• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.5
• /
• pp.340-345
• /
• 2009

Purpose: The purpose of this study was to evaluate the surgical success of bone reconstruction of the severely atrophic maxilla using autogenous block bone onlay graft from the ramus and ilium prior to dental implantation. And we measured the amount of vertical height change Material and Methods: 26 partially edentulous patients(32 case) who needed block onlay bone graft before implant placement in posterior maxillary area from 2002 to 2009 were selected for this study. Patients consisted of 20 males & 6 females and the average of their age was 54.2. Patients who were treated with ramal bone were 19 case and patients who were treated with iliac bone were 11 case. Digital panoramic X-ray was taken at the day of surgery, 3 months and 6 months later after the surgery. Vertical height change & resorption rate of grafted bone were measured with the same X-rays and compared Results: Two out of 32 bone grafts had to be removed because of inflamation at the grafts area(97.3%). The mean of radiographic vertical height change(change rate) of post-op. 3 month was 0.54mm(8.5%)and 6 month was 0.99mm(15.9%). Compairing to intraoral donor site(ramus), iliac bone had more vertical height change(1.18mm) at 6 month after surgery. Conclusions: Within the limit of this study, autogenous block onlay grafts can be considered a promising treatment for severely atrophic maxilla.

• The korean journal of orthodontics
• /
• v.24 no.3 s.46
• /
• pp.555-567
• /
• 1994

The purpose of this study is to observe the effect of high pull headgear on the craniofacial structures of mixed dentition with Class II malocclusion. The cephalometric headplates of 16 children treated by high pull headgeaar during 6 months and 18 children during 12 months were traced, digitized and statistically analyzed. The results were as follows. 1. Inhibition of foreward growth of maxilla was observed in both group. 2. Clockwise rotation of maxilla was observed in both group. 3. There were distal movement of maxillary 1st molar and inhibition of alveolar bone growth of maxilla. 4. There was compensatory extrusion on mandibular 1st molar. 5. The ratio of anterior facial height to posterior facial height was almostly not changed. In the treatment plan of C II malocclusion by high pull headgear, ire must prevent the mandibulasr 1st molar from extruding and for orthopedic effect, at least 6 months is needed.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.28 no.1
• /
• pp.24-30
• /
• 2002

The facial patterns were expressed by the interrelation of variable factors such as heredity, function and environment. Such variable factors have an effect on the growth and development of maxillofacial bones. The malocclusions with skeletal discrepancies are caused by abnormal forms, sizes and positions of cranial base, maxilla and mandible. For the proper diagnosis and treatment planning, the analysis of such structures is necessary. Lateral cephalograms of 54 adults with class III malocclusion patients (test group) and 61 adults with normal occlusion (control group) were analyzed. Anteroposterior relations and sizes of cranial base, maxilla, mandible were estimated to compare with those of normal ones. In test group, the anterior cranial base length was within normal range, but posterior cranial base, maxilla and mandibular body were longer than those in control group, significantly. Based on the cranial base, the location of maxilla in test group was normal, but the location of mandible was more anterior than that in control. Based on the maxilla, the location of mandible was more anterior in test group than that in control. Both mandibular body and ramus anteroposterior lengths in test group were larger than those in control. Both mandibular plane angle and upper gonial angle were within normal range, but lower gonial angle was significantly high in test group.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.21 no.2
• /
• pp.547-554
• /
• 1994

Posterior crossbites are abnormal buccal, or lingual relationship of a tooth or teeth of the maxilla, the mandible, or both when the teeth of the two arches are in occlusion and involve the molars and premolars. Posterior crossbites are classified as dental, muscular(functional), or skeletal. In an effort to avoid occlusal interferences caused by the inadequate arch width, the patient deviates the mandible laterally upon closure to achieve maximum intercuspation. This is described as functional posterior crossbite. Correction of functional posterior crossbites in the primary & early mixed dentition as early as possible after diagnosis has been recommended, because crossbites do not automatically improve with the eruption of the permanent teeth. Functional posterior crossbites, if left untreated, may have deleterious effects on the development and function of the TMJ. The diagnosis and management of three cases is presented. Each patient with functional posterior crossbites is treated using the bilateral maxillary expansion appliance.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.2
• /
• pp.75-84
• /
• 2001

The purpose of this study is to to analyze the mechanical stress on articular disk of the dentated skull with the condition of unilateral posterior molar missing. For this study, the three dimensional finite element model of human skull scanned by means of computed tomography. (G.E. 8800 Quick, USA) was constructed. The finite element model of jaws is composed of 98,394 elements and 38,321 nodes, and it consists of articular disc, maxilla, mandible, teeth, periodontal ligament and cranium. Boundary condition included rigid restraints at the first molar and endosteal cortical surfaces of the insertion points of temporal bone. The data derived from Nelson's study were used for the loading conditions of mandible during clenchings and for maxilla, new loading and constraint conditions were applied. A clenching task during intercuspal position was modeled to the three dimensional finite element model. The stress level and displacement of articualr disc on the model with unilateral posterior molar missing under bilateral clenching task can be analyzed. During bilateral clenchings, the compressive stress level and diplacement of the articular disk on the side of unilateral posterior molar missing is greater than that on the case with full dentition, whereas a higher stress was found on the disk on the balancing side of the full dentition. Although this kind of study is not enough to explain the role of occlusion as an etiologic factor of TMD, there may be a possibiliy that the condition of posterior molar missings may contribute in part to the TMJ biomechanics.

• Journal of Periodontal and Implant Science
• /
• v.40 no.2
• /
• pp.56-60
• /
• 2010

Purpose: The sinus lift procedure requires detailed knowledge of maxillary sinus anatomy and the possible anatomical variations. This study evaluated the location and prevalence of maxillary sinus septa using computed tomography (CT). Methods: This study was based on the analysis of CT images for posterior maxilla which were obtained from patients who visited Chonbuk National University Dental Hospital during the period of June 2007 to December 2008. With the exclusion of cases presenting any pathological changes, 236 maxillary sinuses in 204 patients were retrospectively analyzed. The average age of the patients was 50.9. The cases were divided into two groups, an atrophy/edentulous segment and a non-atrophy/dentate segment, and maxillary sinus septa of less than 2.5 mm were not taken in-to consideration. The location of septa was also divided for analysis into 3 regions: the anterior (1st and 2nd premolar), middle (1st and 2nd molar) and posterior (behind 2ndmolar) regions. Results: In 54 (20.9%) of the 204 patients there were pathologic findings, and those patients were excluded from the analysis. Sinus septa were present in 58 (24.6%) of the 236 maxillary sinuses and in 55 (27%) of the 204 total patients. In the atrophy/ edentulous ridge group (148 maxillary sinuses), 41 cases (27.7%) were found, and 17 cases (19.3%) were found in the non-atrophy/ dentulous ridge group (88 maxillary sinuses). In terms of location, septa were found in 18 cases (27.3%) in the anterior, in 33 cases (50%) in the middle and in 15 cases (22.7%) in the posterior regions. Conclusions: In the posterior maxilla, regardless of type of ridge (atrophy/edentulous or non-atrophy/dentate), the anatomical variation of sinus septa is diverse in its prevalence and location. Thus, accurate information on the maxillary sinus of thepatient is essential and should be clearly understood by the surgeon to prevent possible complications during sinus lifting.

• Journal of Periodontal and Implant Science
• /
• v.35 no.2
• /
• pp.449-460
• /
• 2005

Objectives Aim of this study was to evaluate the clinical use and the efficacy of Frialit-2 implant system. Experimental Methods Fifty nine patients received placement of Frilalit-2 implants(137 implants) in their maxillary anterior and posterior sites(40 and 97 implants). Intraoral & clinical examination, chart review and radiographs were taken from each patient. Results 1. The total implant survival rate was 92.7% after a mean follow-up period of 19.9 months. 2. The implant survival rate placed in anterior region was 97.5%. 3. The implant survival rate placed in posterior region was 90.7%. 4. The implant survival rate placed in atrophic posterior maxilla with advanced technique (GBR, Sinus elevation) was 87.2%. 5. The implant survival rate placed in type N(D4) bone was 82%, while 95.7% in type III (D3), and 100% in type II(D2) bone. 6. Most of the failed implants(7 of 10) were removed during the maintenance stage after prosthodontic treatment. Conclusion It was concluded that Frialit-2 implant could be used satisfactorily in the esthetic anterior region, but the use in the posterior region, especially with poor bone quality and quantity, further studies are needed.

• The Journal of the Korean dental association
• /
• v.33 no.1 s.308
• /
• pp.59-67
• /
• 1995

• 대한치주과학회:학술대회논문집
• /
• 2006.11a
• /
• pp.153-153
• /
• 2006

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.3
• /
• pp.276-281
• /
• 2010

The maxillary posterior area is the most challenging site for the dental implant. After missing of teeth on maxillary posterior area due to periodontal problems, the remaining alveolar ridge is usually very thin because of not only pneumatization of maxillary sinus but also destruction of alveolar bone. The maxillary sinus bone graft procedure is one of the most predictable and successful treatments for the rehabilitation of atrophic and pneumatized endentulous posterior maxilla. But, in case of severe destruction of alveolar bone due to periodontal problems, very long crown length is still remaining problem after successful sinus graft procedures. We performed vertical augmentation of maxillary posterior alveolar ridge using mandibular ramal block bone graft with simultaneous sinus graft. After this procedures, we could get more favorable crown-implant ratio of final prosthodontic appliance and more satisfactory results on biomechanics. This is a preliminary report of the vertical augmentation of maxillary posterior alveolar ridge using mandibular ramal block bone graft with simultaneous sinus graft, so requires more long-term follow up and further studies.