• 한국치위생학회지
• /
• 제8권2호
• /
• pp.53-66
• /
• 2008

There was to purpose of this study improves analyzing cause that prosthesis brings bite engaging that is inaccurate in patient's mouth, when supposed that all conducts that do in operatory and dental laboratory are perfect. Impression did check bite by alginate impression material and polymerization style silicon impression material that use usually in presence at a sickbed Irreversibility, hydrocolloid, alginate impression material washed in flowing water and poured anhydrite after wait about 8 minutes so that region that charge interest after impression check bite may become undoing. And hydrophile property addition polymerization style impression material poured anhydrite after blow 30 considering impression material dwell time and H2 gas occurrence time (5~15 minute) after have washed in flowing water. I got each 7 models, result that manufactures total 28 and measures by third dimension measuring instrument (Meteo, Korea) following sequence curing in tray holder and floor 1, By Alginate impression when is hardened in tray holder and when is hardened in the floor after do check bite, SPH 4, SPH5 all as there is synonymy appeared(P<0.05). By in case do not use average 0.1741 in case use tray holder in 0.0447 SPH5s in case do not use average 0.2838 pastas in case use tray holder in SPH4 0.0309, When did not use both SPH4 and SPH5 tray holder, when used tray holder, 1 appeared more greatly. 2. By amity sex addition polymerization style silicon impression when is hardened in tray holder after do check bite and when is hardened in the floor SPH 4, a11 of the SPH5s very big synonymy be(P>0.05). And in case use tray holder in 0.000657 pasta SPH5s in case do not use average 0.000129 pastas in case use tray holder in SPH4 average 0.000114 pastas, by in case do not use 0.000757, I appeared more greatly when used tray when did not use both SPH4 and SPH5 tray holder, but 1 appeared is not level to keep in mind(Table 8~9). 3 SPH4 was looked very big mindfulness in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon without using tray holder(P< 0.001). I use tray holder and SPH4 did not appear synonymy in model that manufacture doing impression check bite by Alginate and model that do impression check bite by amity sex accessory penalty silicon(P>0.05). Study finding of above when see synthesis Alginate certainly tray holder use must and I could know that hardening method does not exert big influence on volume stability if remove impression sieve of excess because amity sex accessory penalty silicon passes over tray, Also, Alginate impression material previewed can get heading a conspiracy style that volume stability of accessory penalty silicon impression material degree is if use tray holder.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.651-654
• /
• 2002

Study of electric vehicle is popular with automobile company. However, battery cooling problem has delayed development of electric vehicle. Lifetime of electric vehicle's battery depends on the cooling effect for the battery tray. One model was simulated by 3-D, steady state, incompressible, k-e turbulent model simulation. It is found that flow inlet, outlet and inlet position are very important design parameters.

• 복식
• /
• 제6권
• /
• pp.105-119
• /
• 1982

This thesis is mainly about the changes of Garment's collar(옷깃) and outer collar (옷섶) which indicate the identification of dress history. Through the observations of some reports about important folk materials and genuine objects, the author has investigated and rearranged them focusing on Yi-Dynasty. (1400-1900) For the shape of the outer lapels(겉깃) of Korean Jacket(저고리) were used together Squar-Tray-Collar(목판깃), Sharped-Collar(칼깃), and Dang ko-Collar(당코깃) and coming to the end of inner lapels(안깃) formed squar-tray-collar. Squar-tray-collar and sharped-collar were mainly used together for the shape of the outer lapels of Korean overcoat(포). Dang ko-collar was seen only in two overcoat. Coming to the 18th centry, the outer lapels became round-edged like those of jackets, while the inner lapels formed squar-tray-collar. In the process of positional changes of the collar and outer collar of Korean jacket and overcoat, the outer lapels positioned outside the outer collar, or a part of width of collar's positioned upon the outer collar, or the whole outer lapels positioned inside the outer collar. And through these changes the current position of the outer lapels became settled in the end of the 19th centry. But the inner lapels did not undergo many changes compared with the outer ones, and their position was mainly outside the outer collar like those of current lapels. And the garment's collar and outer collar of jacket and overcoat became small while the width and length of breast-tie(고름) became large.

• Current Research on Agriculture and Life Sciences
• /
• 제20권
• /
• pp.19-24
• /
• 2002

건전묘 생산을 위한 육묘 콘테이너의 선반 간격과 상자간의 배치간격을 달리하여 육묘하면서 이들이 모 생육에 미치는 영향을 조사하여 얻어진 결과를 요약하면 다음과 같다. 콘테이너의 선반 간격이 17 cm 에서 23 cm로 넓어짐에 따라 묘초장이 증가하였고 그 증가폭은 6월 10일 파종에서보다 5월10일 파종에서, 육묘일수가 길어질수록 큰 편이었다. 콘테이너의 선반간격뿐만 아니라 상자간의 배치간격도 모의 생장에 미치는 영향이 매우 컸으며 상자의 배치간격이 넓을수록 초장이 짧아지고 묘충실도는 증가하는 경향이었다. 육묘 콘테이너에 치상된 육묘상자의 위치에 따른 조도는 하단에서 상단으로 올라갈수록 높아졌고, 묘초장은 상단에서 하단으로 갈수록 큰 편이었다. 육묘콘테이너의 선반간격을 20 cm로 하고 육묘상자와 상자사이를 3 cm 정도 띄웠을 때 모의 황화현상은 크게 감소하였다.

• Radiation Oncology Journal
• /
• 제7권2호
• /
• pp.293-297
• /
• 1989

Electron contamination due to the interaction between radiation beam and material was analyzed for the factors such as source-skin distance (SSD), field size, tray characteristics and position of filter, which can affect the surface dose in Cobalt teletherapy. Surface dose in open beam was more influenced by SSD with increasing field size. Relative surface charge (RSC) increased with the use of tray (solid, circular hole, slotted), compared with open beam, which is thought to be due to increased electron contamination of the tray. To reduce the surface dose, 0.4mm thick Lipowitz metal filter was used. Compared with open beam, RSC decreased by 8.8%, 11.3%, 13.3%, 16.6%, 19.3% and 21.7% for the field size of $5{\times}5$, $10{\times}10$, $15{\times}15$, $20{\times}20$, $25{\times}25$ and $30{\times}30cm^2$, respectively. On the contrary, use of Lipowitz metal filter increased RSC at 60cm or less SSD. Surface dose was effectively reduced with Lpowitz metal filter placed right below solid tray in Cobalt teletherapy.

• Nuclear Engineering and Technology
• /
• 제55권4호
• /
• pp.1571-1584
• /
• 2023

In this study, a numerical analysis was performed as part of an international joint research project to reproduce a real cable tray fire that occurred in the heater bay area of the turbine building of a nuclear power plant. A sensitivity analysis was performed on various input parameters to derive results consistent with the sprinkler activation time obtained from the fire event analysis. For all sensitive parameters, the normalized sprinkler activation time correlated well with the power function of the normalized sprinkler height. A correlation equation was developed to identify the sprinkler activation time at any location when determining the slope or fire growth rate under the conditions assuming a linear or t-squared heat release rate (HRR) time curve. Various cable fire growth assumptions were used to determine which assumption was better to provide the prediction coincident with the information given from the fire event analysis in terms of the sprinkler activation time and total energy generated from cables damaged by fire. In the comprehensive analysis of all the sensitive parameters, the standard deviation of the input parameters increased as the sprinkler height decreased. Within the range of the sensitivity parameter values given in this study, when considering all sprinkler heights, the standard deviation of the cable model change was the largest and that of the overhang position change was the smallest.

• Journal of Biosystems Engineering
• /
• 제37권3호
• /
• pp.201-208
• /
• 2012

Purpose: This study was conducted to develop a vegetable transplanting robot which transplants seedlings from a nursery tray to a plant pot using its four fingers. Method: The robot consists of the transplanting part, nursery tray moving part, plant pot moving part, main frame and controller. Two moving parts are controlled by the photo sensor and servo motor. The transplanting part was composed with two components; transporting device using E-MY2H(SMC Corp., Japan) for controlling finger position accurately and finger for transplanting the seedling. Results: Head lettuce using the transplanting robot was transplanted in 21 days after sowing based upon the seed shape measurement and removing examination. The optimal finger shape was thin pin type because it caused minimum damage to the roots of seedlings. Conclusions: The four inclined pin type was applied to remove the seedlings from the nursery tray. In addition, the transplanting capacity of the developed robot was 2800 pots per hour and the rate of success was 99% and above.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1726-1732
• /
• 2008

사출성형은 다양한 형태의 제품을 대량 생산할 수 있는 플라스틱 성형 공법중의 하나이다. 플라스틱 제품을 만들기 위해서는 고상의 재료를 액상으로 녹인 후 다시 고상으로 굳히는 과정을 거치는 데, 이 과정 중에 많은 문제점들이 발생을 하게 된다. 과거에는 이러한 문제를 해결하기 위해서 성형 후 금형 설계 변경 등의 시행착오적 방법을 사용하였으나, 성형과정에 대한 사출성형 CAE(Computer Aided Engineering)를 적용함으로써, 사전에 문제점을 파악하는 기술이 도입되었다. 플라스틱 제품의 큰 문제점 중 하나가 치수안정성이다. 특히 박막사출성형품은 게이트의 위치, 냉각채널과 온도에 따라서 변형량이 크게 달라진다. 본 연구에서는 현재 Stackmold방식으로 4개의 Cavity에 4개의 Hot-Runner가 설치된 금형을 통해 생산중인 DVD Tray 박막사출제품의 생산 원가 절감을 위해서 Cavity하나에 한 개의 Hot-Runner를 설계하기 위해서 CAE 해석을 통해 게이트의 위치, 냉각채널과 온도에 따라 비교하여 해석해 최적의 제품 설계를 하였다. CAE 해석에는 상업화된 CAE 프로그램인 Moldflow를 사용하였고, 수지는 PC+ABS를 사용하였다.

• 방사선산업학회지
• /
• 제7권2_3호
• /
• pp.115-119
• /
• 2013

The density profile measurement technology by gamma transmission has been widely used to diagnose processes in the field of refinery and petrochemical industry. This technology can reveal a clue and position of abnormal phenomenon of industrial processes during their operation. In this paper, the feasibility of the gamma transmission technology for detecting changes in the amount of fluid in a distillation column was evaluated by using Monte Carlo simulations. The simulations assumed that $^{60}Co$ (1.17, 1.33 MeV) sources and NaI (Tl) detectors (${\Phi}5{\times}5cm$) are located in opposite sides of a column and it concurrently moves in vertical direction. To determine the dependency of a spatial resolution on aperture size of a collimator, the simulation model for a tray in a column were simulated with the aperture sizes of 1 and 2 cm. The thickness of the high density area including a tray and fluid was 7.6 cm in the simulation. The spatial resolution of the tray was 8.2 and 8.5 cm, respectively. As a result, it was revealed that the conventional density profile measurement technique is not able to show the deviation of liquid level on a tray in a column.

• 농업생명과학연구
• /
• 제45권5호
• /
• pp.105-113
• /
• 2011

본 연구는 식물공장의 각 공정 간을 연결하는 육묘라인을 폐쇄형 레일로 설정하고, 그 레일 상에서 구름바퀴 이동을 하는 육묘베드가 있고, 이 육묘 베드위의 일정위치에 육묘트레이를 자동으로 올려놓는 자동적재장치를 개발하기 위하여 수행되었다. 이 장치의 개발을 위한 기초시험으로 바닥재 위에 육묘트레이를 올려놓고 밀기이송을 하는 시험을 실시하고, 밀기이송력의 변화를 측정 분석하여 최적의 육묘트레이 자동적재장치를 개발하였다. 바닥 위에 파종완료한 트레이를 올려놓고 밀기 이송을 할 때 최대 이송력은 이송속도 30 cm/s에서 트레이 3개를 이송할 때로 초기이송시점에서 최대 피크이송력과 초기 과도상태 이후 최대 정상상태 이송력이 각각 바닥재료가 고무판에서는 32.8 N, 29.4 N, 목재판 29.7 N, 22.5 N, 아크릴판 26.9 N, 19.6 N, 철판 27.6 N, 19.1 N으로 나타났다. 이 이송력의 변화는 모노레일 컨베이어가 트레이와 충돌 직후 최대로 발생했으며, 이후 점차 줄어들어 안정적으로 변화되는 것으로 나타났다. 트레이를 2개 이상 맞대어 밀기이송 시 트레이 외각 받침날의 겹침현상이 일어났다. 최종적으로 개발한 육묘트레이 적재이송장치는 100회의 작동시험 결과 작동에러는 없었으며, 최대 육묘트레이 적재이송 작업속도는 2초/매, 트레이 이송위치 최대오차는 0.5 cm로 나타났다.