• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.1
• /
• pp.64-74
• /
• 1997

A CELTHYM(CEll-based Long-term HYdrologic Model), a pre-processor and a post-processor that can be integrated with geographic information system(GIS) were developed to predict the stream flow from the small agricultural watershed on the daily basis. The CELTHYM calculates the direct runoff from a grid using SCS curve number method and then sum up all of cells with respect to a sub-catchment area belonged to a stream grid and integrated to an outlet. Base flow of a watershed outlet was computed by integrating of the base flow of each stream grid that was averaged the sub-catchment deep-percolation and calculated with the release rate. Two kind of water budget equation were used to compute the water balance in a grid that was classified into not paddy field and paddy field. One of the two equation is a soil water balance equation to account the soil moisture of the upland, forest and excluding paddy field grid. The other is a paddy water balance equation for the paddy field, calculating the ponding depth, the effective rainfall, the deep percolation and the evapotranspiration.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.72-82
• /
• 2002

This paper presents the design technology of a Graphic Generator which drives the embedded aircraft display equipments such as HUD(Head-Up Display) and MFD (Multi-Function Display) those provide pilot with the most important mission information. The main issue of this design is how we can implement the real-time embedded graphic generator using a general purpose processor as a substitute for the obsolete the production of specific graphic processor in the military market. So we proposed two kinds of method that one is a software solution so called graphic kernel system, interpreting the display file, controlling the graphic system and pre-processing graphic primitives, the other is a hardware solution so called graphic engine, interpreting passed commands through the graphic kernel system, post-processing the looping calculation taking much of time as implemented by software. We have tested and verified the functionalities and the required performance of Graphic Generator.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.12
• /
• pp.1088-1095
• /
• 2008

5-axis NC machining has a good advantage of the accessibility of tool motion by adding two rotary axes. It offers numerous advantages such as expanding machining fields in parts of turbo machineries like impeller, propeller, turbine blade and rotor, reasonable tool employment and great reduction of the set-up process. However, as adding two rotary axes, it is difficult to choose suitable machining conditions in terms of tool path, tool posture, feedrate control at a tool tip and post-processing. Therefore in this paper, it is proposed to decide suitable machining condition through an experimental method such as adopting various tool paths, tool postures, and feedrate types. Machining experiment on AL7075 for impeller is performed to define suitable machining condition, and measurement of surface roughness on machined surfaces depended on each machining condition is performed. By defining suitable machining condition, we should have conclusion as improving the surface quality in the aspect of surface roughness and machined shape of surface.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.38-45
• /
• 1993

The feature based modeling approach is useful for post-CAD related works such as process planning and NC part programming. This paper describes the development of 'FeaTURN' system which is feature based NC part programming system for turning operation. The programming task in 'FeaTURN' system becomes easy and effective with the assistance of feature icons. The manufacturing attributes can be handled toghther with the features during input procedure. The cutter location data (CLD) is determined by the processor module. The post process module converts the CL data to machine control data (MCD). Also, the system graphically displays the tool path.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.5
• /
• pp.74-82
• /
• 1995

This paper is study on the voice dialing using HMM and post processing of the connected digits. HMM algorithm is widely used in the speech recognition with a good result. But, the maximum likelihood estimation of HMM(Hidden Markov Model) training in the speech recognition does not lead to values which maximize recognition rate. To solve the problem, we applied the post processing to segmental K-means procedure are in the recognition experiment. Korea connected digits are influenced by the prolongation more than English connected digits. To decrease the segmentation error in the level building algorithm some word models which can be produced by the prolongation are added. Some rules for the added models are applied to the recognition result and it is updated. The recognition system was implemented with DSP board having a TMS320C30 processor and IBM PC. The reference patterns were made by 3 male speakers in the noisy laboratory. The recognition experiment was performed for 21 sort of telephone number, 252 data. The recognition rate was $6\%$ in the speaker dependent, and $80.5\%$ in the speaker independent recognition test.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.10a
• /
• pp.95-102
• /
• 1994

This paper presents a Cable Stayed Bridge Construction Management System, which consists of Structural System Identification Method (SSIM), Error Sensitivity Analysis and Optimum Error Adjustment & Prediction System. The 1st System Identification Method builds an error influence matrix using the linear superposition of each error modes. The 2nd SSIM also considers the second error mode term, which shows good error factor estimation. The optimal cable adjustment can be accomplished within the allowable range of both cable tension and camber. The Post processor, constituted with Motif and GL library on SGI platform, is useful for monitoring construction stage management by displaying construction data, adjustment and prediction results at each construction step.

• Transactions of Materials Processing
• /
• v.8 no.1
• /
• pp.29-37
• /
• 1999

An analysis system for sheet metal forming(SAT_STAMP) has been developed to improve the design and tryout process by predicting the deformation behavior more precisely. This analysis system consists of forming analysis, springback analysis and post processor modules. The more accurate prediction of stress history can be achieved due to the improved contact algorithm. Continuous simulation of sequential processes can be carried out conveniently without interruption by the improved data management of the developed system. The error of data transfer between forming analysis and springback analysis is minimized using the proper shell element. Several benchmark test results and practical results are presented to show the effectiveness and reliability of this program.

• Journal of Korean Society for Atmospheric Environment
• /
• v.19 no.4
• /
• pp.427-436
• /
• 2003

This study is to establish a waste bed combustion model that can be available to assist the design of incinerators for efficient operation control of municipal waste incinerators. An unsteady one -dimensional bed combustion modeling was developed which incorporates the various sub-process models and solves the governing equations for both gases and solids in the waste bed combustion phenomena. The combustion characteristics and the properties of the combustion gas released from the bed were investigated by using a developed model. Besides, a sub-model which predicts the formation and destruction of nitrogen oxides in the waste bed was also developed as a post-processor for the waste combustion model. It is found that the reduction rate of nitrogen oxides is enhanced in the char layer.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1994.04a
• /
• pp.25-32
• /
• 1994

The pre-processor for finite to element structural analysis considering the user-friendly device is developed by using GUI. This can be used on WINDOWS' environment which is realized the multi-tasking and the concurrency by object-oriented paradigm. Data input can be done easily through menu, dialog box, automatic stepwise input and concurrent representation with the structural geometry on multiple windows. It in designed to control integratedly the pre-processing, execution and the post-processing of the finite element structural analysis program on multiple windows, and input data can be seen with result outputs at the same time. In addition, the object-oriented programming environment makes convenient revision and addition of the program components for expanding the scope of analysis and making better user environment.

• Composites Research
• /
• v.13 no.1
• /
• pp.11-24
• /
• 2000

In this paper, finite thickness and tow phase effects on the mechanical behavior were studied numerically for plain weave textile composites. Unit cell analysis based on a superposition method was employed to simulate uniaxial tensile loading condition and macro-element post-processor was used to reduce computer resource requirement. The effective moduli and micro-stress distribution were calculated for finite thick plain weave composites with phase shifts. Single layer and infinitely thick configurations were also considered for comparison.