• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.82-87
• /
• 2003

Post-processing programs play an important role in the CFD data visualization and analysis. A variety of post-processing softwares have been developed and are being used in the CFD community. Developing a good quality of post-processing program requires dedication and efforts. In this paper an experience obtained through previous studies and developing post-processing programs are introduced which includes data structure and visualization algorithms.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.2 s.314
• /
• pp.137-143
• /
• 2007

The P-ECLMS algorithm adapted the existing Post-Processing method occurs the distortion of the near-end signal at the double-talk situation. To solve this problem, we propose the SP-ECLMS algorithm which makes the Post-Processing coefficient differently at the case of the single-talk and the double-talk. When the correlation level is not output less than 30%, the proposed algorithm output the original signal to prevent the signal's distortion.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.210-218
• /
• 1999

Sheet deposition type rapid prototyping system have many advantages : high build speed, low operating cost, large part size, no phase change, no need for support generation, and forth. However, those sheet deposition type rapid prototyping system require an additional post processing to remove excessive material attached to the part. This post processing is time consuming and labor intensive. Moreover, it is difficult for those system to fabricate parts with hollow cores and internal cavities. A new sheet deposition type rapid prototyping system that minimizes the post processing is proposed. The proposed system automatically removes excessive material in a peeling-off process between two cutting processes. In this way, the proposed system can reduce the post-processing time and cost as well as the limitation of the feasible geometric shapes in the conventional sheet deposition system.

• Food Science of Animal Resources
• /
• v.41 no.4
• /
• pp.589-607
• /
• 2021

Meat proteolytic systems play a crucial role in meat tenderisation. Understanding the effects of processing technologies and post-mortem storage conditions on these systems is important due to their crucial role in determining the quality characteristics of meat and meat products. It has recently been proposed that tenderisation occurs due to the synergistic action of numerous endogenous proteolytic systems. There is strong evidence suggesting the importance of μ-calpain during the initial post-mortem aging phase, while m-calpain may have a role during long-term aging. The caspase proteolytic system is also a candidate for cell degradation in the initial stages of conversion of muscle to meat. The role of cathepsins, which are found in the lysosomes, in post-mortem aging is controversial. Lysosomes need to be ruptured, through aging, or other forms of processing to release cathepsins into the cytosol for participation in proteolysis. A combination of optimum storage conditions along with suitable processing may accelerate protease activity within meat, which can potentially lead to improved meat tenderness. Processing technologies such as high pressure, ultrasound, and shockwave processing have been reported to disrupt muscle structure, which can facilitate proteolysis and potentially enhance the aging process. This paper reviews the recent literature on the impacts of processing technologies along with post-mortem storage conditions on the activities of endogenous proteases in meat. The information provided in the review may be helpful in selecting optimum post-mortem meat storage and processing conditions to achieve improved muscle tenderness within shorter aging and cooking times.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.2
• /
• pp.35-41
• /
• 2021

In this study, improved path tracking control algorithm based on pure pursuit algorithm is newly proposed by using improved lane detection algorithm through real time post-processing with interpolation methodology. Since the original pure pursuit works well only at speeds below 20 km/h, the look-ahead distance is implemented as a sigmoid function to work well at an average speed of 45 km/h to improve tracking performance. In addition, a smoothing filter was added to reduce the steering angle vibration of the original algorithm, and the stability of the steering angle was improved. The post-processing algorithm presented has implemented more robust lane recognition system using real-time pre/post processing method with deep learning and estimated interpolation. Real time processing is more cost-effective than the method using lots of computing resources and building abundant datasets for improving the performance of deep learning networks. Therefore, this paper also presents improved lane detection performance by using the final results with naive computer vision codes and pre/post processing. Firstly, the pre-processing was newly designed for real-time processing and robust recognition performance of augmentation. Secondly, the post-processing was designed to detect lanes by receiving the segmentation results based on the estimated interpolation in consideration of the properties of the continuous lanes. Consequently, experimental results by utilizing driving guidance line information from processing parts show that the improved lane detection algorithm is effective to minimize the lateral offset error in the diverse maneuvering roads.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.648-661
• /
• 1997

This paper presents a new method for post-processing of coded images based upon the low-pass filtering followed by the projection onto the NQCS (narrow quantization constraint set). We also investigate how the proposed method works on JPEG-coded real images. The starting point of the QCS-based post-processing techniques is the centroid of the QCS, where the original image belongs. The low-pass filtering followed by the projection onto the QCS makes the images lie on the boundary of the QCS. It is likely that, however, the original image is inside the QCS. Hence projection onto the NQCS gives a lower MSE (mean square error) than does the projection onto the QCS. Simulation results show that setting the narrowing coefficients of the NQCS to be 0.2 yields the best performance in most cases. Even though the JPEG-coded image is low-pass filtered and projected onto the NQCS repeatedly, there is no guarantee that the resultant image has a lower MSE and goes closer to the original image. Thus only one iteration is sufficient for the post-processing of the coded images. This is interesting because the main drawback of the iterative post-processing techniques is the heavy computational burden. The single iteration method reduces the computational burden and gives us an easy way to implement the real time VLSI post-processor.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.5
• /
• pp.82-92
• /
• 1997

In this paper, we propose post-rpocessing method that corrects a misrecognized character by generated a characater recognizer using morphological analyzer and spelling corrector. The proposed post-processing consists of sthree phases : First, our method pass through morhological analyzer which only outputted necessary information for spelling correcting, doesn't analyze a bundle of phrases, and detects the location of misrecognized character. Second, tagging the generated candidate character using the information of character substitution table and grapheme substitution/separating table. Then we retry analysis after the misrecognition character has been substituted. Finally we select table, we investigate misrecognized charcters in CORPUS. Reliability analysis used to frequency of randomly selected about 100,000 words in CORPUS. A korean character recognizer demonstrates 93% correction rate without a post-processing. The entire recognition rate of our system with a post-processing exceeds 97% correction rate.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.149-158
• /
• 2004

In most RP processes, the inherent stair-stepped surfaces and shrinkage-induced warping of the parts require post processing such as surface finishing. To minimize such defects, VLH-ST, a newly developed RP process, employs a 3.9-mm thick expandable polystyrene (EPS) foam sheet and a hot wire to contour it to have slant linear-interpolated sides. The use of relatively thick sheets for layers, however, limits the process capability of constructing fine details, especially smaller than the layer thickness. This study is focused on the development of a post processing method fo fine details of VLM-ST parts. The post-processing tool was designed to meet all the requirements for the desirable post processing. It adopted a hot wire as a means of melting the EPS foam sheet. Various basic experiments on the post processing were carried out to obtain the optimal process conditions. The dominant process parameters such as the radiated heat input, the tool speed, and the gap between the tool tip and the foam sheet (tool height) were considered in the experiments. The effectiveness of the developed post-processing method fo forming or engraving fine details on the VLM-ST parts has been thus demonstrated. The experiments on engraving several sets of letters, such as CANESM, 인간, and 한국과학기술원, on the EPS foam sheet were carried out. In addition, a flowery shape was engraved on a three-dimensionally curved surface of a pottery-shape VLM-ST part.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.9
• /
• pp.839-844
• /
• 2017

In the past few years, three-dimensional (3D) printing has been developed as a rapid prototyping (RP) technique. The fused deposition modeling (FDM)-type 3D printing is one of the most useful RP methods; however, it still has several disadvantages, such as low conductivity, heat degradation, and low surface quality. In this study, test specimens are fabricated using an FDM-type 3D printer with an ABS material. Then, the specimens undergo post-processing on submerging in acetone with various processing times. As the processing time increases, surface roughness is enhanced significantly within the first five seconds by chemical processing, following which the processing effects are reduced. Furthermore, post processing causes the ultimate strength and strain to increase slightly with increased processing time.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1111-1117
• /
• 2003

NURBS (Non Uniform Rational B-Spline) is widely used in CAD system and NC data for high speed machining. Conventional CAM system changes NURBS surface to tessellated meshes or Z-map model, and produces linear tool path. The linear tool path is not good for precise machining and high speed machining. In this paper, an algorithm to change linear tool path to NURBS one was studied, and the machining result of NURBS tool path was compared with that of linear tool path. The N-post, post-processing and virtual machining software was developed. The N-Post post-processes linear tool path to NURBS tool path and quickly shades machined product on OpenGL view and compares a machined product with original CAD surface. A virtual machined model of original tool path and post-processed tool path was compared to original CAD model. The machining error of post-processed NURBS tool path was reduced to 43%. The original tool path and NURBS tool path was used to machine general model using same machine tool and machining condition. The machining time of post-processed NURBS tool path was reduced up to 38%.