• Fire Science and Engineering
• /
• v.18 no.1
• /
• pp.24-30
• /
• 2004

In this work the dynamic heat transfer occurring in a cable penetration fire stop system built in the firewall of nuclear power plants is three-dimensionally investigated to develop a test-simulator that can be used to verify effectiveness of the sealants. Here was carried out an experiment to observe the heat transfer in the cable penetration fire stop system made of DOW CORNING products. The dynamic heat transfer occurring in the fire stop system is formulated in a parabolic partial differential equation subjected to a set of initial and boundary conditions. And it was modeled, simulated, and analyzed. The simulation results were illustrated in three-dimensional graphics and were compared with experimental data. Through the simulations, it was shown clearly that the temperature distribution was influenced very much by the number, position, and temperature of the cable streams. It also was found that the dynamic heat transfer through the cable streams was one of the most dominant factors, and the feature of heat conduction could be understood as an unsteady-state process. It is certain that these numerical results are useful for making a performance-based design for the cable penetration fire stop system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.702-708
• /
• 2016

The railway signaling system has evolved to maximize its safety and maintainability based on the experiences in the construction and operation of railway systems. The newly developed systems was established to cope with the changes in an operating environment. In the process of a transition to the new system, both the existing ATS (Automatic Train Stop) and new ATP/ATO (Automatic Train Protection/Automatic Train Operation) systems are operating simultaneously in parallel. In this situation, modifications of the conditions of the interlocking diagram and logic are necessarily required on the existing ATS systems due to the frequent improvements in signaling equipment. This paper reports the enhancement of safety and operational efficiency of the system through an improvement of the security and the interlocking conditions of the existing ATS systems. The independent display of signals for each track was ensured to avoid giving the effect of On/Off signals for the selected track on the opposite side, and the security was improved by adjusting the position and interlocking conditions. In addition, the increased traffic density of railway systems was achieved by removing the unnecessary conditions and detailed signal display, which resulted in enhanced operational efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.669-679
• /
• 2016

Architectural firms that would like to adopt the BIM are currently in an unfavorable position because of reduced orders, polarization of orders, and low price design. This study was conducted to evaluate plausible methods for supporting introduction of BIM into small sized firms. Before suggesting plans for support, we analyzed support projects and laws relating to support for small sized firms, after which we conducted a survey of small sized firms that support the project. The survey was completed by 242 architects and consisted of questions regarding the following aspects: current status and problems associated with BIM utilization, preference of certain policies for BIM introduction support, and reasonable level of support. After the survey, it was concluded that architectural firms are willing to use BIM and agree with the need for financial support for BIM program purchase and education, as well as to support BIM experts and fund low interest loans. In conclusion, it is proposed that support plans for small sized architectural firms in the areas of BIM introduction consulting, financial funding for the introductory process, provision of education and experts, order support, and promotions for accomplishment be provided.

• Journal of KIISE:Databases
• /
• v.33 no.1
• /
• pp.12-31
• /
• 2006

The n-gram inverted index has two major advantages: language-neutral and error-tolerant. Due to these advantages, it has been widely used in information retrieval or in similar sequence matching for DNA and Protein databases. Nevertheless, the n-gram inverted index also has drawbacks: the size tends to be very large, and the performance of queries tends to be bad. In this paper, we propose the two-level n-gram inverted index (simply, the n-gram/2L index) that significantly reduces the size and improves the query performance while preserving the advantages of the n-gram inverted index. The proposed index eliminates the redundancy of the position information that exists in the n-gram inverted index. The proposed index is constructed in two steps: 1) extracting subsequences of length m from documents and 2) extracting n-grams from those subsequences. We formally prove that this two-step construction is identical to the relational normalization process that removes the redundancy caused by a non-trivial multivalued dependency. The n-gram/2L index has excellent properties: 1) it significantly reduces the size and improves the Performance compared with the n-gram inverted index with these improvements becoming more marked as the database size gets larger; 2) the query processing time increases only very slightly as the query length gets longer. Experimental results using databases of 1 GBytes show that the size of the n-gram/2L index is reduced by up to 1.9${\~}$2.7 times and, at the same time, the query performance is improved by up to 13.1 times compared with those of the n-gram inverted index.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.8
• /
• pp.353-358
• /
• 2017

An electrical power utility, like an electrical power pole, includes various kinds of sensors for smart services. Temperature data is considered one of the important factors that can influence the smart operations of this utility. This study suggests a method for temperature data analysis for deciding the status of the smart electrical power utilities by using Kalman Filter and Ensemble Model. The suggested approach separates the temperature data according to the different positions of the temperature sensors of a utility, then uses Kalman Filter and Ensemble Model to analyse the characteristics of the temperature variation. With detailed processes, method explains the variation between an external temperature factor like weather temperature data and the sensed temperature data, and then, analysis the temperature data from each position of electrical power utilities. In this process, the suggested method uses Kalman Filter to remove error data and the ensemble model to find out mean value of every hour of electrical data. The result and discussion of temperature analysis were described clearly with the analysed results of electrical data. Finally, we were able to check the working condition of the power devices and the range of the temperature data foe each devices, which may help to indicate any causalities with respect to the devices in the utility pole.

• Journal of the Korean Institute of Gas
• /
• v.7 no.4 s.21
• /
• pp.44-52
• /
• 2003

In this work dynamic heat transfer in a CPFS (cable penetration fire stop) system built in the firewall of nuclear power plants is three-dimensionally investigated to develop a test-simulator that can be used to verify effectiveness of the sealant. Dynamic heat transfer in the fire stop system is formulated in a parabolic PDE (partial differential equation) subjected to a set of initial and boundary conditions. First, the PDE model is divided into two parts; one corresponding to heat transfer in the axial direction and the other corresponding to heat transfer on the vertical planes. The first PDE is converted to a series of ODEs (ordinary differential equations) at finite discrete axial points for applying the numerical method of SOR (successive over-relaxation) to the problem. The ODEs are solved by using an ODE solver In such manner, the axial heat flux can be calculated at least at the finite discrete points. After that, all the planes are separated into finite elements, where the time and spatial functions are assumed to be of orthogonal collocation state at each element. The initial condition of each finite element can be obtained from the above solution. The heat fluxes on the vertical planes are calculated by the Galerkin FEM (finite element method). The CPFS system was modeled, simulated, and analyzed here. The simulation results were illustrated in three-dimensional graphics. Through simulation, it was shown clearly that the temperature distribution was influenced very much by the number, position, and temperature of the cable stream, and that dynamic heat transfer through the cable stream was one of the most dominant factors, and that the feature of heat conduction could be understood as an unsteady-state process.

• Cross-Cultural Studies
• /
• v.38
• /
• pp.191-214
• /
• 2015

Chinese American Writer, Ha Jin has been writing exclusively about the life in his native Communist China. His stories and poems are almost all about the Chinese people so far. In addition, the distinctive Chinese flavour and the inexorably repressive image of China in his works present an 'Other' to the American culture. Such kind of Chineseness can also be found in Ha Jin's works and his career as a writer. The continued demand for knowledge of China, which is created by China's increasingly important role in the globalized economy, sustains the country's position as an Other for America. In his early four novels, Ha Jin portrays a totally repressive image of Communist China, an image of which functions perfectly as a form of otherness for his American readers. In Ha Jin's portrayal, the Chinese masses are subjected to the Communist authority through its bureaucracy and state-economy mechanism, as well as through the godlike image of Mao Zedong. They are to follow the Communist conscience and subscribe to unity-in-difference. Deviation from the one-party rule is intolerable. In each of the novels, Ha Jin presents a specific system of repression. In In the Pond, confrontation against Party authority is contained by a process of complicity. In Waiting, the Party's power is upheld through a system of surveillance in which people act as agents, resulting in a web of power which paralyses love. The Crazed illustrates a play of power by Party officials which, against the backdrop of the Tiananmen Square Massacre, is full of craze itself, driving people either out of sanity or out of the country. War Trash exposes the Communist power's repression to the extreme by presenting a case of dishonour in those whose life is debased as trash by the Party. The repressive image of China produced in these stories, which span over half a century, makes Ha Jin's China a perfect Other for the West. To sum up, Ha Jin's novels construct a repressive image of China. In his novels, Ha Jin exposes the working of repression in particular systems. Through these systems, he problematizes the notion of personal autonomy for Chinese people and proposes for his western/American readers a solution which eventually turns into a re-presentation of American hegemony.

• Journal of Korean Philosophical Society
• /
• v.129
• /
• pp.291-313
• /
• 2014

The aim of this paper is to clarify the Aristotle's conception of change(kinesis). Aristotle defines the change as a process which actualize a potentiality. From Aristotle's definition of the change, a number of consequences flow directly about how to conceptualize it. First, the change is fundamentally directional. Second, if we do not know what the change is directed toward, we do not understand what the change is. Third, everything that changes is caused to change by a distinct cause of change, a changer. Fourth, there is a single actualization of cause and subject of the change. All change, for Aristotle, is the change of an enduring subject. And all change occur in the infinite(to apeiron) which is time, space, matter. It would be absurd to equate the whole and the infinite, for that would be to say that the unlimited had a limit. The infinite does not contain, but in so far as it is infinite, is contained. And due at least in part to its potentiality, the infinite is unknowable. Because it lacks a form. The infinite traditionally derived its dignity from being thought of as a whole in which everything is contained. But Aristotle removes the infinite from its position of majesty. Aristotle's this idea was a revolution in philosophical perspective.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.3
• /
• pp.23-36
• /
• 2012

This study aims to think about the problem of dolmens: the reasons for the presence of dolmens and how to construct it, at the point of view of geographical and geomorphological. The subjects of this study is the dolmens which locate between at Dogok Hyosanri and Chunyang Daesinri Hwasoon-gun, Jeonlanamdo. The study areas in Hyosanri, Daesinri has been observed as follows. First, the long axis direction of Dolmen upper stone and the slope one are the same. Second, tor, block stream, hockey stick, etc. Third, Composition of the soil silt> sand> clay is distributed in the order. Forth, The soil of high quality silt and the roundness of angular, sub-angular-level and the high frequency, peaks of quarts and illite clay minerals show. Fifth, in the result of $SiO_2/Al_2O_3$, $SiO_2/R_2O_3$, and CIA(Chemical Index of Alteration), Hyosanri, Daesinri areas show mechanical weathering was dominant and chemical weathering environment was not being progressed. The blocks used in construction of dolmens had moved to the bottom of slopes by mass movement such as solifluction then them which had been placed in the position seem to be used by people of Bronze. Based on the above results, the process of construction of dolmens can be estimated as follows. They would dig up the ground under the upper stone of dolmens, put the supporting stone in the place, then dig up earth, place into remains, close the obturating stones, then heal up earth.

• Journal of Korean Philosophical Society
• /
• v.141
• /
• pp.263-286
• /
• 2017

It is well known to us that in its enlarged sense Deleuze's philosophy has confrontation with platonism that has dominated the whole western ideas, and in a narrow sense it is confrontation with representative thinking and representative arts. In other words, it's obvious what Deleuze has considered the most important in his whole of ideas is to think not in a representative way but in a non-representational way and to disentangle thinking from its representative image. To examine the way how Deleuze criticize representation, and how he overcome modern ideas is not just to make a clean breast of platonic inheritance. Because they are essential for facing up to the actual circumstances of our contemporaries who have degraded servility of totalitarian thoughts under the thinking of identity, and furthermore, it is essential for overcoming this situation and proceeding to nomadic thinking, liberating thinking. This study is not intended to be a definitive account of all his criticism of representation. Because, as is well known, Deleuze's criticism of representation contains a wide variety. And so this study were limited a relatively small number of points in Deleuze's position on representation as follows. How does Deleuze's criticism of representation has been developed in his theory of paintings? And what does it mean to us today? In this paper, I paid special regard to make sense out Deleuze's concept of 'figure' in his important writings that pertains to an analysis of his criticism of representation, Francis Bacon: The Logic of Sensation. And having traced the development process of the concept of 'figure', I want to understand the implicit meaning of the concept in constant flux of his critical thinking.