• Wind and Structures
• /
• 제22권6호
• /
• pp.663-684
• /
• 2016

Conical vortices generated at the corner regions of large-span flat roofs have been investigated by using the Particle Image Velocimetry (PIV) technique. Mean and instantaneous vector fields for velocity, vorticity, and streamlines were measured at three visual planes and for two different flow angles of $15^{\circ}$. The results indicated that conical vortices occur when the wind is not perpendicular to the front edge. The location of the leading edge corresponding to the negative peak vorticity and maximum turbulent kinetic energy was found at the center of the conical vortex. The wind pressure reaches the maximum near the leading edge roof corner, and a triangle of severe suctions zone appears downstream. The mean pressure in uniform flow is greater than that under turbulent flow condition, while a significant increase in the fluctuating wind pressure occurs in turbulent streams. From its emergence to stability, the shape of the vortex cross-section is nearly elliptical, with increasing area. The angle that forms between the vortex axis and the leading edge is much smaller in turbulent streams. The detailed flow structures and characteristics obtained through FLUENT simulation are in agreement with the experimental results. The three dimensional (3-D) structure of the conical vortices is clearly observed from the comprehensive arrangement of several visual planes, and the inner link was established between the vortex evolution process, vortex core position and pressure distribution.

• 센서학회지
• /
• 제29권3호
• /
• pp.194-200
• /
• 2020

Human detection is an important aspect in many video-based sensing and monitoring systems. Studies have been actively conducted for the automatic detection of humans in camera images, and various methods have been proposed. However, there are still problems in terms of performance and computational cost. In this paper, we describe a method for efficient human detection in the field of view of a camera, which may be static or moving, through multiple processing steps. A detection line is designated at the position where a human appears first in a sensing area, and only the one-dimensional gray pixel values of the line are monitored. If any noticeable change occurs in the detection line, corner detection and optical flow computation are performed in the vicinity of the detection line to confirm the change. When significant changes are observed in the corner numbers and optical flow vectors, the final determination of human presence in the monitoring area is performed using the Histograms of Oriented Gradients method and a Support Vector Machine. The proposed method requires processing only specific small areas of two consecutive gray images. Furthermore, this method enables operation not only in a static condition with a fixed camera, but also in a dynamic condition such as an operation using a camera attached to a moving vehicle.

• 한국정보기술학회 영문논문지
• /
• 제10권2호
• /
• pp.153-166
• /
• 2020

DDI(Display Driver IC) are used to drive numerous pixels that make up display. For stable driving of DDI, it is necessary to attach a protective film to shield electromagnetic waves. When the protective film is attached, defects often occur if the film is inclined or the center point is not aligned. In order to minimize such defects, an algorithm for correcting the center point and the inclined angle using camera image information is required. This technology detects the corner coordinates of the protective film by image processing in order to correct the positional defects where the protective film is attached. Corner point coordinates are detected using an algorithm, and center point position finds and correction values are calculated using the detected coordinates. LUT (Lookup Table) is used to quickly find out whether the angle is inclined or not. These algorithms were described by Verilog HDL. The method using the existing software requires a memory to store the entire image after processing one image. Since the method proposed in this paper is a method of scanning by adding a line buffer in one scan, it is possible to scan even if only a part of the image is saved after processing one image. Compared to those written in software language, the execution time is shortened, the speed is very fast, and the error is relatively small.

• 전자공학회논문지
• /
• 제50권6호
• /
• pp.267-275
• /
• 2013

GPS가 가지는 특징과 비선형, 비가우시안의 시스템에서도 강인한 특성을 지닌 파티클 필터(PF, Particle Filter)를 이용하여 위치 추정 성능을 향상시키는 방법에 대해 제안한다. 그리고 제안한 알고리즘으로 보정한 GPS 데이터와 관성센서를 저가형 시스템에 적합한 약결합 방식을 이용하여 결합하였으며 정확도 향상을 위해 자세에 관한 칼만필터를 추가시켜 구현하였다. 구현된 시스템의 성능확인을 위해 NovAtel사의 고정밀 GPS와 비교 분석하였다.

• 수산해양기술연구
• /
• 제19권1호
• /
• pp.25-32
• /
• 1983

레이다에서 전파반사표식으로 사용하고 있는 코오너리프렉터를 수중 초음파반사표지로 응용하기 위하여, 코오너리프렉터의 수중초음파반사특성을 이론적으로 고찰하고, 28,50,75KHz의 주파수에 대하여 주파수가 높을수록 높았고, 반사지향성은 직경이 증가함에 따라 예리하였다. 2. 직경이 150mm이고, 코오너각이 15$^{\circ}$, 30$^{\circ}$, 45$^{\circ}$, 60$^{\circ}$, 90$^{\circ}$인 코오너리프렉터의 최대반사강도는 각각 -25.0dB, -17.2dB, -15.2dB, -13.4dB, -11.0dB로서, 코오너각이 증가함에 따라 점차 증가하는 경향을 나타내었으나, 그 주엽 수는 코오너각이 증가함에 따라 점차 감소하였다. 3. 직경이 80mm이고, 코오너각이 90$^{\circ}$인 코오너리프렉터를 2,3,4,5,6,7개씩 음속축을 중심으로 간격없이 평면배열한 경우에 있어서, 반사강도는 각각 -18.2dB, -16.5dB, -15.4dB, -14.3dB, -13.4dB, -12.9dB로서, 이론치와 거의 일치하였으며, 코오너리프렉터수의 평방근에 비례하였다. 4. 직경이 80mm인 코오너리프렉터의 방향각(0,$\theta$sub(a))이 0$^{\circ}$, 2.5$^{\circ}$, 5$^{\circ}$, 7.5$^{\circ}$, $10^{\circ}$, 12.5$^{\circ}$인 경우, 반사강도는 각각 -21.2dB, -21.9dB, -23.4dB, -26.0dB, -30.0dB, -36.8dB로서, 방향성이 증가함에 따라 반사강도는 급격히 감소하는 경향을 나타내었다.

• 복식문화연구
• /
• 제12권6호
• /
• pp.933-944
• /
• 2004

This study was aimed to provide the fundamental and various measurement data of the head and face for male children. Two hundred forty one male children, aged nine to twelve years, participated for this study. The 31 regions on the head and face of the subjects were directly measured by the expert experimenters. Through factor analysis, the six factors were extracted upon factor scores and those factors comprised $67.47\%$ for the total variances. The first factor was described the general height elements for the mouth and the environs of the mouth. The second factor was described the general height around the nose, forehead and eyes. The third factor was described the height of the ear environs. The forth factor contained the length around the sinciput to the occiput, the head thick and the head circumstance. The fifth factor was described the general width of the outer head and the corner of the eyes. The last factor contained the depth of the mouth and nose. Four clusters as their head and face shape were categorized using six factor scores by cluster analysis. Type 1 was characterized by the shortest head and face width, surface length and girth, and the shorter length of head, but the highest position of chin, philtrum, upper lip. Type 2 was characterized by the shortest head and face length and thickness, and the lowest position of the forehead, eye, nose, mouth, ear environs, but that had wider width of head and face. Type 3 was characterized by the longest and the widest head and face type, and the highest position of the mouth. Type 4 was characterized by longer length of head and face, and the widest head girth and largest head thickness, and the highest position of the forehead, eye, nose environs. And this type had the widest width of nose and mouth, and the longest head surface length.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.50-50
• /
• 2000

In this paper, a new measuring system is :proposed which can measure the fine 6-DOF displacement of rigid bodies. Its measurement principle is based on detection of laser beam reflected from a specially fabricated mirror that looks like a triangular pyramid having an equilateral cross-sectional shape. The mirror has three lateral reflective surfaces inclined 45$^{\circ}$ to its bottom surface. We call this mirror 3-facet mirror. The 3-facet mirror is mounted on the object whose 6-DOF displacement is to be measured. The measurement is operated by a laser-based optical system composed of a 3-facet mirror, a laser source, three position-sensitive detectors(PSD). In the sensor system, three PSDs are located at three corner points of a triangular formation, which is an equilateral triangular formation tying parallel to the reference plane. The sensitive areas of three PSDs are oriented toward the center point of the triangular formation. The object whose 6-DOF displacement is to be measured is situated at the center with the 3-facet mirror on its top surface. A laser beam is emitted from the laser source located at the upright position and vertically incident on the top of the 3-fatcet mirror. Since each reflective facet faces toward each PSD, the laser beam is reflected at the 3-facet mirror and splits into three sub-beams, each of which is reflected from the three facets and finally arrives at three PSDs, respectively. Since each PSD is a 2-dimensional sensor, we can acquire the information on the 6-DOF displacement of the 3-facet mirror. From this principle, we can get 6-DOF displacement of any object simply by mounting the 3-facet mirror on the object. In this paper, we model the relationship between the 6-DOF displacement of the object and the outputs of three PSDs. And, a series of simulations are performed to demonstrate the effectiveness of the proposed method. The simulation results show that the proposed sensing system can be an effective means of obtaining 3-dimensional position and orientation of arbitrary objects.

• 디자인학연구
• /
• 제14권4호
• /
• pp.179-188
• /
• 2001

전시공간은 인간 그리고 전시물에 대해 그 외형과 더불어 내재된 가치의 상호작용까지 고려해야 하므로 건축 및 실내건축의 설계, 전시 프로그램의 기획 조정, 전시공간에의 구체화, 운영 및 관리 등의 여러 가지 작업들이 조화를 이루어 형성되는 결과물이다. 그러므로 박람회의 전시공간은 축적된 가치의 산물들을 보유하는 장소로서의 기능 뿐 아니라 관람자와의 커뮤니케이션을 이룰 수 있는 기능적 역할을 수행하여야 한다. 그러므로 무역박람회 전시의 목적을 달성하기 위해서는 전시물의 특성, 전시내용, 전시 프로그램뿐만 아니라 전시장의 위치와 형태에 따른 효과적인 커뮤니케이tus 계획을 수립해야 한다. 무역박람회 전시매장의 전시공간은 그 위치에 따라 벽형, 모퉁이형, 머리형, 섬형, 양 입구형 5가지로 분류될 수 있으며, 이러한 위치에 따른 커뮤니케이션 계획은 수동적 커뮤니케이션 구역, 능동적 커뮤니케이션 구역, 집약적 커뮤니케이션 구역, 기능수행 구역으로 그 기능을 구분하여 계획해야 한다. 이와 같은 무역박람회 전시공간의 전시형태와 위치에 관련한 커뮤니케이션 계획을 통하여 성공적인 전시를 위한 내용과 방법을 모색할 수 있으며 무역박람회 전시의 목적을 달성할 수 있을 것이다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.143-149
• /
• 2008

A numerical study was performed for a vane of a compressor with a high-turning angle and meridional divergence. At first, the effect of the suction position was discussed. Then, the optimal suction position was applied to the cascades with the aspect ratio of 2.53 and 0.3, respectively, to get the knowledge of the effect of the endwall boundary layer removal on the secondary flow along the blade height. At last, using the critical principles of the three-dimensional separation, the topological structures of the flow patterns of the body surfaces and the separation configurations were discussed in detail. The results show that the largest reduction of the total loss can be achieved when the suction slot is near the suction side. The topological structure as well as the separation configuration varies due to boundary layer removal, which restrains the flow separation at the corner and delays or depresses the separation on the suction surface. Compared with the original cascade, the cascade with the endwall boundary layer removal has a higher blade loading along the most span. Furthermore the flow loss decreases and distributes uniformly along the span.

• 한국기계가공학회지
• /
• 제12권1호
• /
• pp.52-62
• /
• 2013

In order to obtain the relation between the cutting force and the process parameters in the chamfering process for the gear of a gear shaft, analysis of the process was performed with a simplified model instead of considering the whole actual 3-dimensional cutting situation produced between cutting tool and gear. The model divided the actual situation into the accumulation of hundreds of 2-dimensional layers with a small thickness in the direction of the height of gear and derived cutting force at a cutting position by accumulating each cutting force calculated in a layer. With proposed method to analyze the cutting forces in the chamfering process, it was revealed that the cutting position and size were exactly searched to calculate the cutting force in each layer. The total cutting force was the highest in the corner where the cutter encountered the gear first during the relative motion between them. The cutting forces were changed in proportion to the cutting parameters such as feed rate and trajectory.