• PNF and Movement
• /
• 제17권3호
• /
• pp.401-409
• /
• 2019

Purpose: This study investigated the muscular activity of abdominal muscles during a variety of plank exercises following changes in the leg and head positions. Methods: Thirty healthy individuals participated in this study. They performed six variations of plank exercises, including three changes in head position and two changes in leg position. Each plank was defined as head neutral-leg neutral, head up-leg neutral, head down-leg neutral, head neutral-leg wide, head up-leg wide, and head down-leg wide. During the plank excises, the muscle activities of the rectus abdominis, internal oblique, erector spinae, and upper trapezius were measured. Results: The head down position significantly increased the rectus abdominis activity compared to other head positions (p<0.05). On the other hand, the upper trapezius muscle activity was significantly higher with the head up position compared to other head positions (p<0.05). Regardless of head positions, both the rectus abdominis and internal oblique muscles were significantly activated with leg wide position compared to the leg neutral position (p<0.05). Conclusion: Head and leg positions could change the muscular activities of abdominal muscles during plank exercises. For example, the head down position is effective for activating the rectus abdominis while the leg wide position could be advantageous for enhancing the internal oblique and rectus abdominis.

• The Journal of Korean Physical Therapy
• /
• 제32권1호
• /
• pp.52-57
• /
• 2020

Purpose: This study compared the muscle activities of the Vastus medialis oblique (VMO) and the Vastus lateralis (VL) at three different knee extension angles: 90°, 135°, and 180° in the sitting position. Methods: Twenty subjects between 20 and 30 years of age participated in the study. A mobile phone application called the Clinometer was used to measure the knee joint angle. Electromyography (EMG) was performed to measure the muscle activities of the VMO and VL muscles during knee isometric extension exercises. The pulling sensor was used to maintain 70% of the maximum strength of the knee extensor continuously in the sitting position. After attaching the EMG sensor, the subjects were asked to perform isometric knee extension exercises randomly among three knee extension angles (90°, 135°, or 180°) in the sitting position. One-way repeated measures analysis of the variance and a Bonferroni post hoc test was used to identify the VMO and VL muscle activity during knee extension angles among 90°, 135°, and 180°. Results: The VMO and VL muscle activities increased with increasing knee extension angle in the sitting position (p<0.01). Conclusions: Knee extension exercise at a 180° angle in the sitting position can be recommended to increase the muscle activity of the VMO and VL muscle activities efficiently.

• 치과방사선
• /
• 제17권1호
• /
• pp.175-181
• /
• 1987

The purpose of this study is to know the value of the photographic subtraction technic in the transcranial oblique lateral projection of the TMJ. The author examined the transcranial oblique lateral projection radiographs which comprise 50 cases of 32 persons, compared the transcranial oblique lateral projection films and those subtraction films. The following results were obtained. 1) The condyle at closed jaw position had showed a reversed tone image, but the condyle at the opening position had showed a re-reversed ordinary image. Both condyles had showed one subtraction film because radiographic interpretation of TMJ was easy. 2) On 50 cases of subtraction films, 46 cases had showed same radiographic images compared with trascranial oblique lateral projection films. Four cases (3 cases of erosion, 1 cases of sclerosis) had showed additional changes of images so that capability of interpretation was improved.

• 한국전문물리치료학회지
• /
• 제18권1호
• /
• pp.9-17
• /
• 2011

The purpose of this study was to assess visual biofeedback's influence on trunk muscles' (EMG) activity and endurance holding time for correct position during whole-body tilt exercise. For the study, we recruited 14 volunteers who showed no symptom of lumbar disease during medical tests. We measured the EMG activity of their rectus abdominis, external abdominal oblique, internal abdominal oblique and erector spinae muscles, and their endurance holding time for correct position during $40^{\circ}$ anterior and posterior whole-body tilt under two conditions: whole-body tilt with and without visual biofeedback. Resistance with gravitational force on the trunk during whole-body tilt was applied by using a device that had a monitor on which the subjects could check their alignment and that sounded an alarm if a subject's alignment collapsed. The study showed an increase in the EMG activity of external abdominal oblique, internal abdominal oblique/rectus abdominis ratio and endurance holding time for correct position during both $40^{\circ}$ anterior and posterior whole-body tilt with visual biofeedback compared with without visual biofeedback (p<.05). We suggest that the whole-body tilt exercise with visual biofeedback could be a beneficial strategy for selectively strengthening the internal abdominal oblique muscle and minimizing the rectus abdominis muscle's activity while maintaining correct alignment during whole-body tilt exercise.

• 근관절건강학회지
• /
• 제17권2호
• /
• pp.142-150
• /
• 2010

Purpose: The purpose of this study was to examine EMG activities and VMO/VL ratio of the vastus medialis oblique, vastus lateralis, and rectus femoris during squat exercise (knee angle: 15, 45, and 60 degrees; tibial rotation: internal rotation, neutral, and external rotation). Methods: Twelve subjects performed squat exercise at each knee angle and tibial rotation while electromyographic (EMG) activity was collected. Statistical analysis consisted of two-way repeated measures analysis of variance with post hoc analysis. Results: There were significant main effects of knee angles and foot positions and interaction effect on EMG activities of vastus medialis oblique and vastus lateralis. VMO/VL ratios were significantly different by tibial rotations and there was an interaction effect. A neutral position produced significantly more VMO/VL activity ratio than that from internally rotated position and externally rotated position at 60 degrees. Conclusion: Considering the interaction effects for EMG activity across quadriceps muscles tested, the 60 degrees knee angle with a neutral foot position may provide the most effective condition for patients with acute patellofemoral syndrome.

• The Journal of Korean Physical Therapy
• /
• 제27권4호
• /
• pp.270-274
• /
• 2015

Purpose: The purpose of this study was to examine the electromyographic (EMG) activity of the abdominal muscles and to compare the activity ratios of the bilateral rectus abdominis (RA) to oblique abdominal muscles during shoulder abduction in opposite directions with single leg raising (SLR) performed in the supine position on a foam roller. Methods: Fifteen healthy subjects were recruited to the study. Each subject lay on the foam roller and performed left single leg raising with right or left shoulder $90^{\circ}$ abduction (Abd); performed in a random order. Surface EMG recordings of selected abdominal muscles (i.e., the RA, external oblique abdominis [EO], internal oblique abdominis [IO], and transverse abdominis [TrA]) were normalized to maximum voluntary isometric contraction. EO/RA and IO and TrA/RA ratios were determined with surface EMG. Data were analyzed by Independent t-test. The statistical significance level was p<0.05. Results: The results were as follows: (1) the right RA, left EO, and right IO and TrA muscle activities increased significantly at the left SLR with left Abd compared to the left SLR with right Abd (p<0.05); and (2) the ratio of right EO/RA activity increased significantly at the left SLR with right Abd compared to left Abd (p<0.05). Conclusion: These findings suggest that left SLR with left Abd on a foam roller is an appropriate exercise for activation of specific oblique abdominal muscles.

• 구강회복응용과학지
• /
• 제21권2호
• /
• pp.169-182
• /
• 2005

The purpose of this study was to compare the stress distribution around the surrounding bone according to the splinted and non-splinted conditions on the finite element models of the two implant crowns with the different vertical bone level. The finite element model was designed with the parallel placement of the two fixtures ($4.0mm{\times}11.5mm$) with reverse buttress thread on the mandibular 1st and 2nd molars. As the bone quality, the inner cancellous bone and the outer 2 mm cortical bone were designed, and the cortical and cancellous bone were assumed to be perfectly bonded to the implant fixture. The splinted model(Model 1) had 2 mm contact surface and the non-splinted model(Model 2) had $8{\mu}m$ gap between two implant crowns. Two group (Splinted and non-splinted) was loaded with 200 N magnitude in the vertical and oblique directions on the loading point position on the central position of the crown, the 2 mm and 4 mm buccal offset point from the central position. Von Mises stress value was recorded and compared in the fixture-bone interface in the bucco-lingual and mesio-distal sections. The results were as follows; 1. In the vertical loading condition of central position, the stress was distributed on the cortical bone and the cancellous bone around the thread of the fixture in the splinted and non-splinted models. In the oblique loading condition, the stress was concentrated toward the cortical bone of the fixture neck, and the neck portion of 2nd molar in the non-splinted model was concentrated higher than that of 1st molar compared to the splinted model. 2. In the 2 mm buccal offset position of the vertical loading compared to the central vertical loading, stress pattern was shifted from apical third portion of the fixture to upper third portion of that. In the oblique loading condition, the stress was distributed over the fixture-bone interface. 3. In the 4 mm buccal offset position of the vertical loading, stress pattern was concentrated on the cortical bone around the buccal side of the fixture thread and shifted from apical third portion of the fixture to upper third portion of that in the splinted and non-splinted models. In the oblique loading, stresses pattern was distributed to the outer position of the neck portion of the fixture thread on the mesio-distal section in the splinted and non-splinted models. Above the results, it was concluded that the direction of loading condition was a key factor to effect the pattern and magnitude of stress over the surrounding bone of the fixture under the vertical and oblique loading conditions, although the type with or without proximal contact did not effect to the stress distribution.

• 한국산학기술학회논문지
• /
• 제20권3호
• /
• pp.224-230
• /
• 2019

본 연구의 목적은 이마면에서 엉덩관절 위치에 따라 배근육들의 근활성도를 측정하여 비교함으로 이마면에서 엉덩관절의 위치가 배근육들의 근활성도에 영향을 미치는지 알아보는 것이다. 연구방법은 20대의 건강한 남녀 26명을 대상으로 엉덩관절 중립, 모음, 그리고 벌림 자세에 따라 교각운동을 하였을 때 표면 근전도 장비를 이용하여 양쪽 배곧은근과 배바깥빗근, 배속빗근의 근활성도를 비교하였다. 통계 방법은 반복측정 일요인 분산분석을 실시하였고, 유의수준은 0.05로 하였다. 연구 결과 배바깥빗근과 배속빗근은 이마면에서 엉덩관절 위치에 따라 유의한 차이가 있었고, 배곧은근은 유의한 차이가 없었다. 양쪽 배바깥빗근과 왼쪽 배속빗근은 엉덩관절 중립자세보다 엉덩관절 모음 자세에서 근활성도가 유의하게 증가하였으며 오른쪽 배속빗근은 엉덩관절 벌림 자세보다 엉덩관절 모음 자세에서 근활성도가 유의하게 증가하였다. 본 연구를 통해 엉덩관절 모음 자세가 다른 자세들에 비해 안정화 운동에 더욱 효과적일 수 있다는 것을 알 수 있었고, 안정화 운동 프로그램을 고안할 때 운동의 강도를 조절하기 위해 이마면에서 엉덩관절의 위치에 대한 요소를 적용할 수 있을 것이다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권1호
• /
• pp.52-59
• /
• 2006

Purpose: The purpose of this study was to evaluate the influence of apical-coronal implant position on the stress distribution after occlusal and oblique loading. Materials and Methods: The cortical and cancellous bone was assumed to be isotropic, homogeneous, and linearly elastic. The implant was apposed to cortical bone in the crestal region and to cancellous bone for the remainder of the implant-bone interface. The cancellous core was surrounded by 2-mm-thick cortical bone. An axial load of 200 N was assumed and a 200-N oblique load was applied at a buccal inclination of 30 degrees to the center of the pontic and buccal cusps. The 3-D geometry modeled in Iron CAD was interfaced with ANSYS. Results: When only the stress in the bone was compared, the minimal principal stress at load Points A and B, with a axial load applied at 90 degrees or an oblique load applied at 30 degrees, for model 5. The von Mises stress in the screw of model 5 was minimal at Points A and B, for 90- and 30-degree loads. When the von Mises stress of the abutment screw was compared at Points A and B, and a 30-degree oblique load, the maximum principal stress was seen with model 2, while the minimum principal stress was with model 5. In the case of implant, the model that received maximum von Mises stress was model 1 with the load Point A and Point B, axial load applied in 90-degree, and oblique load applied in 30-degree. Discussion and Conclusions: These results suggests that implantation should be done at the supracrestal level only when necessary, since it results in higher stress than when implantation is done at or below the alveolar bone level. Within the limited this study, we recommend the use of supracrestal apical-coronal positioning in the case of clinical indications.

• 대한방사선기술학회지:방사선기술과학
• /
• 제40권4호
• /
• pp.543-548
• /
• 2017

경추 사방향 검사에서 전후면과 후전면 자세에 따른 갑상선 표면선량을 평가하여 검사 방법의 유용성을 알아보고자 하였다. 선량 측정은 Rando phantom을 이용하여 갑상선의 위치인 경추 4~5번에 선량계를 부착 시켜 측정하였다. 연구 결과, 전후면 사방향 자세와 후전면 사방향 자세의 표면선량 값은 kVp 변화에 따라 각각 $595.08{\pm}215.01{\mu}Gy$, $64.21{\pm}33.49{\mu}Gy$이었으며, mAs 변화에 따라 각각 $445.20{\pm}230.90{\mu}Gy$, $44.51{\pm}22.77{\mu}Gy$로 나타났다. 후전면 사방향 자세는 전후면 사방향 자세에 비해 갑상선이 받는 표면선량을 약 90% 감소시킬 수 있었으며, 각각의 비교에서 통계적으로 유의한 차이를 보였다(p<0.001). 따라서 방사선 감수성이 민감한 갑상선이 조사야 내에 포함된 경추검사에서는 환자의 표면선량을 줄이는데 후전면 사방향 자세가 유용할 것으로 판단된다.