• Agricultural and Biosystems Engineering
• /
• 제3권1호
• /
• pp.10-17
• /
• 2002

Quality attributes of apple are greatly affected by the cooling rate and environmental conditions during storage. Studies were conducted to evaluate the effect of cooling rate on different quality attributes of apple. The effect of $O_2$ pulldown rate of the CA chamber on the quality of apple was also determined. Two methods were used viz. conventional CA procedure and rapid CA procedure. Apples stored by medium and slow cooling methods lost its flesh firmness significantly from an initial level of 4.55 kg to 2.83 kg and 2.27 kg, respectively on 35 days after storage whereas, in rapid cooling, the firmness level changed from 4.55 kg to 3.20 kg on 35 days after storage. At the end of 35 days of storage, titratable acidity decreased insignificantly from an initial value of 0.24l% to 0.239% in the case of rapid CA whereas in the case of conventional CA it dropped significantly to 0.215% from its initial level. The initial flesh firmness of 4.55 kg also changed significantly to 4.05 kg on 35 days after storage in conventional CA whereas in rapid CA it changed to 4.36 kg, which was found to be non-significant at 5% level of significance. Total soluble solids increased from an initial level of $12.43^{\circ}$Bx to $12.60^{\circ}C.$ Bx on 35 days after storage in rapid CA whereas it increased to $13.07^{\circ}$ Bx in conventional CA. Ascorbic acid content of apple juice decreased insignificantly from 6.67 mg/100 mL to 5.87 mg/100 mL on 35 days after storage in rapid CA whereas in conventional CA, it decreased significantly to 5.27 mg/100 mL from its initial level.

• 한국수정란이식학회지
• /
• 제26권3호
• /
• pp.187-193
• /
• 2011

This study was carried out to establish most suitable freezing condition, to evaluate the different glycerol concentration of freezing and thawing rates on motility, viability, membrane integrity and acrosome intecrity of frozen Korean Jeju Black Bull spermatozoa, Semen was collected from a Korean Jeju Black Bull using an artificial vagina and transported to the laboratory. The semen was extended gradually 1:5 then cooled slowly for 2 hrs to 4$^{\circ}C$. The semen was diluted 1:1 with cryoprotectant extenders (3%, 5% and 7% glycerol) and equilibrated for 2 hrs at cold chamber and packed to 0.5 ml straws. The semen straws were located above 3 cm of liquid nitrogen for 5 minutes, above 5 cm for 10 min and above 8 cm for 10 min. And then the frozen straw was plunged into LN$_2$. The presented straws were examined the viability and motility after thawed at 37$^{\circ}C$ water bath. The viability and membrane integrity immediately post-thawing were significantly higher in samples frozen in 7% glycerol than 3% and 5% glycerol (p<0.05). After CTC staining to assess acrosome integrity, F pattern was significantly increased, but B pattern was significantly decreased in 7% glycerol (p<0.05). Freezing distance of 5 cm from liquid nitrogen and pre-cooling for 10 min yield better survival and membrane integrity, but not significant difference. However, AR pattern according to CTC staining was significantly decreased in 3 cm for 5 min.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.787-790
• /
• 2017

본 연구는 이원추진제 추력기(thruster)에 사용되는 메탄-산소 연소특성규명의 선행연구로서 모델연소실 내 전단동축형인젝터를 통해 분사된 기체메탄-기체산소 비예혼합화염의 연소안정한계 및 화염형상을 도출하기 위한 실험적 연구가 수행되었다. DSLR 카메라를 이용하여 화염 직접이미지(direct image)를 촬영하였고, 이미지 후처리(post-processing)를 통해 연소특성파악 및 화염길이 정량화를 수행하였다. 그 결과, 산화제 레이놀즈 수($Re_o$)가 증가함에 따라 이론반응비(stoichiometric ratio)에서 안정된 화염이 발생하였고, 동일 인젝터직경 조건에서 난류화염의 길이가 늘어남을 확인하였다.

• 한국추진공학회지
• /
• 제24권1호
• /
• pp.1-8
• /
• 2020

메탄/산소 이원추진제 소형로켓엔진의 성능평가를 위한 형상설계 및 시험평가시스템을 구축하였다. 인젝터는 추진제 미립화 성능이 우수하고, 연소불안정성이 적은 스월 동축형(swirl-coaxial) 방식을 채택하였다. 연소효율 비교를 위해 연소실의 종횡비는 1.5, 1.8, 2.1로 각각 설정하였다. 그리고 정밀추력측정장치의 측정 신뢰성을 높이기 위해 pre/post calibration을 실시하였다. 그 결과, 예비 지상연소시험에서 추력과 비추력은 89.2 N, 181.8 s로 78.4%의 효율을 가지고, 특성속도는 84.2%의 효율을 갖는 것이 확인되었다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권4호
• /
• pp.137-141
• /
• 2004

In this paper, a thermopneumatic PMDS (polydimethlysiloxane) micropump with nozzle/diffuser elements is presented. The micropump is composed of nozzle/diffuser elements as dynamic valves, an actuator consisting of a circular PDMS diaphragm and a Cr/Au heater on a glass substrate. Four PDMS layers are used for fabrication of an actuator chamber, actuator diaphragm by a spin coating process, spacer layer, and nozzle/diffuser by the SU-8 molding process. The radius and thickness of the actuator diaphragm is 2 mm and 30 ${\mu}{\textrm}{m}$, respectively. The length and the conical angle of the nozzle/diffuser elements are 3.5 mm and 20$^{\circ}$, respectively. The actuator diaphragm is driven by the air cavity pressure variation caused by ohmic heating and natural cooling. The flow rate of the micropump in the frequency domain is measured for various duty cycles of the square wave input voltage. When the square wave input voltage of 5 V DC is applied to the heater, the maximum flow rate of the micropump is 44.6 ${mu}ell$/min at 100 Hz with a duty ratio of 80% under the zero pressure difference.

• 한국어병학회지
• /
• 제28권3호
• /
• pp.145-155
• /
• 2015

The pathogenecity of atypical Aeromonas salmonicida was studied in healthy Oreochromis niloticus. Inoculum at concentration of $1.5{\times}10^8CFU/ml$ and $3{\times}10^8CFU/ml$ was injected into healthy fish through intramuscular and intraperitoneal injections. Experimentally infected Oreochromis niloticus showed ulceration at the dorsal musculature and trunk region in addition to black coloration, congested gills, exophthalmia, and ocular hemorrhage. Congested liver and kidney were recorded in post-mortem examination. Mortality of the experimentally infected Oreochromis niloticus reached 100% after intramuscular injection at concentration of $3{\times}10^8CFU/ml$. Histopathological investigation of infected organs was also performed. There was a focal area of bundles of skeletal musculature showing hyalinization. In addition, hyperplasia, congestion, and fusion were noticed in the gill lamellae. There was also congestion in the blood vessels in the ocular chamber. Severe congestion was also noticed in the central vein of liver associated with focal aggregation of the melanin pigmented cells in the parenchyma. Degenerative changes were noticed in the epithelial cells lining of kidney tubules. Plant extracts carvacrol and its biological precursor cymene were found to be effective in treating experimentally infected Oreochromis niloticus at concentration of 100 or 200 ppm.

• International Journal of Automotive Technology
• /
• 제5권3호
• /
• pp.155-164
• /
• 2004

The direct injection gasoline spray-wall interaction was characterized inside a heated pressurized chamber using various visualization techniques, including high-speed laser-sheet macroscopic and microscopic movies up to 25,000 frames per second, shadowgraph, and double-spark particle image velocimetry. Two hollow cone high-pressure swirl injectors having different cone angles were used to inject gasoline onto a heated plate at two different impingement angles. Based on the visualization results, the overall transient spray impingement structure, fuel film formation, and preliminary droplet size and velocity were analyzed. The results show that upward spray vortex inside the spray is more obvious at elevated temperature condition, particularly for the wide-cone-angle injector, due to the vaporization of small droplets and decreased air density. Film build-up on the surface is clearly observed at both ambient and elevated temperature, especially for narrow cone spray. Vapor phase appears at both ambient and elevated temperature conditions, particularly in the toroidal vortex and impingement plume. More rapid impingement and faster horizontal spread after impingement are observed for elevated temperature conditions. Droplet rebounding and film break-up are clearly observed. Post-impingement droplets are significantly smaller than pre-impingement droplets with a more horizontal velocity component regardless of the wall temperature and impingement angle condition.

• 한국진공학회지
• /
• 제8권4B호
• /
• pp.514-518
• /
• 1999

Gold (Au) is not supposed to react with sapphire(single crystalline ) under thermodynamic equillibrium, therefore, a strong adhesion between these two dissimilar materials is not expected. However, pull test showed that the gold film sputter-deposited onto annealed and pre-sputtered sapphire exhibited very strong adhesion even without post-deposition annealing. Strongly and weakly adhered samples as a result of the pull testing were selected to investigate the adhesion mechanisms with Auger electron spectroscopy. The Au/ interfaces were analyzed using a new technique that probes the interface on the film using Auger electron escape depth. It revealed that one or two monolayers of Au-Al-O compound formed at the Au/Sapphire interface when AES in the UHV chamber. It showed that metallic aluminum was detected on the surface of sapphire substrates after irradiating for 3 min. with 7keV Ar+ -ions. These results agree with TRIM calculations that yield preferential ion-beam etching. It is concluded that the formation of Au-Al-O compound, which is responsible for the strong metal-ceramic bonding, is due to ion-induced cleaning and reduction of the sapphire surface, and the kinetic energy of depositing gold atoms, molecules, and micro-particles as a driving force for the inter-facial reaction.

• KIEAE Journal
• /
• 제16권6호
• /
• pp.135-142
• /
• 2016

Purpose: The purposes of this paper are to investigate effects of indoor thermal environment on acoustical perception and effects of acoustics on indoor thermal perception, and to understand basic human perception on indoor environment. Method: Subjective assessment was performed in an indoor environmental chamber with 24 university students. Thermal conditions with PMV -1.53, 0.03, 1.53, 1.83 were simulated with a VRF system, a humidifier, a dehumidifier, and a ventilation system. Six noise sources - Cafe, Fan, Traffic, Birds, Music, Water- with sound levels of 45, 50, 55, 60 dBA were played for 2 minutes in random order. Temperature sensation, temperature preference, humidity sensation, humidity preference, noisiness, loudness, annoyance, and acoustic preference were assessed using bipolar visual analogue scales. The ANOVA and Turkey's post hoc test were used for data analysis. Result: Thermal environmental perceptions were not altered through 2 minutes noise exposure. Acoustical perceptions were altered by thermal conditions. The results were consistent with previous papers, however, the noise exposure time should be carefully considered for further development.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술대회 논문집
• /
• pp.17-17
• /
• 2010

Polycrystalline $CuInS_2$ thin films were performed from S/In/Cu Stacked elemental layer(SEL) method with post annealing. In thin method, the thin films were annealed in Vacuum of $10^{-3}$ torr or in S ambient. $CuInS_2$ thin films were manufctured by using the evaporation and the annealing with vacuum quartz furnace of sulfurization process was used in the vacuum chamber to the substrate temperature on the glass substrate the annealing temperature and characteristics thereof were investigated. The physical properties of the thin film were investigated under various fabrication conditions including the substrate temperature annealing time by XRD, FE-SEM, and Hall measurement system.