• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.3
• /
• pp.208-213
• /
• 2004

This paper is concerned with the theoretical estimation of the single-input single-output(SISO) positive position feedback(PPF) controller and the derivation of the stability conditions for the multi-input multi-output (MIMO) PPF controller. Although the stability condition for the SISO PPF controller was derived in the earlier works, the question regarding the performance estimation of the SISO PPF controller has never been studied theoretically. Hence, the SISO PPF controller for the single degree-of-freedom system was first investigated and then control parameters including gain, the filter frequency, and the damping factor of the PPF controller were analyzed in detail thus providing the design methodology for the SISO PPF controller. In the case of real structure. there are infinite number of natural modes so that some modes are to be controlled by a limited number of actuator and sensor. Based on the theoretical results on the SISO PPF controller, the stability condition for the multi-input multi-output PPF controller was derived when only the few number of modes are to be controlled. The control spillover problem is also discussed in detail.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1352-1355
• /
• 1996

The control of diamond turning is usually achieved through a laser-interferometer feedback of slide position. If the tool post is rigid and the material removal process is relatively static, then such a non-collocated position feedback control scheme may surface. However, as the accuracy requirement gets tighter and desired surface contours become more complex, the need for a direct tool-tip sensing becomes inevitable. The physical constraints of the machining process prohibit any reasonable implementation of a tool-tip motion measurement. It is proposed that the measured force normal to the face of the workpiece can be filtered through an appropriate admittance transfer function to result in the estimated depth of cut. This can be compared to the desired depth of cut to generate the adjustment control action in addition to position feedback control. In this work, the design methodology on the admittance model-based control with a conventional controller is presented. The recursive least-squares algorithm with forgetting factor is proposed to identify the parameters and update the cutting process in real time. The normal cutting forces are measured to identify the cutting dynamics in the real diamond turning process using the precision dynamometer. Based on the parameter estimation of cutting dynamics and the admittance model-based nanodynamic control scheme, simulation results are shown.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.53-56
• /
• 2001

In this paper we discuss a direct satellite broadcasting system for vehicle. The proposed satellite-steering algorithm and controller based on it are designed for a communication and broadcasting system which uses the Mugungwha satellite. The Mugungwha satellite that the proposed system should steer is a geostationary orbit device. The satellite-steering algorithm computes azimuth and elevation with reference to a stationary point on earth. This is extended to a real satellite steering algorithm that considers position and attitude. Real moving position and attitude are represented by latitude, longitude, roll, pitch and yaw. To apply these five pieces of information to the reference satellite steering algorithm, we introduce Euler's degree coordinates that express independently the rotation of each axis relative to an axis. There are two ways a basic algorithm of the antenna of a vehicle can track and orient to satellite. One way is a feedback loop method for broadcasting gain, while the other is a feedback loop method for position and attitude of a vehicle. In the present paper, we design a controller of satellite broadcasting system for a vehicle using an algorithm that combines the two methods. We performed a simulation and experiment to prove effectiveness.

• The Journal of Korean Physical Therapy
• /
• v.24 no.1
• /
• pp.1-6
• /
• 2012

Purpose: The grip strength is influenced by various factors, such as position of the upper extremity, characteristics of the hand, and general physical condition. In this study, we investigated whether abdominal muscle activity in combination with the abdominal drawing-in maneuver has any effect on the grip strength in healthy young adults. Methods: This study included 31 healthy subjects (16 males, 15 females). We used surface electromyography and pressure bio-feedback unit for this experiment. All Subjects were placed in a cock-lying position with comfort and the grip strength was measured. On the following day, the pressure bio-feedback unit was placed beneath their fifth lumbar vertebra, and the, grip strength was measured again. This time, the measurement was taken while drawing-in their abdomen below the navel gently and gradually, while maintaining a neutral pelvic position. Results: The grip strength was significantly increased when subjects performed the drawing-in maneuver than when they were comfortable (p<0.05). In addition, activations of the rectus abdominal muscles significantly increased (p<0.05). Conclusion: In the current study, we found that abdominal muscle activity, in combination with the abdominal drawing-in maneuver, affected the grip strength, positively. Therefore, we suggest that this result should be considered when evaluating the grip strength.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.149-154
• /
• 2002

In a high speed spindle system, it is very important to monitor the state of rotating rotor. Particularly in active control spindle system, the position sensor must provide feedback to the control system on the exact position of the rotor. In order to monitor the state of a high speed spindle exactly, high accuracy and wide frequency bandwidth of sensors are important. This paper observes the factors which has an effect on dynamic performances of inductive position sensor.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.932-935
• /
• 1996

This paper proposes position estimation and path-tracking of a wheeled-mobile robot(WMR). Odometry and two distance measuring sensors are used to measure distance between guide wall and body and to locate its own position. And extended Kalman filter is introduced to fusion sensors and reduce noise. State feedback controller using the estimated position and path-tracking miles guidance control system. The computer simulation shows that proposed algorithm is well coincide with theoretical approach.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.4
• /
• pp.203-208
• /
• 2001

In this paper, a novel dual-type positioning mechanism using a voice coil motor(VCM) and a piezoelectric actuator is proposed for optical disk drive or near-field recording type drive. The VCM is used for a coarse motion actuator and the piezoelectric actuator, "S" configuration deflection motion when voltage applied, is used for a fine motion actuator with self-sensing technique, which allows it to sense and actuate simultaneously in a closed loop frame work. When the VCM rotates and stops, a position feedback control algorithm is adopted to further control residu vibration. The performance of the control scheme is confirmed through simulations and experiments.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.257-262
• /
• 1994

This paper describes an autotuning fuzzy PID controller for a position control of DC serve motor. Because ZNM(Ziegler-Nichols Method) with relay feedback has the difficulty in re-tuning the PID parameters and adaptive method has complex algorithm, a new method to overcome those problems is required. The proposed scheme determines the initial PID gains by using ZNM with relay feedback, and then re-tunes the optimal PID parameters by using fuzzy expert system whenever control conditions are changed. To show the validity of the proposed method, a position control of DC servo motor is illustrated by computer simulation and is experimented by a designed controller.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.11
• /
• pp.987-994
• /
• 2000

A Linear Pulse Motor (LPM) is a direct drive motor that has good performance in terms of accuracy, velocity and acceleration compared to the conventional rotating system with toothed belts and ball screws. However, since an LPM needs supporting devices which maintain constant air-gap and has strong nonlinearity caused by leakage magnetic flux, friction and cogging, etc., there are many difficulties in improvement on accuracy with conventional control theory. Moreover, when designing the position controller of LPM, the modeling error and load variations has not been considered. In order to compensate these components, the neural network with conventional feedback controller is introduced. This neural network of feedback error learning type changes the current commands to improve position accuracy. As a result of experiments, we observes that more accurate position control is possible compared to conventional controller.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.2
• /
• pp.289-296
• /
• 2015

In this paper, we propose the nonlinear control based on singular perturbation theory for position tracking and yaw regulation of planar motor. Singular perturbation theory is characterized by the existence of slow and fast transients in the system dynamics. The proposed method consists of auxiliary control to decouple error dynamics. We develop model reduction with control input. Also, we derIve decoupled error dynamics with auxiliary input. The controller is designed in order to guarantee the desired position and yaw regulation without current feedback or estimation. Simulation results validate the effect of proposed method.