• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.775-778
• /
• 1999

Accelerated chloride diffusion tests were carried out to estimate the chloride diffusion coefficient of concrete using ordinary portland cement, low heat belite-rich portland cement, and sulphate resistant portland cement. Concrete using low heat belite-rich portland cement showed a high diffusion coefficient due to delayed hydration of low heat belite rich portland cement, while the diffusion coefficients of concrete using sulphate resistant portland cement and ordinary portland cement were low.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.163-169
• /
• 1997

The sea water resistance of cement and concrete must be considered when it is used for construction on the seashore of in the ocean. The concrete specimens using seven type of cements such as ordinary Portland cement, moderate heat Portland cement, sulfate resistance Portland cement, type A. B. C Portland blastfurnace slag cement and Portland flyash cement were immersed for 10 years in seawater in Kunsan. This study proved that moderate heat Portland cement, sulfate resistance Portland cement, type A Portland blastfurnace slag cement had higher resistance for seawater.

• Advances in concrete construction
• /
• 제8권1호
• /
• pp.47-54
• /
• 2019

Portland cement pervious concrete has been expected to have good water permeability, mechanical properties and abrasion resistance at the same time when Portland cement pervious concrete is applied to the actual vehicle pavement. In this study, the coarse aggregate and cement were replaced by the fine aggregate and the silica fume to improve actual road performance Portland cement pervious concrete. The Mechanical properties, the water permeability and the abrasion resistance of Portland cement pervious concrete were investigated. The results show that the compressive strength, the flexural strength and the abrasion resistance are increased when the fine aggregate and the silica fume are added to Portland cement pervious concrete separately. However, the porosity and the water permeability are decreased simultaneously. With assistance of silica fume and fine aggregate simultaneously, Portland cement pervious concrete could achieve a higher strength. The compressive strength, the flexural strength and the abrasion resistance of Portland cement pervious concrete mixed with 5% fine aggregates and 8% silica fume are increased by 93.1%, 65% and 65.2%, respectively. The porosity and the water permeability are decreased by 22.4% and 85% when Portland cement pervious concrete is mixed with 5% fine aggregate and 8% silica fume. Therefore, the replacement ratio of the fine aggregates and the silica fume should be considered comprehensively and determined on the premise of ensuring the water permeability coefficient.

• Restorative Dentistry and Endodontics
• /
• 제34권5호
• /
• pp.415-423
• /
• 2009

$\beta$-glycerophosphate는 치수의 상아모세포 분화를 촉진하는 물질이다. Portland cement는 수중에서 장기간에 걸쳐 용해되기 때문에 $\beta$-glycerophosphate을 혼합한 Portland cement는 수산화칼슘과 함께 $\beta$-glycerophosphate를 장기간 용출하게 된다. 본 실험에서는 $\beta$-glycerophosphate을 혼합한 Portland cament에 대한 인간치수세포의 반응을 알아보았다. 인간 치수 세포에 대한 $\beta$-glycerophosphate의 효과를 알아보기 위해 다양한 농도의 $\beta$-glycerophosphate와 dexamethasone에 대한 인간 치수 세포의 ALP activity을 측정하였고 alizarin red S로 염색하여 관찰하였다. $\beta$-glycerophosphate가 다양한 농도(10 mM, 100 mM, 1 M)로 혼합된 Portland cement에 대한 인간 치수 세포의 MTS assay, ALP activity를 측정하고 SEM으로 관찰하였다. 치수세포의 석회화 정도를 관찰한 연구에서 $\beta$-glycerophosphate와 dexamethasone 단독으로 적용하였을 때 거의 효과가 없었으나 5 mM $\beta$-glycerophosphate와 100 nM dexamethasone을 혼합 적용하였을 때 가장 높은 ALP acticity를 보였다. 분화제를 첨가하거나 첨가하지 않은 모든 실험군에서 치수세포에 대한 독성은 관찰되지 않았으며 Portland cement에 10 mM $\beta$-glycerophosphate을 혼합한 시편의 ALP activity가 대조군에 비교하여 가장 많이 증가하였다. 결론적으로 $\beta$-glycerophosphate이 혼합된 Portland cement는 세포 독성이 없으며 첨가물이 없는 Portland cement에 비해 치수 분화 및 석회화를 더 많이 일으키므로 임상적으로 $\beta$-glycerophosphate을 혼합한 Portland cement 적용은 재료 하방에 더 많은 상아질을 형성시킬 것으로 추측된다.

• Restorative Dentistry and Endodontics
• /
• 제35권3호
• /
• pp.149-151
• /
• 2010

Since its introduction in 1993, Mineral Trioxide Aggregate (MTA) has been shown to be superior to others in sealing, biocompatibility, and many other aspects of clinical endodontics. MTA is primarily Portland cement with bismuth oxide as a radiopacitifier. Although some studies suggested that the reasonable-priced Portland cement could be used instead of MTA, but MTAs are different from Portland cement in its composition, especially in heavy metal contents. Therefore, clinicians should be meticulous adapting the Portland cement as a MTA substitute.

• Advances in concrete construction
• /
• 제4권1호
• /
• pp.27-35
• /
• 2016

The quantity of construction and demolition waste has been greatly increasing recently. It causes many problems to the environment. For this reason, demolition waste management becomes inevitable in order to overcome the environmental issues. The present study aims to evaluate the effects of using recycled coarse aggregate, which is generated from construction and demolition waste, on the properties of recycled aggregate concrete. An experimental investigation on the strength characteristics of concrete made with recycled coarse aggregate is presented and discussed in this paper. In this study, Portland Pozzolana Cement (fly ash based) is used instead of ordinary Portland cement. The results of this investigation show the possibility of the use of recycled coarse aggregates in the production of fresh concrete. Use of demolition waste as coarse aggregate will lead to a cleaner environment with a significant reduction of the consumption of natural resources. A comparative study on the strength characteristics of recycled aggregate concrete made with Ordinary Portland Cement and Portland Pozzolana Cement is presented and discussed in this paper.

• 대한화학회지
• /
• 제55권3호
• /
• pp.490-494
• /
• 2011

이산화탄소 방출을 줄이기 위해 포트랜드 시멘트 성분 일부를 시멘트 보충재를 혼합해준 시멘트의 제조에 대해 연구하였다. 이산화탄소를 0.18 kg $CO_2$/kg 정도 줄이기 위해 포트랜드 시멘트에 보충재를 20 wt% 정도 혼합하였다. 이 혼합시멘트의 압축 강도는 포트랜드 시멘트 ASTM C-150의 표준치를 초과하며, 28일간의 굳는 과정중에 37 MPa의 압축 강도를 가졌다. 혼합시멘트의 미세구조는 포트랜드 시멘트와 유사하였다.

• 시멘트 심포지엄
• /
• 1호
• /
• pp.23-30
• /
• 1973

In this paper, the reaction of the formation of portland cement clinker is reviewed. 1. When the specimen is heat-treated, the glassy phase melt with increasing temperature, and the starting materials are dissolved into the melt. After the melt is saturat

• 한국안전학회지
• /
• 제16권1호
• /
• pp.65-72
• /
• 2001

Portland cement concrete is made with coarse aggregate, fine aggregate, portland cement, water and, in some cases, selected chemical admixture such as air-entraining agents, water reducer, superplasticizer, and so on, and mineral admixture such as fly ash, silica fume, slags, etc. Typically, in the concrete, the coarse aggregate and fine aggregate will occupy approximately 80 percent of the total volume of the finished mixture. Therefore, the coarse and fine aggregates affect to the properties of the portland cement concrete. As the deposits of natural sands have slowly been depleted, it has become necessary and economical to produce crushed sand(manufactured fine aggregate). It is reported that crushed sand differs from natural sands in gradation, particle shape and texture, and that the content of micro fines in the crushed sand affect to the quality of the portland cement concrete. Therefore, the purpose of this paper is to investigate the characteristics of fresh and hardened concrete with higher micro fines. This study provides a firm data to apply crushed sand with higher micro fines.

• 한국농공학회논문집
• /
• 제46권4호
• /
• pp.49-55
• /
• 2004

Properties of concrete using low heat portland cement is different from using ordinary portland cement and temperature of aggregate can be expected to have an important influence on its properties. In this study, experiment by setting up 5 levels (40, 30, 20, 4, $-2^{\circ}C$) by temperature of aggregate for evaluation properties of concrete using low heat portland cement was conducted. The experiments include slump test, air content test, change of slump, change of air content and compressive strength of concrete test. As the result of experiments, slump and air content was decreased by increasing temperature of aggregate. But it was not exceeding it's limit. Change of slump and air content was rapidly decrease by decreasing temperature of aggregate. At early age, compressive strength was influenced by the temperature of aggregate.