• 제어로봇시스템학회논문지
• /
• 제22권12호
• /
• pp.1034-1039
• /
• 2016

This paper presents the implementation and control of a small-scaled excavator system. The commercial miniature of an excavator system has been modified and its control hardware is embedded to access the feedback control. Encoder sensors are attached to the joint and a force sensor is mounted on the end-effector so that feedback position control is accessible as well as force control. The dynamic model of the excavator system is derived as a four linkage robot arm and its control performances are simulated. Experimental studies of contact force control tasks are conducted to test the control algorithm for the excavator system.

• Journal of Power Electronics
• /
• 제9권3호
• /
• pp.499-506
• /
• 2009

In this paper, the initial pole-position estimation of a surface (non-salient) permanent magnet synchronous motor is mathematically analyzed and surveyed on the basis of simulation analysis, and developed for accurate servo motor drive. This algorithm is well carried out under the full closed-loop position control without any pole sensors and is completely insensitive to any motor parameters. This estimation is based on the principle that the initial pole-position is simply calculated by the reverse trigonometric function using the two feedback currents in the full closed-loop position control. The proposed algorithm consists of the predefined reference position profile, the information of feedback currents, speed, and relative position, and the reverse trigonometric function for the initial-pole position estimation. Comparing with the existing researches, the mathematical analysis is introduced to get a more accurate initial pole-position of the surface permanent magnet motor under the closed-loop position control. It is found that the proposed algorithm can be easily applied in servo drive applications because it satisfies the following user's specifications; accuracy and moving distance.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.475-480
• /
• 2000

A new positioning mechanism with Parallel type actuator using piezoelectric material and with dual type actuators using voice coil motor (VCM) and piezoactuator is proposed for optical disk drive or near-field recording type drive, and high speed position and vibration control are investigated. Parallel type bimorph piezoactuator is used as a fine motion actuator with self-sensing technique, which allows a piezoelectric material to concurrently sense and actuate in a closed loop frame work, and positive position feedback control algorithm is adopted to further control residual vibration. For positioning control of VCM, PID control algorithm is adopted.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권6호
• /
• pp.932-938
• /
• 2009

As a stringing troy wire is installed by manual operation, it is necessary to scheme the automatic system for stringing troy wire. To accomplish a task of this kind, in this paper an approach to designing controllers for the hybrid Position/Tension control of a stringing troy wire is presented. Position control system is designed based on equation of dc motor and motion equation of robot, it is controlled by feedback with a detected speed dc motor. Tension control system is designed based on equation of ac servomotor for generating torque and dynamic equation of a troy wire, it is controled by feedback with a detected tension. The control parameters is determined by simulation in independence operation of each system. To suppress a mutual interference that the disturbance occur in operating of two task at same time. Dynamic hybrid control is proposed by feed forward compensator with a disturbance accelerator and a step torque at start. The operation of proposed system is simulated and experimented, results is verified the utilities.

• 제어로봇시스템학회논문지
• /
• 제9권7호
• /
• pp.515-526
• /
• 2003

Tutorial contents of kinematics and dynamics of a wheeled drive mobile robot are presented. Based on the dynamic model, simulation studies of position tracking of a mobile robot are performed. The control structure of several position control algorithms using visual feedback are proposed and their performances are compared. In order to compensate for uncertainties from unknown dynamics and ignored dynamic effects such as slip conditions, neural network based position control schemes are proposed. Experiments are conducted and the results show the performance of the vision based neural network control scheme fumed out to be the best among several proposed schemes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.28-31
• /
• 1988

This paper proposes a new linear adaptive position controller of DC servo motor. The proposed method can improve the drive performance and rapidly reject the state error caused by both parameter variations and force disturbance. The structure of this adaptive control method is based multiloop feedback control and model reference control. Simulation results are presented to verify the improved response when parameter variations and load disturbance give relatively significant effects to the servo system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권3호
• /
• pp.284-292
• /
• 1997

This paper is concerned with position control of direct drive robots. The proposed algorithm consists of the feedback controller and neural networks. Mter the completion of learning, the output of the feedback controller is nearly equal to zero, and the neural networks play an important role in the control system. Therefore, the optimum retuning of control parameters is unnecessary. In other words, the proposed algorithm does not need any knowledge of the con¬trolled system in advance. The effectiveness of the proposed algorithm is demonstrated by the experiment on the position control of a parallelogram link-type direct drive robot.

• 소음진동
• /
• 제10권6호
• /
• pp.1083-1093
• /
• 2000

이 논문은 지능구조물의 실시간 적응진동제어를 위해 유전자 알고리즘을 이용하여 Positive Position Feedback(PPF) 제어기를 조정하는 것과 관련이 있다. 유전자 알고리즘은 최적변수를 찾는데 있어 국소 최소점이 아닌 전체적인 최적점을 찾을 수 있는 능력이 있다. PPF 제어기는 다른 진동모드에 영향을 주지 않으면서 특정 진동모드의 감쇠를 증가시킬 수 있는 장점을 가지고 있는 반면에 효과적인 진동제어를 위해서는 제어하고 자하는 진동모드의 고유진동수를 정확히 알아야하는 단점이 있다. 본 연구에서는 유전자 알고리즘을 이용하여 실시간으로 PPF 제어기가 필요로 하는 변수값을 추적할 수 있는 알고리즘을 개발하여 그 타당성을 실험으로 증명하였다. 실험결과는 PPF 제어기의 실시간 조정이 성공적으로 이루어져 진동제어가 효과적으로 이루어졌음을 보여주고 있다.

• 소음진동
• /
• 제7권6호
• /
• pp.1007-1013
• /
• 1997

This paper presents active vibration control scheme of multi-mode forced vibration using piezocetamic sensors and actuators. The control scheme adopted is the Positive Position Feedback (PPF) control. Among various vibration control techniques. PPF control technique makes use of generalized displacement measurements to accomplish the vibration suppression. Two independent controllers are implemented to control the first and the second modes of the beam under external excitation. Experimental results for various damping ratios and feedback gains of the PPF controllers are compared with respect to the contorl efficiency. The results indicate that steady state vibration under wide band excitation can be controlled effectively when multiple sets of PZT sensors and actuators were used with PPF control technique.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.213-218
• /
• 2003

The equipment of industrial robot in manufacturing and assembly lines has rapidly increased. In order to achieve high productivity and flexibility, it becomes very important to develop the visual feedback control system with Off-Line Programming System(OLPS). We can save much efforts and time in adjusting robots to newly defined workcells by using OLPS. A proposed visual calibration scheme is based on position-based visual feedback. The calibration program firstly generates predicted images of objects in an assumed end-effector position. The process to generate predicted images consists of projection to screen-coordinates, visible range test and construction of simple silhouette figures. Then camera images acquired are compared with predicted ones for updating position and orientation data. Computation of error is very simple because the scheme is based on perspective projection which can be also expanded to experimental results. Computation time can be extremely reduced because the proposed method does not require the precise calculation of tree-dimensional object data and image Jacobian.