• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.514-521
• /
• 2006

In strengthening structure, the external post-tensioning method which secure clearness in the structure analysis process is adopted to bridge as well as architecture structure. Therefore, the major objective of this study is to investigate the effects and application of external post-tensioning method for steel plate girder bridge. It analyzed the mechanical behaviors of steel plate girder bridge with applying external post-tensioning on the finite element analysis and laboratory test for the dynamic characteristics. As a result, the reinforcement of steel plate girder bridge the external post-tensioning method are obviously effective for the response which is non-reinforced. The analytical and experimental study are carried out to investigate the post-tension force decrease stress and deflection on steel plate girder bridge for serviceability. It is investigated that the change degree of natural frequency is very low with applying the external post-tensioning method. The servicing steel plate girder bridge with external post-tensioning is the reasonable reinforcement measures which could be secured the stability of dynamic behavior and increase a dropped durability.

• Journal of the Korean Society for Railway
• /
• v.11 no.2
• /
• pp.126-138
• /
• 2008

This paper proposes the preservation method that can effectively process short messages at mobilePOST SMSC(Short Message Service Center) platform on CDMA(Code Division Multiple Access). There are three techniques for the preservation method. First one is shared memory technique where several processes within the system share same memory to process transmission of short messages with maximum performance. Second one is to back-up messages in shared memory to the file system to prevent lost during system initialization or other unstable period. Third technique is that when transmission of short message was completed, finished message is moved from the shared memory to relational database for accounting purposes.

• Journal of the Korean Ceramic Society
• /
• v.35 no.9
• /
• pp.945-952
• /
• 1998

Ferroelectric Sr0.8Bi2.4Ta2O9 stock solutions were prepared by MOD(Metaloganic Decompostion) process. The phase transformation for the layered perovskite of the SBT thin films by changing RTA(Rapid her-mal Annealing) temperatuer from 700$^{\circ}C$to 780$^{\circ}C$ were observed using XRD and SEM. Layered perovskite phase began to appear above 740$^{\circ}C$ and then SBT thin films were annealed at 800$^{\circ}C$ for 1hr for its com-plete crystallization. The specimens showed well shaped hysteresis curves without post annealing that car-ried out after deposition of Pt top electrode. The SBT thin films showed the asymmetric ferroelectric pro-perties. It was confirmed that the properties were caused by interface effect to SBT and electrode by leak-age current density measurement and asymmetric properties reduced by post annealing. At post annealing temperature of 800$^{\circ}C$ remanant polarization values (2Pr) were 6.7 9 ${\mu}$C/cm2 and those of leakage current densities were 3.73${\times}$10-7 1.32${\times}$10-6 A/cm2 at 3, 5V respectively. Also bismuth bonding types of SBT thin film surface were observed by XPS.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.2
• /
• pp.155-159
• /
• 2015

Light emitting devices (LEDs) are widely used in the liquid crystal display (LCD) industry, especially for LCD back light units. Therefore, much research has been performed to minimize manufacturing costs. However, the current process does not process LED chips from broken substrates even though the substrate is expensive sapphire wafer. This is because the broken substrates lose their alignment marks. After pre-processing, LED dies are glued onto blue tape to continue post-processing. If auxiliary alignment marks are stamped on the blue tape, post-processing can be performed using some of the LED dies from broken substrates. In this paper, a novel stamper module that can stamp the alignment mark on the blue tape is proposed, designed, and fabricated. In testing, the stamper was reliable even after a few hundred stamps. The module can position the stamp and apply the pattern effectively. By using this module, the LED industry can reduce manufacturing costs.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.72-81
• /
• 2012

This study investigates structural, fatigue and modal analyses at bicycle suspension seat post. When weight is applied to the saddle, models 1 and 2 have the weakest strength at the part connected with saddle. And model 2 is greater total deformation and equivalent stress than model 1. Among the cases of nonuniform fatigue loads at models 1 and 2, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample history' with the average stress of 0 to $-10^4MPa$ and the amplitude stress of 0 to $10^4MPa$, the possibility of maximum damage becomes 4%. This stress state can be shown with 5 to 7times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. Model 1 has better impulse relaxation and passenger sensitivity than model 2. The structural result of this study can be effectively utilized with the design of bicycle suspension seat post by investigating prevention and durability against its damage.

• Korean Journal of Materials Research
• /
• v.16 no.12
• /
• pp.766-770
• /
• 2006

The frictional behavior of oxide films on top of the plasma nitrocarburized compound layers was investigated in terms of post-oxidation treatment temperatures. The post-oxidation treatment at both temperatures($400^{\circ}C,\;500^{\circ}C$) produced magnetite($Fe_3O_4$) films which led to a significant enhancement in corrosion resistance. However, this process did not result in any improvement in frictional behavior of the nitrocarburized surface. The wear mechanisms were governed predominantly by the abrasive action of the slider on the surface irrespective of the counterface material(SiC and Bearing steel). When the specimen was sliding against a SiC counterface, the oxide films were destroyed during the early stage of the sliding process and the wear debris of the oxide film at the sliding track had a great influence on the friction coefficient. On the other hand, when sliding against a bearing steel counterface, the slider was mainly worn out due to the much higher hardness of the surface hardened layer. The fluctuation of the friction coefficient of $400^{\circ}C$-oxidized/ nitrocarburized specimen is much severer than that of $500^{\circ}C$ specimen, due to the less amount of wear debris.

• Korean Journal of Remote Sensing
• /
• v.16 no.4
• /
• pp.367-373
• /
• 2000

Natural and artificial land features are very dynamic, changing somewhat repidly in our lifetime. It is important that such changes are inventoried accurately so that the physical and human processes at work can be more fully understood. Change detection is a technique used to determine the change between two or more time periods of a particular object of study. Change detection is an important process in monitoring and managing natural resources and urban development because it provides quantitative analysis of the spatial distribution in the population of interest. The purpose of this research is to detect environmental changes surrounding an area of Mountain Moscow, Idaho using Landsat Thematic Maper (TM) images of (July 8, 1990 and July 20, 1991). For accurate classification, the Image enhancement process was performed for improving the image quality of each image. A SPOT image (Aug. 14, 1992) was used for image merging in this research. Supervised classification was performed using the maximum likelihood method. Accuracy assessments were done for each classification. Two images were compared on a pixel-by-pixel basis using the post-classification comparison method that is used for detecting the changes of the study area in this research. The 'from-to' change class information can be detected by post classification comparison using this method and we could find which class change to another.

• Asia-Pacific Journal of Business
• /
• v.11 no.2
• /
• pp.235-244
• /
• 2020

Purpose - This study estimated the value of the post-use of Alpine stadium in Jeongseon as a tourist attraction, which is one of the 2018 Pyeongchang Winter Olympics facilities, and identified determinant factors on the willingness to pay (WTP). Design/methodology/approach - A dichotomous-choice model of contingent valuation method (CVM) that is known for an effective tool was used to calculate the value. The questionnaire was conducted on 650 visitors to major tourist destinations in Jeongseon and 629 copies of the valid samples were analyzed. Findings - The results shows that determinate factors on the WTP are; suggestion cost, need (application of Ecotourism Program to the Restoration Process), agree(agree to Ecotourism Program in the Restoration Process) and age. Also, the WTP on the facility is 16,296 won per person. Research implications or Originality - This study estimates the value of the post-utilization of Alpine Stadium of the 2018 Pyeongchang Winter Olympics facilities, which have been experiencing conflict in recent years. For this reason, the findings of the paper will provide meaningful information for tourism development and management policies of the region.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.5
• /
• pp.285-297
• /
• 2023

The effects of aging treatment sequence, specifically pre-aging and post-aging, on the microstructure and mechanical properties of Al-Zn-Mg-Cu aluminum alloys has been studied in comparison to symmetrically rolled specimens. In symmetrically rolled specimens, a straight-band precipitation distribution was observed, whereas asymmetrically rolled specimens exhibited a curved-band microstructure of fine precipitates. Notably, the asymmetrically rolled specimens displayed higher strengths. In the case of post-aging, the aging process occurred after rolling, and the dislocations generated during rolling acted as nucleation sites for precipitates during aging. This resulted in the formation of fine precipitates, contributing to improved mechanical properties compared to symmetric rolling. To enhance strength of the Al-Zn-Mg-Cu aluminum alloys, asymmetric rolling proves to be more effective than symmetric rolling, with post-aging showing greater efficacy than pre-aging.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.2 no.1
• /
• pp.5-17
• /
• 2009

We developed bone-insertion pin screw that can be used for purposed treatment by combining with the external fixator which is the subsidiary tool for the healing of the fracture (open fracture of long bone, reconstruction of soft tissue and arthrodesis etc.) Furthermore, for the frist time, we succeeded in domestic-producing this screw, using specially-designed treating tool stuck on the lathe machine and abrasive blasting machine, and the post-dealing technique and process. In comparison with other foreign products, we could get more desirable results in various tests. This pin screw has 103% characteristics of the average of foreign products. Thus we'd like to introduce design techniques, post-dealing process and result of function tests.