• Radiation Oncology Journal
• /
• v.6 no.2
• /
• pp.183-194
• /
• 1988

Twenty five patients with histologically proven medulloblastoma received craniospinal radiotherapy (CSRT) at the Seoul National University Hospital from 1979 to 1984. The extent of tumor removal was biopsy only in 2 patients, partial in 18, and near total in 5. With orthogonal technique of CSRT, mainly 55Gy was delivered to the posterior fossa (PF), 40Gy to whole brain (WB), and 30Gy to whole spine (WS). And with AP; PA technique, 50Gy to PF, 45-50Gy to WB, and 36 Gy to WS. Complete remission was obtained in $84\%$ of patients. Among 21 CR's 10 failures were observed, thus total failure rate was $56\%$ (14/25). Of 14 faiure 13 had the primary failure, 11 failed in primary site alone, 1 failure was combined with ventricular seeding, and another 1 was combined with neck node metastasis. There was 1 isolated spinal failure. Actuarial overall survival rates at 3 and 5 years were $75\%$ and $54\%$, and disease-free survival rates were $58\%$ and $36\%$, respectively. Better 5 year disease-free survival was noted in patients with 55 Gy to the posterior fossa than those with 50Gy $(62\%\;vs\;17\%,\;p<0.05)$, in patients treated with orthogonal technique than those treated with AP:PA technique $(87\%\;vs\;12\%,\;p<0.05)$, and in patients with near total removal than those with partial or less removal of tumor $(56\%\;vs\;30\%,\;N.S.)$ Re-irradiation was not satisfactory No severe late sequelae was noted among the survivors. For the higher control of medulloblastoma, dose to posterior fossa should be at least 55Gy with orthogonal CSRT to small tumor burden. And dose reduction in the subarachnoidal spaces might be safe, but optimal dose to the subarchnoidal spaces should be determined by the thorough tumor staging before radiotherapy.

• Investigative Magnetic Resonance Imaging
• /
• v.5 no.2
• /
• pp.149-154
• /
• 2001

Purpose : Our aim was to evaluate the usefulness of fluid-attenuated inversion recovery (FLAIR) MR imaging for detection of acute subarachnoid hemorrhage (SAH) compared with unenhanced CT. Materials and methods ; We compared FLAIR MR images with unenhanced CT scans in 28 patients with acute SAH. Findings of SAH on CT and MR images were graded as 0 (absence), 1 (suspicious), 2 (definite) in the cerebral sulci, sylvian fissure, basal cistern, and cisterns of the posterior fossa. We also compared FLAIR MR images of 28 patients with those of 35 normal subjects, and then the sensitivity, specificity, and diagnostic accuracy of FLAIR MR image for detection of acute SAH were calculated. Results : FLAIR MR image was superior to CT in detecting SAH in the posterior fossa ($1.41{\pm}0.74{\;}vs{\;}0.78{\pm}0.80$; p<0.05) and cortical sulci ($1.11{\pm}0.80{\;}vs{\;}0.70{\pm}0.83$; p<0.05). There was no significant difference between FLAIR MR image and CT in detecting SAH in the basal cistern and sylvian fissure. The sensitivity, specificity, and diagnostic accuracy of FLAIR MR image for detection of SAH were 100% in all. Conclusion : FLAIR MR image is useful in detecting acute SAH, especially in patients with small amount of SAH or SAH in the posterior fossa.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.4
• /
• pp.549-564
• /
• 1993

The purpose of this study was to research the condylar path and the anterior angle of glenoid fossae and classify the patterns of condylar path. Thirty male and female dental students with normal occlesion and masticatory system ranging in age from 21 to 30, without present symptoms and an)r history of TM joint disturbance, were selected for this study. Transcranial radiographs of TM joints under mandibular lateral movement were obtained. By the computer analysis on the radiographs, the angle of posterior slope of articular eminance, the sagittal condylar guidance angie, condylar movement patterns and the height of glenoid fossa was measured respectively, and studied their interrelationship comparatively. The results obtained were as follows : 1. The total distance of condylar movement on balancing side during mandibular lateral movement was 4.55mm for Lt. and 4.78mm for Rt. when mandible moved from C.R. to canine to canine relation and 7.86mm for the Lt. and 8.10mm for the Rt. when mandible moved from C.R. to 7.5mm. 2. The horizontal distance of condylar movement on balancing side during mandibular lateral movements was 3.16mm for the Lt. and 3.52mm for the Rt. when mandible moved from C.R. to canine to canine relation and 6.10mm for the Lt. and 6.30mm for the Rt. when mandible moved from C.R. to 7.5mm. 3. The sagittal condylar guidance angle on balancing side during mandibular lateral movements was $45.96^{\circ}$ for the Lt. and $43.22^{\circ}$ for the Rt. when mandible moved from C.R. from canine to canine relation and $41.14^{\circ}$ for the Lt. and $39.77^{\circ}$ for the Rt. when mandible moved from C.R. to 7.5mm. 4. The height of glenoid fossa was 8.23mm for the Lt. and 7.80mm for the Rt. and the angle of posterior slope of articular eminence was $38.30^{\circ}$ for the Lt. and $38.79^{\circ}$ for the Rt. by method-A and $55.61^{\circ}$ for the Lt. and $55.64^{\circ}$ for the Rt. by method-B. 5. The sequence of the frequency of condylar movement patterns on balancing side during mandibular lateral movement were concave type(30 cases), convex type(16 cases), reverse S shape curve(9 cases) and S shape curve(5 cases) when mandible moved from C.R. to canine to canine relation and concave type(27 cases), 5 shape curve(13 cases), convex type(11 cases) and reverse S shape curve(9 cases) when mandible moved from C.R. to 7.5mm.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.29-39
• /
• 2006

Statements of problem: Zirconia core is used for posterior fixed partial dentures because it's good mechanical properties. Stress is concentrated on connectors in fixed partial dentures, so the proper design of connector areas is needed for adequate mechanical long-term properties of any prosthesis. The area of connector is critical, but tooth size and surrounding soft tissue limit the connector design. Purpose: The purpose of this study is to compare fracture strengths between different connector designs of zirconia core for posterior fixed partial dentures manufactured with CAD/CAM system and determining the optimal connector design satisfying strength and hygiene. Material and method: The following four groups of 40 posterior fixed partial denture specimens(each group 10) were fabricated as followed; group 1 vertical height of connector is 3mm (control group, all groups have the same condition); group 2, lingual vertical 1mm reinforcement on connector; group 3, lingual vertical 2mm reinforcing on connector and group 4, lingual vertical 3mm reinforcing on connector. Specimens were subjected to compressive loading on the central fossa of pontic by instron. SEM was used to identify the initial crack and characterize the fracture mode. Results: The results were as follows: 1. The mean fracture load of the non-lingual reinforcing group was 1212N and the lingual vertical 1mm reinforcing group was 1510N, the lingual vertical 2mm reinforcing group was 1882N, the lingual vertical 3mm reinforcing group was 1980N. 2. The reinforcing groups were statistically significant compared to non-reinforcing groups(P<0.001). 3. There were 2, 3mm reinforcing groups that were statistically significant compared to 1mm reinforcing groups(P<0.001), and the 3mm reinforcing group was not statistically significant compared to 2mm reinforcing groups(P>0.05) 4. Fractures were initiated in gingival embrasures of connectors and processed to the loading site. Conclusion: In this study, lingual reinforcement of connector for improved strength of zirconia based fixed partial denture is nessasary. And long-term study for clinical application is required

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1982.05a
• /
• pp.17.2-19
• /
• 1982

The sinus tympani is subject to great variability in the size, shape and posterior extent. A heavy compact bony zone, especially in the posterior portion and the narrow space between the facial nerve and posterior semicircular canal are the limitation of surgical approach. The facial recess should be opened, creating a wide connection between the mesotympanum and mastoid in the Intact canal wall tympanoplasty with mastoidectomy. The surgically created limits of the facial recess are the facial nerve medially, the chorda tympani laterally and the bone adjacent to the incus superiorly. Using adult Korean's thirty-five temporal bones, the authors measured the osteologic reslationship in the posterior tympanum, especially sinus tympani and facial recess. The result was as followed. 1. The average distance from the anterior end of the pyramidal eminence. 1) to the edge of the sinus tympani directly posterior was 2.54(1.05-5.40)mm. 2) to the maximum posterior extent was 3.22(1.25-7.45)mm. 3) to the maximum cephaled extent was 0.67 (0.40-1.75)mm. 2. The boundary of the sinus tympani was 82.9% from the lower margin oval window to the upper margin round window niche. 3. The deepest part of the sinus tympani was 62.9% in the mid portion, between the ponticulus and subiculum. 4. The oblique dimension from the fossa incudis above to the hypotympanum below was 8.13(7.90-9.55)mm. 5. The transverse dimensions midway between the oval window above and round window below was 3.00(2.85-3.45)mm. 6. The transverse dimension at the level of the fossa incudis was 1.81(1.40-2.15)mm. 7. The facial nerve dehiscence was 14.3%. 8. Anterior-posterior diameter of the footplate was 2.98(2.85-3.05) mm. 9. The average distance from the footplate. 1) to the cochleariform process was 1.42(1.35-1.55) mm. 2) to the round window niche was 1.85(1.45-2.10) mm.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.1
• /
• pp.70-79
• /
• 2016

Patients who lost posterior teeth due to periodontitis or dental caries have collapsed vertical dimension, unstable occlusion and change of the mandibular position. In particular, patients in orthognathic surgery, clinician should re-establish the pre-operative stable position of mandibular condyle in articular fossa and favorable vertical dimension for high post-operative stability of mandible. Therefore, interdisciplinary approach and co-operation, including prosthetics, orthodontics, oral and maxillofacial surgeon, from diagnosis and treatment plan is important to get a good outcome. This case report was patients who had collapsed occlusal plane due to severe dental caries on maxillary molars with skeletal Class III malocclusion. Before orthognathic surgery, resetting of maxillary occlusal plane with temporary removable denture was performed. Then successful multidisciplinary approach was done and lead to acceptable clinical outcome.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.1
• /
• pp.172-184
• /
• 1999

The present study was performed to identify morphologic sub-groupings in Korean children with Class I malocclusions, and to find out anatomic differences between the sub-groups. Standardized lateral cephalometric radiographs of 152 Korean children, aged between 6 and 12 years, with Class I malocclusions were analyzed by the Counterpart Analysis. A statistical method, Ward's Minimum Variance Cluster Analysis, was employed to divide the sample into sub-groups those with similar morphologic characteristics. The results were as follows; 1. There appeared two facial types, Type I and Type II, in Korean children with Class I malocclusions, 48.7% and 51.3%, respectively. 2. In both sub-groups, there existed strong Class III skeletal patterns due to a counterclockwise rotation of the Middle Cranial Fossa alignment, and strong Class II skeletal patterns due to the long Posterior Maxillary vertical dimension and a clockwise rotation of the Ramus alignment. 3. There were no significant differences in Upper Anterior Facial Height between Type I and Type II, $52.6{\pm}2.92mm\;and\;52.8{\pm}3.23mm$, respectively. 4. The Lower Anterior Facial Height in Type II was longer ($66.0{\pm}4.03mm$) due to the long Posterior Maxillary vertical dimension, the clockwise rotation of the Ramus alignment, and a clockwise rotation of the Mandibular plane alignment than that of Type I ($64.2{\pm}4.15mm$).

• The korean journal of orthodontics
• /
• v.22 no.2 s.37
• /
• pp.345-372
• /
• 1992

The purpose of this experiment was to study the effects of changes of mandibular position on temporomandibular joint in internal derangement patients Twenty-four female New Zealand White Rabbits, weighing over 3.5kg, were utilized in this study . Bilateral temporomandibular joint surgery was performed in twenty-one of the rabbits to displace disc anteriorly through incising the retrodiscal tissue 1-2mm posterior to the disc, thus inducing internal derangement. They were divided into three groups nine were left untreated after surgery, six were fitted with functional protrusive appliances 4 weeks after surgery, and six wore collar appliances to apply 4 ounces of mandibular refractive force per side 4 weeks after surgery. The remaining three served as the control group. Histologic examinations were performed after sacrificing them by threes at 4-week intervals. The results were as follows. 1. Histologic findings similar to internal derangement were observed in the rabbits whose retrodiscal tissues had been incised. 2. In the rabbits untreated after surgery, articular surface on condylar process and articular eminence showed severe erosion and deformation, and displaced disc manifested changes in both shape and internal architecture. 3. Functional protrusion after surgery resulted in progressive remodeling on postero-superior portion of condyle and glenoid fossa, while it also brought about erosion on articular eminence and anterior portion of condyle. 4. Mandibular retraction after surgery resulted in compression of retrodiscal tissue and regressive remodeling of posterior portion of condyle.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.17 no.1
• /
• pp.151-162
• /
• 1987

The author obtained the computed tomograms around the condylar head from 10 normal subjects and 5 patients having clicking condylar head from 10 normal subjects and 5 patients having clicking sound or limitation of mouth opening by using a Hitachi-W 500. And then. the author had the axial analysis of condyle position and sagittal analysis of that after sagittal reformation on centric occlusion and 18㎜ interincisal opening. Transcranial view and submentovertex view were taken and compared with computed tomographic view. The obtained results were as follows: 1. Median angle of long axis of condylar head was 17 degrees on centric occlusion and the angles of long axis of both condylar heads were reduced symmetrically on 18㎜ interincisal opening in normal group. however. in the patient group, the affected side of condyle heads showed greater change in the angle on 18㎜ interincisal opening. 2. In the patient group, the condyle head of affected side was located superiorly to that of normal side on centric occlusion and the discrepancy of condular positional height was increased after 18㎜ interincisal opening. 3. The distances from medial pole of condylar head to triangular fossa of temporal bone were same on both right and left side in normal group, however, in the patient group, the distance of affected side was wider than that of opposite side on centric occusion and became narrower than the opposite side on 18㎜ interincisal opening. 4. The distances of posterior joint space were same on both right and left side. The distance t lateral pole 1/3 of condyle head was similar to that on transcranial view on centric occlusion in normal group. 5. The distances of posterior joint space were narrower in patient group than in normal group. 6. Conclusively, the affected condylar head of patient showed postero-latero-superior displacement on centric occlusion and larger range of rotational movement on 18㎜ interincisal opening.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.4
• /
• pp.160-168
• /
• 2014

Objectives: The purpose of this study was to evaluate the condylar position in relation to the glenoid fossa before and after orthodontic-orthognathic surgical treatment and to investigate the relationship with skeletal relapse. Materials and Methods: Lateral cephalograms and temporomandibular joint tomograms from 19 patients with mandibular prognathism who received orthodontic-orthognathic surgery were included in this study. Samples were divided into two groups based on skeletal change during the retention period. The relapse group consisted of 7 patients (3 females and 4 males; mean age, 21.9 years) whose pogonion or menton displaced more than 1 mm during the retention period and the stable group consisted of 12 patients (5 females and 7 males; mean age, 21.7 years). Anterior joint space, posterior joint space, superior joint space, and anteroposterior index were measured on tomograms at pretreatment and posttreatment timepoints. Condyle position and frequency of the positional change were compared between both groups. Results: In the relapse group and stable group, 42.9% and 45.8% of the condyles, respectively, showed forward or backward displacement at posttreatment. However, the changes were small and the mean anterior, posterior, superior joint spaces and frequencies of the positional changes did not differ statistically between both groups. Conclusion: Our results suggest that small positional changes of the condyle, which may occur after orthodontic-orthognathic surgery treatment, may not be related to skeletal relapse after removal of the orthodontic appliances.