• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.288-291
• /
• 2004

The characteristics of the buckling analysis module for stiffened composite structures were studied in this paper. Composite stiffened structures have geometrical asymmetry and material properties asymmetry. Due to these reason, postbuckling analysis was essential and the characteristics of postbuckling analysis modules for ABAQUS were researched. Static analysis module was considered. By considering the material nonlinearity, progressive failure mechanism was applied and buckling strength was estimated

• Structural Engineering and Mechanics
• /
• 제4권5호
• /
• pp.485-496
• /
• 1996

This paper describes a numerical and experimental study on the stability and failure behaviour of rectangular symmetric laminated composite plates. The plates are simply supported along the unloaded edges and clamped along the loaded ends, and they are subjected to uniaxial in-plane compression. The finite element method was employed for the theoretical study. The study examines the effect of the plate's stacking sequence and aspect ratio on the stability and failure response of rectangular symmetric laminated carbon fibre reinforced plastics composite plates. The study also includes the effect of the unloaded edge support conditions on the postbuckling response and failure of the plates. Extensive experimental investigation were also carried out to supplement the finite element study. A comprehensive comparison between theory and experimental data are presented and discussed in this contribution.

• Structural Engineering and Mechanics
• /
• 제35권3호
• /
• pp.335-348
• /
• 2010

Cutouts are often provided in structural and aircraft components for ventilation, for access, inspection, electric lines and fuel lines or sometimes to lighten the structure. This paper addresses the effects of cutout shape (i.e., circular, square, diamond, elliptical-vertical and elliptical-horizontal) and size on buckling and postbuckling response of quasi-isotropic (i.e., $(+45/-45/0/90)_{2s}$) composite laminate under uni-axial compression. The finite element method is used to carry out the investigation. The formulation is based on first order shear deformation theory and von Karman's assumptions are used to incorporate geometric nonlinearity. The 3-D Tsai-Hill criterion is used to predict the failure of a lamina while the onset of delamination is predicted by the interlaminar failure criterion. It is observed that for the smaller size cutout area there is no significant effect of cutout shape on load-deflection response of the laminate. It is also concluded that the cutout size has substantial influence on the buckling and postbuckling response of the laminate with elliptical-horizontal cutout, while this effect is observed to be the least in case of laminate with elliptical-vertical cutout.

• 한국항공우주학회지
• /
• 제35권3호
• /
• pp.196-203
• /
• 2007

외부 수압을 받는 복합재 원통의 좌굴 후 거동과 파손을 유한요소법과 시험으로 연구하였다. 좌굴 후 점진적 파손해석을 위해서는 비선형 유한요소해석 프로그램인 ACOS를 사용하였다. 유한요소해석의 타당성 검증을 위해 5개의 복합재 원통 모델을 제작하여 수압 시험을 수행하였다. 또한 상용 유한요소해석 프로그램인 MSC/NASTRAN과 MSC/MARC를 이용한 해석을 병행하여 ACOS에 의한 결과와 비교하였다. 세 개의 프로그램 중 ACOS가 실험과 가장 가까운 좌굴압력을 예측하였고, 한 경우를 제외하면, 실험값과는 약 12～26% 정도의 차이를 보였다. 해석에서는 원주방향으로 네 개의 웨이브를 가지는 전체 좌굴이 나타나지만, 실제 시험에서는 원통의 기하학적 초기결함으로 인해 국부좌굴이 발생하여 최종파손으로 연결되었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.47-50
• /
• 2004

It is very important that the analysis of postbuckling characteristics for stiffened composite structure. Damage tolerance design concept has been imported in many aerospace structures design to increase the structural efficiency and material failure is an inevitable process in postbuckling behavior. These design concepts are very efficient but consume very much calculation time in analytical process. The proper analysis method for reducing calculation time was researched and the total analysis time was reduced. A selection of proper element, the large load increments in linear response region, and the termination of analysis for unnecessary region were imported in the analysis and about $70\%$ time reduction was achieved with keeping a high accuracy of results.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.272-275
• /
• 2005

The postbuckling analysis of composite curved panels subjected to lateral loading was conducted by a nonlinear finite clement program, ACOS. Two kinds of graphite/epoxy composite materials, URN300 and USN 125 were tested to verify the finite element analysis. High stiffness composite material, URN300 curved panels showed the critical failure prior to initial buckling. On the contrary USN 125 curved panels showd no severe damage after snap-through. In both panels, the finite element and experimental results showed good agreement.

• Structural Engineering and Mechanics
• /
• 제9권2호
• /
• pp.111-126
• /
• 2000

Truss type structures are attractive to a variety of engineering applications on earth as well as in space due to their high stiffness to mass ratios and ease of construction and fabrication. During the service life, an individual member of a truss structure may lose load carrying capacity due to many reasons, which may lead to collapse of the structure. An analytical and computational procedure has been developed to study the response of truss structures subject to member failure under static and dynamic loadings. Emphasis is given to the dynamic effects of member failure and the propagation of local damage to other parts of the structure. The methodology developed is based on nonlinear finite element analysis technique and considers elasto-plastic material nonlinearity, postbuckling of members, and large deformation geometric nonlinearity. The pseudo force approach is used to represent the member failure. Results obtained for a planar nine-bay indeterminate truss undergoing sequential member failure show that failure of one member can initiate failure of several members in the structure.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.92-95
• /
• 2002

A nonlinear finite element method is presented to evaluate the torsional buckling moment and failure of composite laminated cylinders. For the progressive failure analysis, the complete unloading method is used based on the maximum stress failure criteria. An arc-length method is incorporated to trace the postbuckling equilibrium path. Present finite element method is verified by the existing experimental and analytical results. The results of the parametric study show that the torsional buckling moments are sensitive to the geometric change, but are not much affected by the lay-up angle. All cylinders tested numerically show the unstable torsional buckling, and therefore the torsional buckling always leads to the catastrophic failure.

• 한국항공우주학회지
• /
• 제37권2호
• /
• pp.147-155
• /
• 2009

외부 수압을 받는 필라멘트 와인딩 후판 복합재 원통의 좌굴 및 파손을 유한요소법과 시험으로 연구하였다. 자체 개발 프로그램인 ACOS와 상업용 프로그램인 MSC.NASTRAN(선형)과 MSC.MARC(비선형)를 이용한 유한요소해석을 수행하였다. 복합재 원통 시편은 T700 카본-에폭시로 필라멘르 와인딩 기법에 의해 $[\pm30/90]_{FW}$, $[\pm45/90]_{FW}$, $[\pm60]_{FW}$, $[\pm60/90]_{FW}$의 각도로 제작하여 수압시험을 수행하였다. 사용한 세 가지 프로그램 중 ACOS가 시험값과 1.7~14.3%의 차이를 보이며 좌굴 압력을 가장 잘 예측하였다. 모든 경우에 좌굴 후 지지하중이 초기 좌굴하중보다 커지지 못하고 최종파손으로 연결되었다.