• 제어로봇시스템학회논문지
• /
• 제7권6호
• /
• pp.518-522
• /
• 2001

The main problem of the calibration of robots is to measure the position and orientation of a robot end effector. The calibration methods can be used as tool to improve the accuracy of robots without change of the arm or control architecture or robots. But such calibration methods require accurate measurements. Dynamic measurement of position and orientation provides a solution for this problem and improves dynamic accuracy by dynamic calibration of robots. This paper describes the development of the laser tracking system capable of determining the static and dynamic performance of industrial robots. The structure and systems components are presented and basic experimental results are included to demonstrated the instrument performance. The system can be applied to the remote controlled mobile robots as well s the calibration of robots.

• 전기학회논문지
• /
• 제60권10호
• /
• pp.1915-1923
• /
• 2011

For automated guidance control of a magnetically guided-all wheel steered vehicle, it is necessary to have information about position and orientation of the vehicle, and deviations from the reference path in real time. The magnet reference system considered here consists of three magnetic sensors mounted on the vehicle and magnetic markers, which are non-equidistantly buried in the road. This paper presents an observer to estimate such position and orientation at the center of gravity of the vehicle. This algorithm is based on the simple kinematic model of vehicle and uses the data of wheel velocity, steering angle, and the discrete measurements of marker positions. Since this algorithm requires the exact values of initial states, we have also proposed an algorithm of determining the initial position and orientation from the 16 successive magnet pole data, which are given by the magnetic measurement system(MMS). The proposed algorithm is capable of continuing to estimate for the case that the magnetic sensor fail to measure up to three successive magnets. It is shown through experimental data that the proposed algorithm works well within permissible error range.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 추계학술대회
• /
• pp.53-54
• /
• 2015

The maritime industry is expanding at an alarming rate and as such there is a perpetual need to improve situation awareness in the maritime environment using new and emerging technology. Tracking is one of the numerous ways of enhancing situation awareness by providing information that may be useful to the operator. The tracking system described herein comprises determining existing states of own ship, state prediction and state compensation caused by random noise. The purpose of this paper is to analyze the process of tracking and develop a tracking algorithm by using ${\alpha}-{\beta}-{\gamma}$ tracking filter under a random noise or irregular motion for use in a warship. The algorithm involves initializing the input parameters of position, velocity and course. The actual positions are then computed for each time interval. In addition, a weighted difference of the observed and predicted position at the nth observation is added to the predicted position to obtain the smoothed position. This estimation is subsequently employed to determine the predicted position at (n+1). The smoothed values, predicted values and the observed values are used to compute the twice distance root mean square (2drms) error as a measure of accuracy of the tracking module.

• 한국컴퓨터정보학회논문지
• /
• 제13권2호
• /
• pp.235-242
• /
• 2008

이동자율로봇은 작업 공간을 벗어난 작업에 대하여 높은 성능을 보일 수 있으므로 고정 베이스 구조인 매니플레이터에 비하여 다양한 작업 환경에서 유용하다. 임의의 위치에 있는 물체를 인식하기 위하여 이동자율로봇에 부착된 2자유도의 능동카메라에 의해 입력되는 영상과 능동카메라의 기구학적 관계와 직각좌표계를 이용하여 물체의 위치와 이동로봇의 위치를 구하는 방법을 제시한다. 동차행렬을 이용하여 이미지정보와 물체의 위치를 해석하므로 이동자율로봇의 최적경로를 생성한다. 최종적으로, 물체의 인식을 통하여 이동로봇을 제어할 수 있는 조인트변수의 값을 계산한다. 제안된 방법은 제작된 이동자율로봇의 시뮬레이션과 실험을 통하여 확인되어지고 논의된다.

• International Journal of Control, Automation, and Systems
• /
• 제3권1호
• /
• pp.130-136
• /
• 2005

A new optical digitizing system for determining the position of a cursor in three dimensions(3D) and an experimental device for its measurement are presented. A semi-passive system using light intensity modulation, a technology that is well known in radar ranging, is employed in order to overcome precision limitations imposed by background light. This system consists of a charge-coupled device camera placed before a rotating mirror and a light-emitting diode whose intensity is modulated. Using a Fresnel pattern for light modulation, it is verified that a substantial improvement of the signal to noise ratio is realized for the background noise and that a resolution of less than a single pixel can be achieved. This opens the doorway to the realization of high precision 3D digitized measurement. We further propose that a 3D position measurement with a monocular optical system can be realized by a numerical experiment if a linear-period modulated waveform is adopted as the light-modulating one.

• 소음진동
• /
• 제7권3호
• /
• pp.393-399
• /
• 1997

This study proposes a methodology with which the optimal damper positions of the feeding system in a CD-ROM drive are determined to removal the harmful tilting vibration modes. For this purpose, vibration characteristics of the feeding system are identified by a theoretical modeling as well as vibration experiments. We perform the modal testings using the impact hammer and shaker; furthermore, we establish a vibration model due to the rigid-body motion. The analysis and experiments show that the feeding system has three rigid-body vibration modes in the low-frequency region and two of them come from the tilting modes. We show that the tilting modes can be removed by determining the damper positions.

• 대한기계학회논문집A
• /
• 제34권2호
• /
• pp.183-189
• /
• 2010

위치인식시스템은 이동로봇이 실내에서 주행하는데 가장 중요한 기술의 하나인데 본 논문에서 연구된 시스템은 GPS 시스템과 유사하게 3 개이상의 위성 비이컨에서 초음파와 무선통신파를 발사하고 로봇에 부착된 리시버는 초음파와 무선통신파의 수신되는 시간차를 계산하여 각 비컨까지의 거리를 구하고 또한 이로부터 로봇의 위치를 계산한다. 일반적으로 거리정보는 초음파의 한 파장 이내의 오차를 가지게 되는데 본 논문에서는 이에 따른 위치오차를 테일러 확장과 SVD(Singular Value Decomposition)를 이용하여 구하였다. 또한 본 논문에서는 거리오차에 따른 위치오차의 정확도를 잴 수 있는 값으로 민감도를 제시하였다.

• Current Optics and Photonics
• /
• 제8권4호
• /
• pp.366-374
• /
• 2024

This paper presents an optimum method for determining the parameters to athermalize a long-wavelength infrared (LWIR) zoom camera by introducing the defocus sensitivity analysis. To effectively find parameters that significantly affect thermal defocus, we simulated athermal analysis with temperature changes for all variables. Consequently, we found that the optimum parameter to correct thermal defocus is the compensation lens, and its movements with temperature at each zoom position are obtained from the simulated athermal analysis. To verify the efficiency of our athermal approach, we performed actual athermal tests in a broad temperature range at each zoom position. The simulated athermal analysis provides the initial position of the compensation lens at the corresponding temperature and zoom position. Then the compensation lens is elaboratively moved to serve the highest live contrast ratio (LCR) for the target. This experiment shows that the compensation lens locations in the actual test are closely matched to those in the simulated athermal analysis. In addition, two outdoor tests conducted in two different environments confirm that the autofocus system suggested in this study performs well at all zoom positions. Using the proposed athermal analysis approach in this paper, we efficiently realize an athermal system over the specified temperature and zoom ranges.

• Journal of Oral Medicine and Pain
• /
• 제10권1호
• /
• pp.113-124
• /
• 1985

In order to observe the effect of mandibular orthopedic repositioning appliance (MORA) on body strength, the author measured back muscle strength with Digital Back Muscle DYNAMOMETER (TAKEI KIKI KOGYO Co., Tokyo, Japan) before MORA, 15 days after and 30 days after MORA in 12 men and then analysed them statistically. The subjects were weight-lifting athletes of Seoul Athletic High School without dysfunction of masticatory system. MORA was fabricated at 1.0-1.5rnm isotonically closed position (Myocentric Occlusion Position) from mandibular rest position (Myocentric Rest Position) using Myo-monitor (MyoTronics Research Inc., Seattle, Washington, USA) and-SVT C-II (Tokyo Shizaisha Inc., Tokyo, Japan). The results were as follows : 1. The mean of back muscle strength before MORA was 150 kg, that of 15 days after MORA was 165 kg (4.43% increase than before), and that of 30 days was 175 kg (10.76% increase than before). 2. There was a significant difference among back muscle strength before MORA, 15 days after and 30 days after MORA (P<0.01: repeated measures one-way ANOVA). 3. According to the result of determining mandibular position for MORA fabrication, mandibular rest position after relaxation with Myo-monitor was 3.2mm lower, 1.0mm posterior, and 0.5 mm left from centric occlusion. And the mean of the amount of lateral deviation was 0.7 mm.

• Journal of information and communication convergence engineering
• /
• 제14권2호
• /
• pp.106-114
• /
• 2016

Differential sensing methods are more effective in alleviating panel noise than single-line sensing, and thus have been increasingly used in the touch screen industry. However, they have a drawback: they tend to cancel out multiple touches and need touch position recovery algorithms. This paper introduces a novel algorithm of touch position recovery for differential sensing, which is a low-complexity but high-accuracy approach for determining multiple touch positions. We have implemented the proposed method in a touch screen controller system on a chip. In the simulation experiments using realistic touch screen models and a differential sensing circuit, the algorithm exhibited a high detection performance of a signal-to-noise ratio gain of up to 52.21 dB. Therefore, we can conclude that the proposed method is substantially more accurate than the previous method. Further, the proposed method incurs little or no overhead in terms of the detection speed and the chip size.