• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.451-456
• /
• 2016

Because GPS signals are weak, system jamming is a real and present danger. This can happen when the receiver is subjected to intentional or unintentional interference by a transmitter. If the jamming signal is strong enough, the receiver can be operated to take corrective action automatically. Current methods to protect GPS receiver from jamming condition are based on spatial filtering. In this paper, the beamforming as referred to in signal processing technique used in arrays for directional signal reception was suggested and analyzed for anti-jamming. In order to change the directionality of the array when receiving a jamming signal, a beamformer can control the signal at each sensor. Therefore, cutoff angle ${\theta}$ was measured in the opposite direction of the jammer. GPS signals are only processed when the antenna element is within inside the cutoff angle. As a result, GPS positioning can be used in condition under cutoff angle $30^{\circ}$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.331-335
• /
• 2016

When a boating accident, such as a January number three, the customer's risk management issues emerged. Ships and accident risk in confined spaces such as risk management to locate the customer and dangers of probation is available. In this paper, aboard after consent to obtain information for customers to wrist to customers, webbing or portable device embedded in devices and Wireless sensor information Input was attached, disposable consumer information. Customer on board the ship setting for location analysis and positioning according to information communication protocol, ships, each customer's real-time location information on the screen, 3 the foundation of d customers on the floor Can be designed to inform. Threshold designed to reduce the error of the information to analyze the position in current position and errors. Also, to system attacks would control the situation of accident and emergency jaenanguk server with real-time information transmission of information outside the emergency during a disaster, search and Disaster relief to be possible.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.1
• /
• pp.73-79
• /
• 2012

Kiosks are widely used in drive-thru systems in parking lots or on the highway to provide various services to drivers. However, the driver must stop at an exact location to access the kiosk, since its panel is fixed. In order to improve the kiosk accessibility, in this study we developed a manipulator that can adjust the position of the kiosk panel. The number of active joints was minimized to lower the cost, whereas a parallelogram mechanism and passive joints were adopted to increase its convenience for the users. Furthermore, a safety mechanism using springs and a cam was designed to ensure the safety of the user in the case of an emergency. The performance of the position controller and the safety mechanism were verified through various tests. In addition, the proposed collision reaction strategy improved the safety performance of the kiosk system.

• Spatial Information Research
• /
• v.19 no.6
• /
• pp.111-121
• /
• 2011

In this paper, we proposes a sensor node positioning algorithm that utilizes the geo-spatial elements and considers the factors to represent the propagation loss generated by the various obstacles in the urban wireless environments. First, we measures the propagation loss about the radio frequencies in major road of the urban, and defines the correlation between the measured loss and the environment information for the road and its surrounding get from Urban GIS. Secondly, through the utilization of the loss-environment correlation, we describes the detailed instruction for requiring the radio coverage decision and deploy system implementation for the wireless sensor node in urban. By the consideration of interference factor by the building and the linear structure of road, we can evaluate the path loss below 5dB RMS error. And, we proposes the way to revise the sensor node deployment based on the corelation and the measured path loss.

• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.94-102
• /
• 2015

Optical camera communication (OCC) is an extension of Visible Light Communication. Different from traditional visible light communication, optical camera communications is an almost no additional cost technology by taking the advantage of build-in camera in devices. It was became a candidate for communication protocol for IoT. Camera module can be easy attached to IoT device, because it is small and flexible. Furthermore almost smartphone equip one or two camera for both back and font side with high quality and resolution. It can be utilized for receiving the data from LED or positioning. Actually, OCC combines illumination and communication. It can supply communication for special areas or environment where do not allow Radio frequency such as hospital, airplane etc. There are many concept and experiment be proposed. In this paper we proposed utilizing Android smart-phone camera for receiver and introduce new approach in modulation scheme for LED at transmitter. It also show how Manchester coding can be used encode bits while at the same time being successfully decoded by Android smart-phone camera. We introduce new data frame format for easy decoded and can be achieve high bit rate. This format can be easy to adapt to performance limit of Android operator or embedded system.

• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.60-66
• /
• 2010

This paper deals with a post-processing of GPS receiver data in order to acquire a reference flight trajectory of an aircraft test. The flight test using an aircraft that is carried out several times since 2007 is the integrated test to verify the performance of the tracking and communications facilities in Naro Space Center and Jeju Tracking Center. In order to analyze performance of the tracking and navigation equipments, true reference data should be used for performance comparisons. Therefore off-the-shelf commercial GPS receiver, DL-V3 made by NovAtel Inc., is operated on the test to collect the GPS navigation data and the collected data is post-processed by GrafNav which is the off-the-shelf post-processing program made by NovAtel Inc. Through the post-processing of the collected data, a reference trajectory is generated with small error range about several decade centimeter level.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.3
• /
• pp.167-174
• /
• 2011

This paper proposed a smart-phone based user movement state identification algorithm. Then movement state of the user is identified by calculating the location and moving speed using the GPS sensor, and detailed movement methods are identified by analyzing the data from the Orientation sensor. In this study, two sensors of the smart-phone were used to implement the user movement status identification algorithm and to perform tests. The reference values of the speed and orientation required for the identification of the movement type were defined based on the experimental data. The results of this study showed that the movement type of a smart-phone user can be identified using the user movement state identification algorithm.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.4
• /
• pp.365-371
• /
• 2003

Digital high resolution cameras are widely available, and are increasingly use in digital close-range photogrammetry. And photogrammetry instruments are developing rapidly and the precision is improving continuously. The building of 3D terrains of high precision are possible and the calculation of the areas or the earthwork volumes have high precision due to the development of the techlique of the spatial information system using computer. Using the digital camera which has capacity of keeping numerical value by itself and easy carrying, we analyze the positioning error according to various change of photographing condition. Also we try to find a effective method of acquiring basis data for 3D monitoring of high-accuracy in pixel degree through digital close-range photogrammetry with bundle adjustment for local terrain model generation and 3D embodiment of tumulus. In the study is about to efficient analysis of digital information data fer conservation of cultural properties.

• Tuberculosis and Respiratory Diseases
• /
• v.69 no.2
• /
• pp.75-80
• /
• 2010

The year of 2009~2010 brought a number of concepts and new ideas were evaluated with promising results. However, some studies that challenged many beliefs. In acute respiratory distress syndrome (ARDS), recent clinical studies took into consideration of pathophysiologic changes of respiratory system compliance. Meta-analysis of positive end-expiratory pressure trials showed survival benefit of high positive end-expiratory pressure in ARDS. Until now, prone positioning did not show survival benefit in patients with ARDS. Extracorporeal membrane oxygenation (ECMO) based management improved survival in patients with severe ARDS. ECMO can be a management option in severe ARDS. Sedation is a standard practice in critically ill patients needing mechanical ventilation. However, Danish group reported less sedation of critically ill patients receiving mechanical ventilation was associated with an increase in days without ventilation. Although this single center study has some limitations, the overall results are promising. Use of maximal sterile barrier precautions (mask, sterile gown, sterile gloves, and large sterile drapes) with chlorhexidine-impregnated dressing reduced central venous catheter related infection. Selective oropharyngeal decontamination (application of topical antibiotics in the oropharynx) reduced the mortality rate of an intensive care unit (ICU) population. Normoglycemia in Intensive Care Evaluation and Survival Using Glucose Algorithm Regulation (NICE-SUGAR) trial reported intensive glucose control increased mortality among adults in the ICU. Some of the results of above papers are promising. However, some ideas may need for more frequent individual assessment and increase the workload of ICU staffs. Before implementation of new practice in ICU, we should take into consideration of individual hospital situation including human and material resources.

• Journal of Communications and Networks
• /
• v.18 no.1
• /
• pp.65-74
• /
• 2016

Ship ad-hoc network (SANET) extends the coverage of the maritime communication among ships with the reduced cost. To fulfill the growing demands of real-time services, the SANET requires an efficient clock time synchronization algorithm which has not been carefully investigated under the ad-hoc maritime environment. This is mainly because the conventional algorithms only suggest to decrease the beacon collision probability that diminishes the clock drift among the units. However, the SANET is a very large-scale network in terms of geographic scope, e.g., with 100 km coverage. The key factor to affect the synchronization performance is the signal propagation delay, which has not being carefully considered in the existing algorithms. Therefore, it requires a robust multi-hop synchronization algorithm to support the communication among hundreds of the ships under the maritime environment. The proposed algorithm has to face and overcome several challenges, i.e., physical clock, e.g., coordinated universal time (UTC)/global positioning system (GPS) unavailable due to the atrocious weather, network link stability, and large propagation delay in the SANET. In this paper, we propose a logical clock synchronization algorithm with multi-hop function for the SANET, namely multi-hop clock synchronization for SANET (MCSS). It works in an ad-hoc manner in case of no UTC/GPS being available, and the multi-hop function makes sure the link stability of the network. For the proposed MCSS, the synchronization time reference nodes (STRNs) are efficiently selected by considering the propagation delay, and the beacon collision can be decreased by the combination of adaptive timing synchronization procedure (ATSP) with the proposed STRN selection procedure. Based on the simulation results, we finalize the multi-hop frame structure of the SANET by considering the clock synchronization, where the physical layer parameters are contrived to meet the requirements of target applications.