• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.2
• /
• pp.61-69
• /
• 2020

As post-harvest processes of onions are carried by a 20 kg-net package which results in high-cost and low-efficiency, especially, the insufficient drying and physical damage of onions after harvesting leads to a huge second loss in storage, we had developed a low-cost, high-efficiency post-harvest bulk handling machinery system by collecting onions on a farm using ton-bags, drying with forced air circulation, and sorting/packaging. The post-harvest bulk handling machinery system consisted of 6 devices, and this study designed an automatic feed hopper with a feeding rate control device, an inclined belt conveyor with a two-step chute, and an automatic pallet unloading device for feeding onions into the sorting/packing line. This study also analyzed the performance and control of the total system. The device had 1-ton handling capacity, but the operational condition was set to increase the capacity. The three-step filling method of pallet by the velocity control of the inclined belt conveyor was applied in the post-harvest bulk handling machinery system for the prevention of physical damage. If one worker was set to operate the total system, the time required to complete one palletized load was approximately 5 minutes and 5 seconds. The calculated daily handling capacity was approximately 94 tons, when the daily actual working time was 8 hours. When the developed system was applied to the managerial size of 2,000 ton, the processing cost per ton of the system was decreased by 19.5%, compared with the existing 20 kg-net package-based handling. The developed post-harvest bulk handling machinery system would be a good substitute for the rapid decline and aging of rural labor.

• Fisheries and Aquatic Sciences
• /
• v.23 no.9
• /
• pp.25.1-25.9
• /
• 2020

Fish is an extremely perishable food product which requires proper handling soon after harvest. The present study was aimed at assessing post-harvest fish losses and preservation practices in Siavonga district, Southern Zambia. Structured and semi-structured questionnaires were used to collect data on post-harvest fish losses and preservation practices from aquaculture producers, artisanal, and commercial fishers. All the fishers who landed on the lakeshore were interviewed, while aquaculture producers were randomly selected based on the information provided by the local department of fisheries. The results of the study revealed that all the fishers experienced post-harvest fish losses at varying degrees with those losing up to 10% of the total catch being in the majority. In contrast, aquaculture producers did not report any post-harvest fish losses. Most aquaculture producers commonly used chilling as preservation practice contrary to artisanal and commercial fishers who commonly used smoking and sun sun-drying respectively. Furthermore, fish product safety and quality control were poorly practiced in the district. Lack of cold storage facilities and fluctuating weather conditions were the major challenges impacting fish post-harvest activities. Therefore, to curb the loss of revenue due to post-harvest fish losses, we propose the introduction of new technology, self-development skills for fishing communities, and enhanced access to refrigeration facilities.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.539-546
• /
• 1996

The physical condition of rapeseed delivered to fat industry plants plays a significant role in the formation of the qualitative features of the raw material for oil production and, consequently , of the oil itself. Rapeseed is stored in silos , frequently for months, before it is subjected to processing. During the long storage, the conditions of the seed cover is very important, as the seed cover provides natural protection of the seed against the effect of the environment. Seeds with damaged seed cover are more easily affected by mildew, and the rate of chemical processes. Deteriorating the quality of oil contained in the cotyledons is faster in such seeds. Cracked seed covers facilitates also the growth and development of microorgaism. So as rapeseed damage occurring inthe course of harvest and the post-harvest processing have a negative effect of the quality and quantity of oil the sees contain. The study presented here was aimed at examining the typical process of purcha ing and handling of rapeseed in fat industry plants, in the aspect of the occurrence of mechanical damage to the seeds. Special attention was paid to the condition of rapeseed immediately after combine harvesting : next , the successive stages of technological handling of the seed were examined. observing the operation parameters of the particular machinery and equipment in order to identify those operations which caused deterioration in the quality of the material (sees). Seed samples were taken successively from the following the hopper, prior to cleaning , after cleaning , prior to drying , after drying, from dry rape silo. The total level of damage increased through the handling. The content of unusable contaminants had the tendency to decrease in the successive operations. though the actual values still exceeded levels permitted by standards. The study allow to indicate the operation fo postharvest technological process, which cause the most seed damage as well as gave quantita ive description of the losses occurred.

• Food Science of Animal Resources
• /
• v.24 no.4
• /
• pp.424-432
• /
• 2004

The handling and transport of broiler birds from farm to the processing factory is known to cause injury and dead. The preslaughter period can be compromised through thermal stress, emotional stress, starvation, dehydration, metabolic exhaustion, trauma to the skin and bone fraction resulting in bruising and dead. This paper focuses on the control points of individual post Harvest stages by reference to recent literature. In catching, the injuries and deads are caused from fracture of bone, skin damage and hipbone dislocation. It can be improved by training the catchers. The primary factor of dead during transportation is from thermal stress. It is related to stocking density, type of crate and vehicle, ventilation and transportation time. Of the factors, the ventilation is very important. The holding place should be built with consideration of protection from the hostile external environment. There were not much progresses in this area, however, many researches are conducting to focus on animal welfare in European Union. Recently, it is rapidly changed in marketing custom from whole carcass to portion cut in Korea. This means the increase of economic loss due to the mishandling at post harvest. The systematic approach is demanded for this area.

• Fisheries and Aquatic Sciences
• /
• v.26 no.10
• /
• pp.593-604
• /
• 2023

Post-harvest handling and hygienic level of aquatic products significantly affect the quality and level of safety. Cold chain control is one of the determining factors for the quality of fish and the bacterial community that grows on the fish. Identification of spoilage bacteria and pathogens in aquatic products must be made because it will determine the physical and chemical quality. A molecular identification method with high sensitivity is the solution. This study aims to identify the quality of fish and bacterial communities that grow. The research procedures included sample collection, pH measurement, drip loss measurement, transportation and cold storage treatment, DNA extraction, DNA sequencing, sequence analysis, and bioinformatics analysis. The conclusion obtained from this study is that the simulation of the cold chain system applied to eastern little tuna does not significantly affect changes in the water activity value, pH, and drip loss. The insignificant change indicates that the eastern little tuna samples are still in good quality. The bioinformatics analysis showed the highest diversity and abundance of the bacterial community came from the Gammaproteobacterial class.

• Korean Journal of Agricultural Science
• /
• v.45 no.3
• /
• pp.325-353
• /
• 2018

Agricultural systems in South Asian countries are dominated by smallholder farmers. Additionally, these farmers have limited access to pre- and post-harvest technologies due to their high initial cost. The lack of these technologies in postharvest handling is responsible for 20% to 44% of fruit and vegetable losses. These high losses are largely the result of a generally weak basic postharvest infrastructure for the preservation of products, which avoids damage from improper handling, transportation, packaging, and storage. High postharvest losses of products negatively affect food availability, food security, and nutrition, as the producer is able to sell less of the farm yield and the net availability of these food commodities for consumption is reduced. An underlying cause of these postharvest losses is the limited awareness and knowledge bases of stakeholders (researchers, farmers, governments, non-governmental organizations, and merchants) in the traditional supply chains in which these losses occur. The analysis presented in this paper explores the state of postharvest practice in South Asian countries and discusses options for low-cost postharvest technologies in the region that can support small-scale farmers and provide a viable pathway for supply to the market, joining with modern value chains and bringing about individual and regional reduction in postharvest losses of fruits and vegetables. The improvement of basic and simple low-cost technologies through precise research efforts has the potential to prevent such huge losses of products, and help meet the ever-increasing demand for food in South Asian countries.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2002.08a
• /
• pp.54-63
• /
• 2002

Post-harvest technology for rice was focused on in-bin drying system, which consists of about 100, 000 facilities in 1980s. The modernized Rice Processing Complex (RPC) and Drying Storage Center (DSC) became popular for rice dry, storage, process and distribution from 1990s. However, the percentage of artificial drying for rice is 48% (2001) and the ability of bulk storage is about 15%. Therefore it is necessary to build enough drying and bulk storage facilities. The definition of high quality rice is to satisfy both good appearance and good taste. The index for good taste in rice is a below 7% of protein, 17-20% of amylose, 15.5-16.5% of moisture contents and high concentration of Mg and K. To obtain a high quality rice, it is absolutely needed to integrate high technologies including breeding program, cropping methods, harvesting time, drying, storing and processing methodologies. Generally, consumers prefer to rice retaining below b value of 5 in colorimetry, and the whiteness, the hardness and the moisture contents of rice are in order of consumer preference in rice quality. By selection of rice cultivars according to acceptable quality, the periods between harvesting time and drying reduced up to about 20 days. Therefore it is necessary to develop a low temperature grain drying system in order to (1) increase the rate of artificial rice drying up to 85%, (2) keep the drying temperature of below 45C, (3) maintain high quality in rice and (4) save energy consumption. Bulk storage facilities with low temperature storage system (7-15C) for rice using grain cooler should be built to reduce labor for handling and transportation and to keep a quality of rice. In the cooled rice, there is no loss of grain quality due to respiration, insect and microorganism, which results in high quality rice containing 16% of moisture contents all year round. In addition, introducing a low temperature milling system reduced the percentage of broken rice to 2% and increased the percentage of head rice to 3% because of proper hardness of grain. It has been noted that the broken rice and cracking reduced significantly by using low pressure milling and wet milling. Our mission for improving rice market competitiveness goes to (1) produce environment friendly, functional rice cultivars, (2) establish a grade standard of rice quality, (3) breed a new cultivar for consumer oriented and (4) extend the period of storage and shelf life of rice during postharvest.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.1
• /
• pp.1-7
• /
• 2023

Chlorine dioxide (ClO₂) is widely used for post-harvest sterilization treatment. However, there are limitations in the retail application of ClO₂ due to difficulties in handling, expensive facilities, and safety concerns. Therefore, it is necessary to develop a ClO₂ technology that can be easily applied and continuously released for a long period. In this study, a series of ClO₂ self-releasing sachets were developed. First, poly(ether-block-amide) (PEBAX) and polyethylene-glycol (PEG) composite films containing different ratios of citric acid (CA) were prepared using the solution casting method. The as-prepared PEBAX/PEG-CA composite films were evaluated using FT-IR, DSC, and TGA to confirm chemical structure and thermal properties. Subsequently, PEBAX/PEG-CA composite films were designed in the form of a sachet and NaClO₂ powder was transferred into the sachet to achieve a ClO₂ self-releasing system. The ClO₂-releasing behavior of the sachet was investigated by measuring the release amount of the gas using UV-vis. The release amount of ClO₂ increased with increasing CA contents owing to the existence of higher protons (trigger) in the polymer matrix. Further, ClO₂ gas was released for a longer time. Therefore, the as-prepared smart sachet can be tuned according to applications and packaging sizes to serve an optimal sterilization effect.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1995.07a
• /
• pp.133-170
• /
• 1995

The major objectives of fruit breeding lie in improvement of cultivar, easy to be cultivated and of high quality, in order to produce unexpensive, delicious fruit both for fresh fruit market and processing. Recently, fruit breeding in Korea has contributed to breeding of several superior cultivars in major fruit crops, resulting in appreciable improvement in qualities such as skin color, taste and fruit-bearing habit concerned with productivity. In spite of accomplishments mentioned above, the need for both highly disease-resistant cultivars and long-keeping, physiological disorder-resistant cultivars to meet long distance transsportation in the temperate fruit crops of apples, oriental pears, stone fruits such as peaches, and grapes grown in Korea is rapidly pressing more than ever, as cultivars of today susceptible to pests and diseases and vulnerable to physiological disorders are very expensive and time-consuming in post-harvest handling and management. Thus, imporvements made in the above problems through breeding level will lead to the really enhanced productivity in fruit industry. The major impediments of tree size, the long length of juvenile period and the highly heterogeneous genetic composition to the improvement of fruit crops are responsible for the lower amount and rate of improvements of fruit crops as compared to annuals. Considering the expected limitations of the above problems to be solved through conventional breeding methods and strategy, a turning point of breeding a near perfect cultivar would be laid down if innovative breakthroughs in biological technology will be realized in applying some of the techniques of genetic manipulation at the molecular level to the cultivar improvement of fruit crops, such as the selective insertion of DNA carrying genes that govern desirable characteristics. More than anything else, those traits such as fruiting habit deciding productivity, elements of fruit qualities conditioned by monogene, and disease-and pest-resistance of vital importance for successful fruit growing are urgently desired to be improved by advancement of biotechnology for they are more than difficult and need long period to be attained through conventional breeding method.

• Journal of Biosystems Engineering
• /
• v.40 no.3
• /
• pp.201-211
• /
• 2015

Purpose: Designing equipment for processing, sorting, and other post-harvest operations of agricultural products requires information about their physical properties. This study was conducted to investigate some of the mechanical and physical properties of Moringa oleifera L. pods and seeds. Methods: Properties such as the length, width, thickness, bulk density, porosity, mass, static coefficient of friction, and angle of repose were determined as a function of moisture content. Statistical data and force-deformation curves obtained at each loading orientation and moisture level were analyzed for bioyield point, bioyield strength, yield force, rupture point, and rupture strength using a testrometric machine. Result: The basic dimensions (length, width, and thickness) of moringa pods and seeds were found to increase linearly from 311.15 to 371.45 mm, 22.79 to 31.22 mm, and 22.24 to 29.88 mm, respectively, in the moisture range of 12 to 49.5% d.b. The coefficient of friction for both pods and seeds increased linearly with an increase in moisture content on all the surfaces used. The highest value was recorded on mild steel, with 0.581 for pods and 0.3533 for seeds, and the lowest on glass for pods, with a value of 0.501, and of 0.2933 for seeds on galvanized steel. The bioyield and rupture forces, bioyield and rupture energies, and deformation of the pods decreased with an increase in moisture content to a minimum value, then increased with further decrease within the moisture content range, while the yield force increased to a maximum value and then decreased as the moisture content increased. Conclusion: These results will help to determine the most suitable conditions for processing, transporting, and storing moringa pods, and to provide relevant data useful in designing handling and processing equipment for the crop.