inattentiveness due to weakened body. Therefore, this research carried on analysis of working posture in manual forest work(thinning using chain-saw, salvage cutting using chain-saw, clearing using hand saw, clearance of twiner using sickle, pruning using saw with a long handle, and tending of young growth using sickle) using OWAS analysis system. According to the OWAS method, percentage of OWAS action categories III and IV in the tasks using chain-saw and sickle was higher than another tasks. For the compared middle skillful worker group and low skillful worker group at felling work using chain-saw, percentage of OWAS action categories IV in middle skillful worker group was 5.1%, and low skillful worker group was 14.1%.

• Journal of Yeungnam Medical Science
• /
• v.6 no.2
• /
• pp.223-239
• /
• 1989

To observe the change in the status of stresses according to three different postural angulation of an intervertebral disc with or without nucleus pulposus, 6 specimens of a 3-dimensional photoelastic model of the s pine were made of epoxy. The nucleus pulposus portion was replaced with silicon in three models, and the three were made without silicon. Through axial application of a vertical compressive load of 8kg, the peculiar patterns of the isochromatic fringes were observed. Stresses on the intervertebral disc were analyzed according to three different postural angulations of the intervertebral disc with the nucleus pulposus and without the nucleus pulposus. The results of these study are as follow : 1. In an erect neutral posture with the nucleus pulposus, the stress concentration was much increased at the posterior portion rather than at the anterior portion. Also, the high stress was concentrated at the medial and central portion. In an erect neutral posture without the nucleus pulposus, the stress concentration was much increased at the anterior portion rather than at the posterior portion and the stress distribution seemed to be locally concentrated. 2. In a maximal flexed posture, the stress concentration was much increased at the posterior portion rather than at the anterior portion. Comparing the presence of the nucleus pulposus with the absence of the nucleus pulposus, the stress concentration was lower at the anterior portion in the presence of the nucleus pulposus than in the absence of the nucleus pulposus. However, the stress distribution at the posterior portion was nearly same in the two groups. According to the analysis of the stress distribution diagram, as a whole, the stress pattern around the disc was evenly distributed. 3. In a maximal extended posture, the higher concentration of the stress distribution at the anterior and medial portion rather than in the posterior and lateral portion was observed. The stress concentration was higher in the presence of the nucleus pulposus than in the absence of the nucleus pulposus. 4. Comparing the maximal flexed posture with the erect neutral posture, the stress concentration in the flexed posture was much decreased in the posterior portion rather than in the erect neutral posture, and an even distribution of the stress pattern in the flexed posture was observed. 5. In the presence of the nucleus pulposus, at the anterior and posterior portion, the stress concentration in the flexed posture was much decreased compared with the extended posture. In the absence of the nucleus pulposus, at the anterior and posterior portion, the stress concentration in the extended posture was much decreased compared with the flexed posture.

• (The)Study of the Eastern Classic
• /
• no.54
• /
• pp.289-318
• /
• 2014

The purpose of this study was to compare Gwonbeop motions among "Gihyosinseo", "Mubiji", "Muyejaebobunyuksokjib" and to analysis catalogue of books on Gwonbeop for comprehensive interpretation in "Muyedobotongji". the conclusion through literature review was as follows. First, There were total 16 references which were composed of 14 references of China and 2 references of Korea. In particular there was no reference of Japan for Gwonbeop. In detail, unrepresentative references of China were "Hanseo", "Gihyosinseo", "Mubiji" and unrepresentative reference of Korea was Muyejaebobunyuksokjib". Second, We compared motions of Gwonbeop between China and Korea. There were located 5 motions such as Gyungakguheese(False Prey Posture), Gigose(Flag Beating Posture), Ahnshichukshinse(Goose Wing Posture), Jumjoose(Picking Elbow Posture), Pogase(Throwing Shelf Postere). In other three references unmentioned "Mubiji" there were located 8 motions such as Jungranse(Spring Railing Posture), Gichukgakse(Ghost Kicking and Leg Striking Postere), Jidangse(Open Finger Attacking Posture), Soodoose(Beast Head Shield Posture) Shingwon(Heavenly Fist Posture), Il-jopyunse(Whipping Lunging Posture), Jakjiryongse(Dragon Prey Snatching Posture), Joyangsoose(Slanting Hero Hand Posture), In two references of Korea there were located 2 unique motions such as Nachaluichoolmun Gakabyunhase(Low Encountering Posture), Gumgyedongnipse(Single Leg Throwing Postere). Third, Most of all we found two kinds of unique motions such as Chukcheonse and Eungswaeik on "Muyejaebobunyuksokjib" and such as Nachaluichoolmun Gakabyunhase(Low Encountering Posture), Gumgyedongnipse (Single Leg Throwing Postere) on "Muyedobotongji". Based on chronological table although "Gihyosinseo" is the longest literature, there was begun changing techniques in details on literatures of Korea. Transformed into techniques of Gwonbeop on Korea could be supposed that those skills were reflected in society and culture of the Joseon Dynasty. To sum it up, Gwonbeop of "Muyedobotongji" was written by "Gihyosinseo", "Mubiji", "Muyejaebobunyuksokjib" but most motions of Gwonbeop were begun to change gradually except 5 motions of "Gihyosinseo". Especially, there were 8 unique motions which could not be found in references of China. Those unique motions of Korea literatures were living proof of attempting transfiguration from motions of China. The significance of this study was to be able to put stepping-stone to interpretate history of Taekwondo which takes center stage on bare hands martial arts and analyzed the meaning of historical martial arts on Gwonbeop in Joseon Dynasty.