• 한국분무공학회지
• /
• 제6권1호
• /
• pp.25-34
• /
• 2001

Several efforts to meet the exhaust gas regulation have been undertaken by many researchers in recent years. Main researches are on development of design techniques of intake port and combustion chamber, atomisation of fuel and precise control of air-fuel ratio, post-treatment of exhaust gas and so on. Engine technology is changed from PFI to GDI to correspond with exhaust gas regulation. GDI technique makes it possible to preserve lean air-fuel ratio and control accurate air-fuel ratio. Nevertheless, It is not cleared that information of spray characteristics and atomization process are very dependent on fluctuation of pressure and change of temperature in intake stroke. In this study, a constant volume combustion chamber is manufactured to investigate various fluctuations of in-cylinder pressure for injection duration. It is taken photographs of injection process of conventional GDI injector using PMAS. Then, it was verified experimently that ambient conditions as temperature and pressure of combustion chamber have effects on process of spray growth and atomization of fuel.

• 한국연초학회지
• /
• 제21권1호
• /
• pp.26-35
• /
• 1999

Effects of $\alpha$-difluoromethylornithine (DFMO) and $\alpha$-difluoromethylarginine (DFMA), inhibitors of polyamine syntheic enzymes (ornithine decarboxylase, arginine decarboxylase), on ovary were investigated during pupal-adult development of Helicoverpa assulta. Two inhibitors (DFMO, DFMA) showed definite inhibition effects on ovarian development. The inhibition effect on ovaries weight was more marked in DFMA-injection than that observed in DFMO-injection. Two inhibitors (DFMO, DFMA) gave rise to a peculiar decrease in ornithine decarboxylase (ODC) or arginine decarboxylase (ADC) activity in ovaries, 72 hrs (5-day old pupa) post injection. However, DFMO clearly exhibited supression of ODC activity after 96 hrs (6-day old pupa). In addition, two inhibitors (DFMO, DFMA) diminished putrescine content in the ovary. The spermidine level was slightly decreased by each injection of the inhibitors. However, two inhibitors (DFMO, DFMA) raised the spermine content at certain developmental stages in the ovary. Although the effect of DFMA was less severe, two inhibitors (DFMO, DFMA) caused not only an overall delay in ovarian development, but also abnormalities in cellular differentiation. Noted effects in the pupal ovary were the appearance of irregular nurse cells and partial destruction of follicle epidermal cells. Adult ovary showed rapid degradation of nurse cells, a reduction in the number of follicle epidermal cells and immature oocytes that had a low yolk content.

• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.8-13
• /
• 2015

In this study, we fabricated and characterized a nanostructured surface based on a plastic injection molding with a local mold heating (LMH) system. A metal mold core with a closed packed nano convex array (CVA) was achieved by integrated engineering procedures: (1) master template fabrication by anodic aluminum oxidation (AAO), (2) nickel electroforming (NE) process, and (3) post-processing by precision machining. The nickel mold core was utilized to replicate a surface with a closed packed nano concave-array (CCA) based on injection molding using cyclic olefin copolymer (COC) as a plastic material. In particular, an LMH system was introduced to enhance transcription quality of the nano structures by delaying solidification of molten polymer near the surface of the mold core.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권5호
• /
• pp.653-658
• /
• 2000

To examine the effects of lipoic acid on metabolic response to a ${\beta}$-agonist, isoproterenol, in broilers, chicks were fed dietary lipoic acid at levels of 0 (control) or 50 mg/kg for 24 d. At 27 d of age, chickens were randomly selected. Isoproterenol dissolved in 0.9% saline was injected into the wing vein at a dosage of 2 mg per kg BW; then, blood samples were taken at 0, 10, 20, 30, 60, 90, 120, and 180 min. Amounts of plasma glucose, NEFA, triglyceride and total cholesterol were determined. Dietary lipoic acid reduced only plasma total cholesterol by 25%. Following isoproterenol injection, plasma glucose in both groups increased for 20 min; then, it returned to its basal concentration. In contrast, the maximal reductions in plasma NEFA and triglyceride in both groups (20 to 30 min) were confirmed by isoproterenol injection. In addition, while glucose returned to the basal level, plasma NEFA in the lipoic acid-treated chickens increased above the basal or control value during the 60 to 180 min post-injection. The present study suggests that the dietary administration of lipoic acid elicits fatty acid mobilization in ${\beta}$-adrenergic response to isoproterenol when the basal level of plasma glucose is maintained.

• Journal of Korean Biological Nursing Science
• /
• 제19권1호
• /
• pp.11-17
• /
• 2017

Purpose: To determine the effects of neck and back touch on Ultrasonic Vocalization (UV) and the Rat Grimace Scale (RGS) in rats touched by the human hand as an intervention for reducing pain and anxiety associated with intramuscular injections. Methods: This study was a randomized, controlled, pre-test/post-test design study. Twenty male Sprague-Dawley rats were assigned to either the experimental or control groups (n= 10 rats/group). The experimental group was touched in a manner similar to massaging the rat's neck and back twice a day for one week. The two groups received two intramuscular injections. The 22kHz and 50kHz UV and the RGS scores were measured before and after each intramuscular injection. Results: The 22kHz UV and RGS score were significantly higher in the control group than in the experimental group when the first intramuscular injection was administered; whereas, no difference between the experimental and the control groups were observed when the second intramuscular injection was administered. There was no statistical difference in the 50kHz UV between the two groups when the first and second injections were administered. Conclusion: This study found that touching was an effective intervention method to reduce negative emotions and pain in rats receiving their first intramuscular injection.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 금형가공 심포지엄
• /
• pp.253-259
• /
• 2002

Micro cell structures with high aspect ratio were fabricated by injection molding method. The mold inserts had dimension $1.9cm\times8.3cm$ composed of a lot of micro posts and were fabricated by LIGA process. The size of the micro posts was $157{\mu}m\times157{\mu}m\times500{\mu}m$ and the gaps between two adjacent posts were $50{\mu}m$. Using Polymethylmethacrylate (PMMA) injection molding was performed. The key experimental variables were temperature, pressure, and time. By controlling these, good shaped mim cell structures with $50{\mu}m$ in wall thickness and $500{\mu}m$ in depth were obtained. In order to understand micro molding mechanism, shape changes of molded PMMA were studied with experimental variables. And the durability of mold insert was investigated, too. The results show that the most important factor in molding processes was the mold temperature that is closely related to the filling of the melt into the micro cavity. And the holding time before cooling showed a great effect on the quality of molded PMMA.

• The Korean Journal of Pain
• /
• 제36권1호
• /
• pp.106-112
• /
• 2023

Background: Most international bodies recommended against musculoskeletal steroid injection during the COVID-19 pandemic, fearing that the immunosuppressive effects of the steroid could worsen COVID-19 infection, thus prolonging the suffering of patients with severe musculoskeletal disease. The authors' aim is to analyze the risk of COVID-19 infection after musculoskeletal injections. Methods: This is a retrospective study of patients who visited a sports medicine clinic and received musculoskeletal steroid injections between January 1, 2020 and February 28, 2021. The collected data was compared with the national COVID-19 registry to identify positive COVID-19 patients. The patients were only considered positive for COVID-19 following corticosteroid injection within 3 months after injection. Results: Out of 502 steroid injections; 79.7% (n = 400) received a single injection in one day, 19.1% (n = 96) received steroid injections at 2 sites in one day, and 1.2% (n = 6) received steroid injections at 3 sites in one day. Using the Fisher's exact test, there was no statistically significant association of COVID-19 infection between the steroid group and control group (relative risk, 1.44; 95% confidence interval, 0.9-23.1, P = 0.654). Only one patient contracted mild COVID-19 with no post COVID complications. Conclusions: The authors recommend the use of musculoskeletal steroid injections in clinically indicated situation without having increased risk of COVID-19.

• Journal of Oral Medicine and Pain
• /
• 제48권1호
• /
• pp.25-30
• /
• 2023

We present the case of a 60-year-old male with post-macrotrauma disc displacement and retrodiscitis, in which temporomandibular joint (TMJ) injection and manual therapy were used to alleviate his symptoms. He visited our clinic with complaints of pain and swelling in his right facial area and malocclusion of his right side teeth after being hit on the right side of his face five days earlier. During clinical and radiological examinations, the inflammatory state of the joint and disc displacement on the right side, which led to malocclusion, were noted. At the initial visit, we performed TMJ intracapsular injection and prescribed medications to control pain and inflammation. Simultaneously, manual manipulation was performed to relocate the disc. The same treatments were employed two days later. However, 10 days after the first visit, his symptoms did not mitigate substantially. We also performed magnetic resonance imaging (MRI), prescribed nortriptyline, and created a stabilization splint. MRI images depicted inflammatory disc displacement and joint effusion in the right TMJ. Based on the accurate diagnosis, we kept administering a stabilization splint, intra-articular injection, and medication. His signs and symptoms were alleviated 20 days after the initial visit and did not reoccur for the next 40 days.

• 열처리공학회지
• /
• 제36권4호
• /
• pp.215-222
• /
• 2023

3Y-TZP (3 mol% yttria-stabilized tetragonal zirconia polycrystals, 3Y-TZP) ceramics are emerging as dental implant materials due to their superior optical and mechanical properties as well as excellent biophysical properties, in spite of low bioactivity. In this study, we investigated to sintered properties and microstructural defects of dental zirconia implants fabricated by ceramic injection molding and post-HIP (Hot isostatic pressing) processing and analyzed the processing parameters related with the obtainment of its high sinterd density. Sintered and microstructural parameters, i.e, apparent density, grain size and phase composition of zirconia implants fabricated by injection molding were dependent on the fixtute size and implant type. Maximum sintered density of 99.2% and minimum grain size of 0.3-0.4 ㎛ were obtained from large-scaled 2-body sample. In 1-body ceramic implant, high sintered density of 99.5% was obtained, but it had a little monoclinic phase and wide grain size distribution.

• 한국어병학회지
• /
• 제25권3호
• /
• pp.211-219
• /
• 2012

암피실린 (ampicillin, AM) 을 넙치 (평균체중 300g, $20{\pm}1.0^{\circ}C$) 에 1일 1회 경구 (10, 20, 40mg/kg), 근육주사(5, 10, 20mg/kg), 약욕 (10, 20, 40ppm; 1시간) 한 다음, 경시적 (1시간~360시간) 으로 혈장 내 AM의 잔류량을 HPLC로써 분석하였다. 10, 20 및 40mg/kg로 경구 투여한 경우, 최대혈중농도가 모두 10시간째 각각 $3.62{\pm}0.97$, $5.20{\pm}0.70$ 및 $11.18{\pm}0.87{\mu}g/ml$로 나타났으며, 이들은 각각 144, 360 및 360시간째 검출되지 않았다. 5, 10 및 20mg/kg의 농도로 근육주사한 경우, 최대 혈중농도가 모두 5시간째 $6.92{\pm}1.29$, $9.89{\pm}2.22$ 및 $19.85{\pm}2.97{\mu}g/ml$를 나타내었으며, 이들은 각각 216, 264 및 264시간째 혈중에서 검출되지 않았다. 10, 20 및 40ppm의 농도로 약욕한 경우, 최대혈중농도가 모두 3시간째 $4.39{\pm}1.10$, $9.57{\pm}1.51$ 및 $11.61{\pm}1.92{\mu}g/ml$로 나타났으며, 이들은 각각 264, 264 및 360시간째 혈중에서 검출되지 않았다. 이로써 경구, 주사 및 약욕 투약에 의한 넙치 혈액 중 분포와 배설정도는 투약량에 의존적 경향이라는 것을 알 수 있었다.