• Nuclear Engineering and Technology
• /
• 제44권7호
• /
• pp.807-816
• /
• 2012

The Three Mile Island Unit 2 (TMI-2) accident has been studied extensively, as part of both post-accident technical assessment and follow-up computer code calculations. The models used in computer codes for severe accidents have improved significantly over the years due to better understanding. It was decided to reanalyze the severe accident scenario using current state of the art codes and methodologies. This reanalysis was adopted as a part of the joint standard problem exercise for the Atomic Energy Regulatory Board (AERB) - United States Regulatory Commission (USNRC) bilateral safety meet. The accident scenario was divided into four phases for analysis viz., Phase 1 covers from the accident initiation to the shutdown of the last Reactor Coolant Pumps (RCPs) (0 to 100 min), Phase 2 covers initial fuel heat up and core degradation (100 to 174 min), Phase 3 is the period of recovery of the core water level by operating the reactor coolant pump, and the core reheat that followed (174 to 200 min) and Phase 4 covers refilling of the core by high pressure injection (200 to 300 min). The base case analysis was carried out for all four phases. The majority of the predicted parameters are in good agreement with the observed data. However, some parameters have significant deviations compared to the observed data. These discrepancies have arisen from uncertainties in boundary conditions, such as makeup flow, flow during the RCP 2B transient (Phase 3), models used in the code, the adopted nodalisation schemes, etc. In view of this, uncertainty and sensitivity analyses are carried out using simulation based techniques. The paper deals with uncertainty and sensitivity analyses carried out for the first three phases of the accident scenario.

• Nuclear Engineering and Technology
• /
• 제44권1호
• /
• pp.61-70
• /
• 2012

In this study, a simple post-reconstruction dual-energy computed tomography (CT) method is proposed. A dual-energy CT algorithm for monochromatic x-rays was adopted and applied to the dual-energy CT of polychromatic x-rays by assigning a representative mono-energy. The accuracy of algorithm implementation was tested with mathematical phantoms. To test the sensitivity of this algorithm to the inaccuracy of representative energy value in energy values, a simulation study was performed with mathematical phantom. To represent a polychromatic x-ray energy spectrum with a single-energy, mean energy and equivalent energy were used, and the results were compared. The feasibility of the proposed method was experimentally tested with two different micro-CTs and a test phantom made of polymethyl methacrylate (PMMA), water, and graphite. The dual-energy calculations were carried out with CT images of all possible energy pairs among 40, 50, 60, 70, and 80 kVp. The effective atomic number and the electron density values obtained from the proposed method were compared with theoretical values. The results showed that, except the errors in the effective atomic number of graphite, most of the errors were less than 10 % for both CT scanners, and for the combination of 60 kVp and 70 kVp, errors less than 6.0 % could be achieved with a Polaris 90 CT. The proposed method shows simplicity of calibration, demonstrating its practicality and feasibility for use with a general polychromatic CT.

• East Asian Economic Review
• /
• 제20권3호
• /
• pp.279-309
• /
• 2016

The proposed Trans-Pacific Partnership (TPP) is a free trade agreement among 12 Pacific Rim countries whose joint gross domestic products (GDPs) account for 36 percent of world GDP and whose mutual trade accounts for approximately 24 percent of world trade. As for most proposed free trade agreements (FTAs), trade economists have provided ex ante computable general equilibrium (CGE) estimates to predict the trade, employment, and real per capita income effects of this agreement, such as ITC (2016). This paper-intended to complement these studies-examines the potential impacts of TPP beyond such traditional CGE estimates, taking a broader economic, governance, and historical perspective. First, we contrast these traditional CGE trade and welfare estimates that treat all firms within an industry as homogeneous with more recent CGE analyses that allow firms' productivities to be heterogeneous. We show that the latter models' trade predictions are much more consistent with ex post empirical evidence of average trade effects of FTAs. Second, empirical evidence now strongly confirms the existence of FTA "contagion." We review this evidence and show that predictive models of the evolution of FTAs indicate that the TPP should be formed. With China now having formed 12 FTAs and negotiating five new ones (including a sixteen member Asia-Pacific FTA), the United States would likely face considerable trade diversion without the TPP. Third, we examine empirical evidence on the likely further economic growth implications of FTAs by reducing firms' uncertainty over trade relations and trade policies. Fourth, we examine empirical evidence on the additional impact of FTAs on consolidating democratic institutions in countries. The TPP would likely help consolidate some of the less mature democracies. Fifth, we examine empirical evidence on the reductions of conflicts (and enhanced peace) between countries owing to the formations of FTAs. We conclude the paper noting that the potential net benefits to member countries of the proposed TPP extend well beyond the real income gains to households based upon traditional CGE models.

• Asian Journal of Atmospheric Environment
• /
• 제9권3호
• /
• pp.228-235
• /
• 2015

In order to clarify the thermal and hygroscopic properties of indoor particulate matter (PM) in a semiclosed subway space, which is critically important for understanding of the distinctive particle formation processes as well as the assessment of their health effects, the size-resolved PMs (i.e., $PM_{2.5}$ and $PM_{10-2.5}$) were intensively collected on the platform of Miasageori station on the Seoul Subway Line-4. The elemental concentrations in soluble and insoluble fractions were determined by PIXE from the bulkily pretreated $PM_{2.5}$. The thermal and hygroscopic characteristics of individual particles were investigated via a combination of the unique pretreatment techniques (i.e., the high-temperature rapid thermal process and the water dialysis) and SEM-EDX analysis. Iron and calcium were unequaled in insoluble and soluble $PM_{2.5}$ fractions, respectively, with overwhelming concentration. The SEM-EDX's elemental net-counts for the pre- and post-pyrolyzed PMs newly suggest that magnesium and several elements (i.e., silica, aluminum, and calcium) may be readily involved in the newly generated subway fine PM by a high-temperature thermal processing when trains are breaking and starting. Through the water dialysis technique, it turned out that calcium has meaningful amount of water soluble fraction. Furthermore, the concentrations of the counter-ions associated with the calcium in subway $PM_{10-2.5}$ were theoretically estimated.

• 한국산림과학회지
• /
• 제95권3호
• /
• pp.274-281
• /
• 2006

본 연구는 우리나라 밤나무 주산단지인 충북 충남 전북 전남 경남지역의 밤나무 재배농가(총 67호)를 대상으로 밤나무재배에 대한 경제성 분석을 실시하여 지역별 특성을 고려한 밤나무재배의 정책 자료를 제시하고자 하였다. 그 결과, 중부지방 주산단지(충북, 충남)는 남부지방 주산단지(전남, 경남)와 비교하여 ha당 평균 조수입은 2.7배, 소득은 3.9배, 순수익은 12.1배 높은 것으로 분석되었다. 즉, 남부지방 주산단지는 중부지방 주산단지와 비교하여 밤나무재배에 대한 경제성이 매우 낮은 것으로 판단되었다. 이러한 주요 원인은 밤나무의 노령화로 인한 밤 생산량 감소와 밤 품질 저하 등에 기인한다. 따라서 남부지방 주산단지에 대해서는 지속적인 밤나무 노령목 갱신 및 관리대책이 필요하다.

• Ocean Science Journal
• /
• 제40권3호
• /
• pp.177-182
• /
• 2005

The process of embryogenesis and larval development of the asteroid sea star Asterias amurensis $(U{\ddot{u}}tken)$ was observed, with special attention paid to morphological change and larval duration. In reproductive season, mature sea stars were collected under floating net cages, located in Tongyeong, southern Korea. The mature eggs are $138\;{\mu}m$ in average diameter, semi-translucent and orange in color, sperms in good condition appear light cream to white-gray in color. Embryos develop through the holoblastic equal cleavage stage and a wrinkled blastula stage that lasts about 9 hours after fertilization. Gastrulae bearing an expanded archenteron hatch from the fertilization envelope 22 hours after fertilization. At the end of gastrulation, rudiments of the left and right coelom are formed. By day 2, larvae possess complete alimentary canal and begin to feed. At this stage, the larva is called early bipinnaria. In 6-day-old larvae, the pre- and post- oral ciliated bands form complete circuits and the bipinnarial processes start to develop. By day 12, the lateral and anterior projection of the larval wall processes along the ciliated bands begins to thicken and curl, and the ciliated bands become more prominent. By day 32, early brachiolaria are presented with three pairs of brachiolar arms. Advanced brachiolaria with a well-developed brachiolar complex (three pairs of brachia and central adhesive disc) occur 6 weeks after fertilization. In the field, spawning of the sea star was observed in April to May, settlement form larvae and just settlements seem to occur from June to July, and early juveniles occur from August to September. Although we had not described the end of brachiolaria stage, it can be tentatively estimated that the duration of the pelagic stage of A. amurensis is 40 to 50 days.

• Journal of Biosystems Engineering
• /
• 제38권4호
• /
• pp.270-278
• /
• 2013

Purpose: Using agricultural machinery was not easy in the conventional shading structure, specified as a standard facility by standard cultivation methods for ginseng. Thus, this study designed the new types of facility allowing machine access by modifying the conventional type. Methods: Two types of facility (i.e. wide roof type and long & short roof type) were designed and installed in an experimental site to evaluate its growing environments and applicability of riding-type cultivator. Results: From the results of incoming light measurement, all three types (i.e. two new types and a conventional type) of shading structures blocked the incoming light after 9:00 am. The temperature distribution inside the new types was similar with the one in the conventional type, so the growth of ginseng was in good condition in all three types of facility. The riding-type cultivator was operated well with the low speed first gear of 0.13 m/s in the new types. However, a long & short typed roof needs to be raised 18 cm height in order to use the cultivator. Conclusions: With the results of this study, the new types of roof can be used in the ginseng farm in that they satisfied the growing environments for ginseng and the needs for agricultural mechanization.

• 수산해양교육연구
• /
• 제28권4호
• /
• pp.957-970
• /
• 2016

This study diagnosed the status of marine environmental impact assessment(MEIA) for project near the habitat of marine protected seagrass species such as Zostera caespitosa, Zostera asiatica, Phyllospadix iwatensis. For the preparation of a marine environmental impact statement, different monitoring parameters are used without any specific guideline for the assessment of current status. And also, both tools and techniques for MEIA are needed to improve for implementing. The monitoring plans and parameters are not considered well with the accuracy of the environmental predictions and effectiveness of any applicable mitigation measures. This study suggested the reasonable standard of the MEIA for the conservation of the marine protected seagrass species which have the habitat located near affected area. The inshore seagrasses need to be monitored including shoot count based on the "No Net Loss of Seagrass" as part of the monitoring parameters to assess the status of marine environment of environmental impact statement. In a process of effect prediction, we suggested a concentration of 10 mg/L suspended solids which added by the new developmental project near seagrasses habitat, referring to study of overseas case. But a further study for an appropriate standard is necessary effectively. In a mitigating process, priority needs to be considered in order of avoidance, minimization, reduction, compensation. In a post-monitoring process, it is necessary to monitor the seagrass species abundance to identify the variation of b/a (before and after) project. And in a case of implementing transplantation, survival rate need to be included to determine a success of project.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.910-920
• /
• 2008

In Korea, more than 70% of the territory consists of mountains. Therefore, the construction of roads and railways has generally involved with a steep rock slope in which the event of rockfalls are often occurred due to the weathered rock conditions and rainfalls etc. This is dangerous when the rock falls into the road and railway on which vehicles and trains are running. In order to prevent such rockfalls, the rockfall protection fence consisting of post, wire rope, and PVC coating steel net has most used at the bottom of rock slopes. In a general practice, an absorbing rockfall energy, 50kJ is specified by the Ministry of Construction and Transportation. However, questions still remain about whether the rockfall protection fence works effectively or not. In this study, a typical wire rope used in the standard rockfall protection fence was replaced by the high carbon steel wire rod and to validate its capacity of rockfall energy absorbing the field rockfall tests were conducted. The testing results show that a new rockfall protection fence using the high carbon steel wire rods can absorb the rockfall energy more than 50kJ and 20% of construction cost was saved in comparison with the previous rockfall protection fence.

• Nuclear Engineering and Technology
• /
• 제45권7호
• /
• pp.941-950
• /
• 2013

The Korean Nuclear-Hydrogen Technology Development (NHTD) Plan will be performing irradiation testing of coated particle fuel at HANARO to support the development of VHTR in Korea. This testing will be carried out to demonstrate and qualify TRISO-coated particle fuel for use in VHTR. The testing will be irradiated in an inert gas atmosphere without on-line temperature monitoring and control combined with on-line fission product monitoring of the sweep gas. The irradiation device contains two test rods, one has nine fuel compacts and the other five compacts and eight graphite specimens. Each compact contains about 260 TRISO-coated particles. The irradiation device is being loaded and irradiated into the OR5 hole of the in HANARO core from August 2013. The device will be operated for about 150 effective full-power days at a peak temperature of about $1030^{\circ}C$ in BOC (Beginning of Cycle) during irradiation testing. After a peak burn-up of about 4 atomic percentage and a peak fast neutron fluence of about $1.7{\times}10^{21}\;n/cm^2$, PIE (Post-Irradiation Examination) of the irradiated coated particle fuel will be performed at IMEF (Irradiated Material Examination Facility). This paper reviews the design of test rod and irradiation device for coated particle fuel, and discusses the technical results for irradiation testing at HANARO.