• Journal of Electrical Engineering and Technology
• /
• v.13 no.2
• /
• pp.620-630
• /
• 2018

In this paper, a positioning method of distributed power system is proposed to minimize the average voltage variation of a DC microgrid through voltage sensitivity analysis. The voltage sensitivity under a droop control depends on the position of the distributed power system. In order to acquire a precise voltage sensitivity under a droop control, we analyzed the power flow by introducing a droop bus with the considerations of the droop characteristics. The results of the positioning method are verified through PSCAD/EMTDC simulation.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.35-42
• /
• 2021

The position accuracy of the stand-alone Regional Navigation Satellite System (RNSS) users is more than tens of meters because of various error sources in satellite navigation signals. This paper focuses on wide-area differential (WAD) positioning technique, which is already applied in Global Navigation Satellite System (GNSS), in order to improve the position accuracy of RNSS users. According to the simulation results in the very narrow ground network in regional area, the horizontal position error of stand-alone RNSS is about RMS 11.6 m, and that of RNSS with WAD technique, named the WAD-RNSS, is about RMS 2.5 m. The accuracy performance has improved by about 78%.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.129-132
• /
• 1996

There is a tendency nowadays to produce increasingly miniaturized electronic equipment which incorporate parts that have to be precisely positioned, like lenses, heads and CCD's in scanners, printers, copiers, VCR's, optical fiber modules, etc. In contrast to the production process of precision parts, which is currently being carried out automatically, the assemblage process is still being performed by specially skilled technicians. The assemblage process comprises normally the following steps: firstly, the parts are roughly positioned and partially fixed, secondly, the parts are manually nudged towards the target position and finally glued, screwed or welded. This paper presents a system that uses six piezo Impact Drive Mechanisms for accurate micro positioning within three degrees of freedom (lateral and longitudinal translation and rotation). The system is designed to positioning a printed circuit board with an accuracy better than 3 .mu.m (for translations), 5 mrad (for rotation).

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.2
• /
• pp.52-59
• /
• 2001

In this paper, we have proposed a capability of applying Global Positioning System(GPS) to cannon laying. High precision GPS positioning can be used for measuring precise positions and angles. Therefore, we have tested on applying GPS positioning technique to measurement of positions and angles, which related to cannon laying. First of all, we have determined a GPS reference position using various positioning methods. Then we have carried out several tests that are process of taking corner angles between neighboring two vectors. Each vector can be calculated by post/real time positioning of two GPS antennas placed on the both ends of the howitzer. The Comer Angles from Post processing(CAP) are compared with the other Corner Angles from Real time positioning(CAR). As the results, we have an agreement between CAP and CAR within 0.25 mil average, 0.29 mil standard deviation. Finally, we have discussed about the capabilities and problems in artillery arrangement using GPS.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.221-225
• /
• 2001

Recently, high accuracy and high precision are required in various industrial fields that are composed of semiconductor manufacturing apparatus and ultra precision positioning apparatus and information system and so on. The positioning technology is a very important one among them. This technology has been rapidly developed, its field needs for positioning accuracy to high as submicron. It is expected that accuracy with 10 nm in precision working and accuracy with 1 nm in ultra precision working are reached at the beginning of 2000s. Recently, to accomplish this positioning technology, many researches are concerned about it and make efforts it. This paper contain design technology of ultra precision 2-axis(X-Y Delta) stage for materialize to positioning accuracy with submicron, where, Delta stage is design as optimum against load and disturbance. And computer simulation is performed for stability and dynamic characteristic of Delta stage.

• Journal of information and communication convergence engineering
• /
• v.8 no.5
• /
• pp.602-607
• /
• 2010

Recently, one has realized that the threedimensional positioning technique used in GPS can be effectively applied to the modern two-dimensional positioning. Such a technique might has applied to the twodimensional positioning in fields of the mobile communication, eLORAN and the GPS jamming/ electronic warfare system. In the paper, we have studied on algorithms for two-dimensional positioning based on GPS Pseudorange Technique. The main works and results are summarized below. First, the linearized state equation was mathematically derived based on GPS pseudorange technique. Second, the geometry model with respect to triangles formed using unit-vectors were proposed for investigation of land-based radio positioning. Finally, the corresponding mathematical formulations for DOP values and covariance matrix were designed for two-dimensional positioning.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.260-265
• /
• 2003

Recently there are operating the Floating Vessel with the positioning control unit in ocean. This technology is not open to industrial society as exclusive one. In order to improve technical competition for its domestic product. It is required to develope the relevant product like above subject. This system consist of DGPS System, Unique Analysis, System Network, and Mooring System and so on. Accordingly Model/Field test were carried out to verify its Function / Performance for application of practical product. In this development, we have prepared the successful result to operate the speedy / accurate / stable unit as shown on this subject 'Development of Positioning Control System for Ship and Offshore using the DGPS'. And also it is expected to install this product for ship and offshore unit.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.11
• /
• pp.1139-1145
• /
• 2008

A robust position sensing system is proposed in this paper for a ubiquitous mobile robot which moves indoors as well as outdoors. The Differential GPS (DGPS) which has a position estimation error of less than 5 m is a general solution when the mobile robot is moving outdoor, while an active beacon system (ABS) with embedded ultrasonic sensors is reliable as an indoor positioning system. The switching from the outdoor to indoor or vice versa causes unstable measurements on account of the reference coordinates and algorithm changes. To minimize the switching time in the position estimation and to stabilize the measurement, a robust position sensing system is proposed. In the system, to minimize the switching delay, the door positions are stored and updated in a database. Using the database, the approaching status of the mobile robot from indoor to outdoor or vice versa has been checked and the switching conditions are prepared before the mobile robot actually moves out or moves into the door. The reliability and accuracy of the robust positioning system based on DGPS and ABS are verified and demonstrated through the real experiments using a mobile robot prepared for this research.

• Spatial Information Research
• /
• v.13 no.3 s.34
• /
• pp.283-296
• /
• 2005

Nowadays, Global Navigation Satellite System(GNSS) which is the new concept of positioning system has been developed because of satisfaction human's intelligent desire and rapid science development. GNSS which is represented by GPS provides 3-Dimension positioning information not expensively in whenever, wherever. The industry of positioning information has extending civil market widely as well as military market. So GNSS is running the role of society infra structure including car and airborne navigation, civil engineering, GIS resource, telematics and LBS, and so on. As USA removes the SA(Selective Availability), GPS has monopolizing the market and other countries have been depended on GPS, absolutely. In this paper, the author developed the software for analysis of influence using next generation, Galileo system. The local analysis was performed according to positioning mode. And GPS/Galileo combined system can implement positioning in the worst mask environment like urban cannon.

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.9-14
• /
• 2014

Recently, precision guided munition systems and missile defense systems based on GPS have been taking a key role in modern warfare. In warfare however, unexpected interferences cause by large/small scale fading, radio frequency interferences, etc. These interferences result in a severe GPS positioning error, which could occur late supports and friendly fires. To solve the problems, this paper proposes an interference mitigation positioning method by adopting a wavelet denoising filter algorithm. The algorithm is applied to a GPS/QZSS/Wi-Fi combined positioning system which was performed by this laboratory. Experimental results of this paper are based on a real field test data of a GPS/QZSS/Wi-Fi combined positioning system and a simulation data of a wavelet denoising filter algorithm. At the end, the simulation result demonstrates its superiority by showing a 21.6% improved result in comparison to a conventional GPS system.