• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권5호
• /
• pp.435-439
• /
• 2009

The peripheral ossifying fibroma(POF) is a relatively common, non-neoplastic gingival growth that is classified as a reactive hyperplastic inflammatory lesion. The clinical appearance of POF is generally a small, well-circumscribed, focal mass with a sessile or pedunculated base. The pathogenesis of this lesion is uncertain. POFs are believed to arise from cells of the periodontal ligament as hyperplastic growth of tissue that is unique to the gingival mucosa. Approximately 60% of POFs occur in the maxilla, and 55%-60% of all cases occur in the incisor-canine area. Most lesions are less than 2 cm in size. To our knowledge, huge POF of approximately 8 cm in size in the lower posterior edentulous ridge has not been previously described in the English literature. We report an unusually huge POF overlying the lower posterior edentulous ridge mucosa, along with long-term follow up result.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제36권5호
• /
• pp.224-229
• /
• 2014

The maxillary posterior area is the most challenging site for the dental implant. Although the sinus graft is a predictable and successful technique for rehabilitation of atrophic and pneumatized posterior maxilla, when there is severe destruction of alveolar bone, a very long crown length remains challenging after successful dental implants installation with sinus graft. We performed vertical augmentation of the maxillary posterior alveolar ridge using the allogenic block bone graft with a simultaneous sinus graft using allogenic and heterogenic bone chips. After about six months, we installed the dental implant. After this procedure, we achieved a more favorable crown-implant fixture ratio and better results clinically and biomechanically. This is a preliminary report of vertical augmentation of maxillary posterior alveolar ridge using allogenic block bone graft and simultaneous maxillary sinus graft. Further research requires longer observation and more patients.

• Animal cells and systems
• /
• 제13권1호
• /
• pp.59-69
• /
• 2009

This paper documents the defining morphological characteristics of the larval stages of Chionoecetes tanneri Rathbun, 1893, the grooved Tanner crab, from specimens reared in the laboratory. Chionoecetes tanneri larval stages include two zoeae and one megalopa. The first zoea is characterized by: six setae on the posterior margin of the carapace; postero-lateral spines on abdominal somites 3 and 4, extending beyond the posterior margin of adjacent somites and bearing 9-10 spinnules; 12 plumose setae and one stout distal plumose seta present on the margin of the scaphognathite of the maxilla; and one fused lateral spine and one articulated dorso-medial spine on each fork of the telson. The second zoea is characterized by: 9 setae on the postero-lateral margin of the carapace; a serrated mandible molar; a mandibular palp bud; 25-26 plumose setae on the margin of the scaphognathite of the maxilla; pereiopods with well-developed gills and buds; and four pairs of stout setae on the posterior margin of the telson. For the megalopal stage, the distinguishing characteristics include: a rostral spine equal in length to the supraorbital spine; six setae on the exopod of the uropod; and a single spine on the ischium of the second pereiopod. This study allows C. tanneri larvae to be distinguished from the larvae of known sympatric congeners. This information provides a basic taxonomic tool for researchers in fisheries management and zooplankton ecology who are addressing issues related to trophic interactions, metapopulation dynamics and ecosystem impacts in the evolving marine resource management strategies in the North Pacific, and those related to Chionoecetes species in particular.

• 대한치과교정학회지
• /
• 제22권1호
• /
• pp.229-239
• /
• 1992

This study was performed to define the adaptation patterns of each skeletal components to the flexures of cranial bases, using 91 males from the ages of 17 to 36 and 64 females from the ages of 16 to 34, without orthodontic or prosthetic treatment experiences and with pleasant profiles as subjects. The conclusions are as follow: 1. When considering the changes of flexure of cranial base (Ba-SE-FMN) in both sexes, changes in the anterior cranial base angle to the PM Vertical line (SE-FMN/PMV) were greater than the changes in the posterior cranial base angle to the PM Vertical line (Ba-SE/PMV). Subsequently the nasomaxillary complex showed antero-superior rotating effect as the cranial base angles were increased and postero-inferior rotating effect as they were decreased. 2. Horizontal mandibular angle (Ba-SE-Me) was increased in both sexes as cranial base angle increases (Ba-SE-FMN) and it decreased as the latter was decreases. There by indicating compensatory effects. 3. Maxillary angle (SE-FMN-A) was decreased in both sexes as cranial base angle (Ba-SE-FMN) increases and it increased as the latter was decreased. There by indicating compensatory effects. 4. Mandibular ramus angle to posterior cranial base was decreased in both sexes as cranial base angle increases. There by indicating compensatory effect to anteriorly displaced maxilla and the mandibular ramus angle was increased as the cranial base angle decreases. There by indicating compensatory effect to posteriorly displace maxilla. 5. The length of posterior upper facial height was decreased in both sexes as the cranial base angle increases and it increased as the latter was decreased.

• Imaging Science in Dentistry
• /
• 제40권4호
• /
• pp.179-185
• /
• 2010

Purpose : Cortical bone thickness is one of the important factor in mini-implant stability. This study was performed to investigate the buccal cortical bone thickness at every interdental area as an aid in planning mini-implant placement. Materials and Methods : Two-dimensional slices at every interdental area were selected from the cone-beam computed tomography scans of 20 patients in third decade. Buccal cortical bone thickness was measured at 2, 4, and 6 mm levels from the alveolar crest in the interdental bones of posterior regions of both jaws using the plot profile function of $Ez3D2009^{TM}$ (Vatech, Yongin, Korea). The results were analyzed using by Mann-Whitney test. Results : Buccal cortical bone was thicker in the mandible than in the maxilla. The thickness increased with further distance from the alveolar crest in the maxilla and with coming from the posterior to anterior region in the mandible (p<0.01). The maximum CT value showed an increasing tendency with further distance from the alveolar crest and with coming from posterior to anterior region in both jaws. Conclusion : Interdental buccal cortical bone thickness varied in both jaws, however our study showed a distinct tendency. We expect that these results could be helpful for the selection and preparation of mini-implant sites.

• Journal of Periodontal and Implant Science
• /
• 제40권2호
• /
• pp.76-85
• /
• 2010

Purpose: This study aimed to evaluate the effectiveness of the modified sinus floor elevation technique described hereafter as a "hybrid technique," in 11 patients with severely resorbed posterior maxillae. Methods: Eleven patients who received 22 implants in the maxillary premolar and molar areas by the hybrid technique were enrolled in this study. A slot-shaped osteotomy for access was prepared on the lateral wall along the lower border of the sinus floor. The Schneiderian membrane was fully reflected through the lateral slot. Following drilling with the membrane protected by a periosteal elevator, the bone was grafted. All implants were placed simultaneously with sinus augmentation. The cumulative success rate was calculated and clinical parameters were recorded. Radiographic measurements were performed. Results: All implants were well maintained at last follow up (cumulative success rate=100%). The mean residual bone height, augmented bone height, crown-to-implant ratio, and marginal bone loss were $4.1{\pm}1.64mm$, $8.76{\pm}1.77mm$, $1.21{\pm}0.34mm$, and $0.34{\pm}0.72mm$, respectively. Conclusions: Simultaneous implant placement with sinus augmentation by hybrid technique showed successful clinical results over a 2-year observation period and may be a reliable modality for reconstruction of a severely resorbed posterior maxilla.

• 구강회복응용과학지
• /
• 제24권4호
• /
• pp.381-388
• /
• 2008

상악 구치부 치조골의 해부학적 한계를 극복하기 위한 다양한 방법들이 시도되고 있다. OSFE법은 상악동거상을 위해 사용되어져 오고 있는 방법중 하나이며 본 연구에서는 Endopore 임플란트를 이용하여 상악동내에서 신생골의 형성을 관찰하였다. 66명의 환자에게 115개의 임플란트를 식립하고 평균 26.3개월동안 방사선학적 검사를 시행하였다. 4환자에게서 5개의 임플란트가 보철수복 후 제거되어 추적기간동안 95.6%의 생존율을 보였다. 상악동내에 형성된 신생골의 높이는 $3.26{\pm}1.04mm$이었다.

• 대한치과교정학회지
• /
• 제20권3호
• /
• pp.519-539
• /
• 1990

It is the aim of this study to observe the distribution of various facial types in class III malocclusion and to characterize the craniofacial features of the very facial types. Cephalometric headptates of a hundred and ten persons showing bilateral class III malocclusion whose mean age was 12.51 years and sixty nine persons of normal occlusion whose mean age was 12.23 years were measured and statistically analyzed. The following summary and conclusions were drawn. 1. Affording the bases for SNA and SNB, $35.45\%$ of sample showed normally positioned maxilla and protruded mandible, $30.00\%$ for retruded maxilla and normally positioned mandible, $15.45\%$ for retruded maxilla and protruded mandible, $10.90\%$ for both maxilla and mandible within normal range and $8.20\%$ for miscellaneous types were arranged in class III malocclusion. 2. $52.72\%$ of sample showed neutrodiveigent, $35.45\%$ for hyperdivergent and $11.81\%$ manifested hypodivergent mandible in class III malocclusion. 3. Providing the bases for facial and mandibular planes, $33.63\%$ of sample showed prognathic and neutrodivergent, $20.90\%$ for mesognathic and hyperdivergent, $17.27\%$ for prognathic and hyperdivergent and $15.45\%$ for mesognathic and neutrodivergent were arranged in class III malocclusion. 4. The class III malocclusion brought out shorter cranial base, smaller saddle angle, and larger articular and genial angle. It showed retropositioned maxilla and forward positioned mandible in spite of no significant differences in linear measurements of mandible. Anterior lower facial height was significantly larger in class III malocclusion, while posterior total facial and anterior total facial heights exhibited no significant differences. 5. It is suggested class III malocclusion was attributed to shorter cranial base, smaller saddle angle, maxillary deficiency and/or retrusion, mandibular excess and/or protrusion, excessive vertical growth of the anterior lower face, and their complex as well.

• 대한치과보철학회지
• /
• 제61권4호
• /
• pp.284-292
• /
• 2023

안정적인 구치부 교합지지는 적절한 저작기능과 정상적인 안모의 유지를 위해 매우 중요하다. 특히 65세 이상의 고령환자에서는 저작기능이 충분한 영양섭취와 환자의 전신건강에 직접적인 영향을 미친다. 본 증례에서는 상악 무치악, 하악 양측 구치부 치아 상실을 보이는 고령환자의 구치부 교합지지를 회복해주기 위해 상악 총의치를 제작하여 이상적인 교합평면을 설정하였고, 하악 양측 구치부에 컴퓨터 가이드 임플란트 식립 수술을 진행하였다. 임플란트 지지 임시 수복물을 이용한 임플란트 즉시부하를 통해 환자가 수술 후에도 음식 섭취를 원활하게 할 수 있도록 하였다. 하악 구치부 지르코니아 고정성 보철수복을 완료한 후, 상악 총의치 인공치의 교합면을 Cobalt-Chrome계 금속 합금으로 치환하여 마모 저항성을 향상시켰다. 상악 가철성 총의치, 하악 양측 구치부 고정성 보철 치료를 통해 환자의 교합지지와 저작기능을 빠르게 회복해주고, 최종 치료단계에서는 마모에 대한 장기적 안정성도 얻을 수 있었기에 이를 보고하고자 한다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제17권2호
• /
• pp.180-185
• /
• 1995

TMJ ankylosis is classified with true and false type. A true ankylosis is defined as any condition that produces fibrous or bony adhesions between the articular surfaces of the temporomandibular joint. The main causes of true ankylosis are trauma or infection. A false ankylosis results from pathologic conditions outside the joint that limit mobility of the mandible such as myogenic disorders, coronoid impingement or rare direct bony fusion between maxilla and mandible. The treatment of choice of TMJ ankylosis is surgical intervention. We experienced the male patient with complete mouth opening limitation since 45 years before. This patient has true TMJ ankylosis and rare bony synostosis between maxilla and mandible in the right posterior region. We performed surgical intervention and had a favorable result.