• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.221-222
• /
• 2017

본 논문에서는 위치 센서에 의존하지 않는 매입형 영구자석 전동기의 센서리스 구동 시 전압 왜곡으로 인해 나타나는 위치 추정 오차를 이론적으로 분석하고자 한다. 특히, 추정 d축에 맥동하는 구형파 전압을 주입하는 방법에서 주입하는 신호의 주파수에 따라 위치 추정 성능이 달라지는 현상에 초점을 맞춘다. 무부하에서 스위칭 주파수의 신호를 주입할 때 전압 왜곡은 on/off sequence에서 서로 반대의 위상을 갖는 역상분 2고조파의 형태로 나타나며, 위치 추정 오차는 3고조파의 형태로 나타난다. 반면, 반스위칭 주파수의 신호를 주입하는 경우에는 샘플링 주기 동안 주입 전압 왜곡의 효과가 상쇄되기 때문에 인덕턴스의 영향만이 주로 고려되어 위치 추정 오차가 6고조파의 형태로 나타난다. 시뮬레이션과 실험을 통해 이론적 분석의 타당성을 검증하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.901-905
• /
• 2005

It is very important to arrange landmarks when a mobile robot needs to measure its own location. So, it has been discussed often how to arrange landmarks in the optimal way until now. We, there, chose the RFID (Radio frequency Identification) tags as landmarks which can be observed by a mobile robot, and demonstrated the possibility of the optimal arrangement of them. For this work first, we defined the optimization problem and its parameters for the arrangement of tags. Second, we proposed the algorithm which can be applied to the optimization problem. Finally we could obtain closely optimal and practical arrangement with the minimum number of landmarks which satisfied the necessary condition by experimentation.

• ETRI Journal
• /
• v.45 no.5
• /
• pp.758-767
• /
• 2023

In this study, we introduce a loosely coupled relative position estimation method that utilizes a decentralized ultrawideband (UWB), Global Navigation Support System and inertial navigation system for flight controllers (FCs). Key obstacles to multidrone collaboration include relative position errors and the absence of communication devices. To address this, we provide an extended Kalman filter-based algorithm and module that correct distance errors by fusing UWB data acquired through random communications. Via simulations, we confirm the feasibility of the algorithm and verify its distance error correction performance according to the amount of communications. Real-world tests confirm the algorithm's effectiveness on FCs and the potential for multidrone collaboration in real environments. This method can be used to correct relative multidrone positions during collaborative transportation and simultaneous localization and mapping applications.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.180-182
• /
• 2021

This paper proposes a method for estimating the location of a user using a beacon to provide a service in an indoor environment. To estimate the location using the beacon, a Gaussian filter was applied to the RSSI value of the beacon, and the distance conversion function was obtained through the filtered RSSI value to estimate the tag location by trilateration. Then, in the indoor space where the beacons are installed, the location estimation accuracy of 8 places where 3 beacons are at a certain distance was confirmed. As a result, it was possible to confirm the position estimation accuracy of ±0.097 standard deviation and 0.242 distance error.

• Nuclear Engineering and Technology
• /
• v.44 no.4
• /
• pp.355-362
• /
• 2012

The aim of this study was to develop a bundle position-wise linear model (BPLM) to predict Pressure Tube (PT) diametral creep employing the previously measured PT diameters and operating conditions. There are twelve bundles in a fuel channel, and for each bundle a linear model was developed by using the dependent variables, such as the fast neutron fluences and the bundle coolant temperatures. The training data set was selected using the subtractive clustering method. The data of 39 channels that consist of 80 percent of a total of 49 measured channels from Units 2, 3, and 4 of the Wolsung nuclear plant in Korea were used to develop the BPLM. The data from the remaining 10 channels were used to test the developed BPLM. The BPLM was optimized by the maximum likelihood estimation method. The developed BPLM to predict PT diametral creep was verified using the operating data gathered from Units 2, 3, and 4. Two error components for the BPLM, which are the epistemic error and the aleatory error, were generated. The diametral creep prediction and two error components will be used for the generation of the regional overpower trip setpoint at the corresponding effective full power days. The root mean square (RMS) errors were also generated and compared to those from the current prediction method. The RMS errors were found to be less than the previous errors.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.1
• /
• pp.34-40
• /
• 2005

In this paper, we describe the modeling for the 3D robot laser scanning system consisting of a laser stripe projector, camera, and 5-DOF robot and propose its calibration method. Nonlinear radial distortion in the camera model is considered for improving the calibration accuracy. The 3D range data is calculated using the optical triangulation principle which uses the geometrical relationship between the camera and the laser stripe plane. For optimal estimation of the system model parameters, real-coded genetic algorithm is applied in the calibration process. Experimental results show that the constructed system is able to measure the 3D position within about 1mm error. The proposed scheme could be applied to the kinematically dissimilar robot system without losing the generality and has a potential for recognition for the unknown environment.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.5
• /
• pp.636-643
• /
• 2009

NHC means that the velocity of the vehicle in the plane perpendicular to the forward direction is almost zero. The main error source of NHC is the mounting misalignment which is the difference between the body frame of a land vehicle and the sensor frame of an inertial measurement unit. This paper suggests new NHC algorithm that can reduce position errors by real-time estimation of mounting misalignment. Then NHC/ZUPT integrated land navigation system is designed and its performances are analyzed by simulations with van test data. Simulation results show that the proposed NHC/ZUPT land navigation system improves navigation accuracy regardless of misalignment angle and is very useful when SDINS operates stand-alone for land vehicle navigation with large mounting misalignment.

• The Journal of Korea Robotics Society
• /
• v.1 no.2
• /
• pp.125-134
• /
• 2006

The problem of establishing the servo system to reach the desired location keeping all features in the field of view and following a straight line is considered. In addition, robustness of camera calibration parameters is considered in this paper. The proposed approach is based on switching from position-based visual servoing (PBVS) to image-based visual servoing (IBVS) and allows the camera path to follow a straight line. To achieve the objective, a pose estimation method is required; the camera's target pose is estimated from the obtained images without the knowledge of the object. A switched control law moves the camera equipped to a robot end-effector near the desired location following a straight line in Cartesian space and then positions it to the desired pose with robustness to camera calibration error. Finally simulation results show the feasibility of the proposed visual servoing technique.

• Journal of Power Electronics
• /
• v.6 no.1
• /
• pp.8-17
• /
• 2006

In this paper, we propose a fault-tolerant control system for the position control and vibration suppression of a flexible arm robot. The proposed control system has a strain gauge sensor signal observer based on a reaction force observer and detects a fault by monitoring an estimated error. In order to improve the estimation accuracy, the plant parameters included in the sensor signal observer are updated by using the strain gauge sensor signal in normal time through the adaptive law. After fault detection, the proposed control system exchanges the faulty sensor signal for the estimated one and switches to a fault mode controller so as to maintain the stability and the control performance. We confirmed the effectiveness of the proposed control system through several experiments.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.2
• /
• pp.276-281
• /
• 2010

The switched reluctance motor (SRM) is an older member of the electric machines family. Its simple structure, ruggedness and inexpensive manufacturing potential make it extremely attractive for industrial applications. However, these merits are overshadowed by its inherent high torque ripple, acoustic noise and difficulty to control. In this paper, a control strategy of the angle position control for the SRM drive based on fuzzy logic is illustrated. The input control parameter, the output control parameter and fuzzy control with FAM table formulation strategy are described and simulated with control patterns, and the decision form of the fuzzy control is illustrated and simulated, and the scope of implementing in a Fuzzy based ASIC chip is enlightened with literature support.