• Journal of electromagnetic engineering and science
• /
• v.10 no.4
• /
• pp.316-321
• /
• 2010

This paper presents a novel fourth harmonic mixer with new structure. The traditional 3-ports fourth harmonic mixer and the novel fourth harmonic mixer are designed by ADS, HFSS and CST simulator. The mixers have been fabricated and tested. The size of the traditional 3-ports fourth harmonic mixer is $12{\times}15$ mm, and the best conversion loss is 18.7 dB according to the measurement. Since the traditional 3-port mixer size is too large to be ranked, we design a novel fourth harmonic mixer for imaging system. The width of the mixing module in the novel fourth harmonic mixer is only 3.65 mm, and this size is fully capable to meet the mixer unit space which is not greater than 5 mm. The simulation result shows that the mixer has good performance, and the experiment result shows that the best conversion loss of the novel fourth harmonic mixer is 16.3 dB at RF signal of 91.3 GHz.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.6
• /
• pp.269-274
• /
• 2014

The experimental performance evaluation of a cylindrical steam reformer with various thermal conditions has been conducted. The bottom space of the cylindrical reactor was packed with Ruthenium (Ru) catalyst. A three-segment furnace was installed to create the axially variable boundary temperature distribution. Six K-type thermocouples were inserted into the catalyst layer, and three exhaust ports were fabricated on the side wall along the flow direction. The exhausted gases at each port were analyzed by using gas chromatograph (GC) system. The experimental results showed that the reforming reaction occurs intensively in the upstream region and more hydrogen is obtained when the intake gas is sufficiently heated up through the enhanced steam reforming (SR) reaction. The axially increasing boundary temperature setup provided the maximally accumulated reforming efficiency of 74.8%, when the reactor was placed at the 3rd section of the furnace.

• Journal of architectural history
• /
• v.23 no.2
• /
• pp.39-52
• /
• 2014

This study researched changes over time regarding the location and spatial characteristics of modern meteorological stations, and examined the characteristics of modern meteorological station construction using the location and spatial characteristics of the Busan Meteorological Station. First, meteorological stations were located in port areas, and then moved to high altitude areas for stable meteorological observation beginning in the transition phase. Here, office buildings and residences were joined, but were separated due to the increase in functions from the stabilization phase. Second, as for spatial composition, in the establishment phase, existing buildings were used, and the scale of newly constructed buildings differed according to time and area. However, after the Japan-Korea Annexation, with increased funds and increased observation equipment, floor plans subdivided by function started to appear. In the stabilization phase, space was subdivided with redundancy due to the increase in functions. In the wartime transition phase, '一' shaped floor plans with redundancy became the norm. Meanwhile, the location of the maritime customs where the first meteorological observations took place after the opening of the ports, and the location and construction of the Busan Temporary Observatory built in the meteorological observation transition phase (1905) were investigated. Also, through the investigation of the Busan Meteorological Observatory, newly constructed before 1934, the location and spatial characteristics of modern era meteorological observatories were studied.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1421-1426
• /
• 2003

In this paper, we implement a picture surveillance system using IBM-compatible PC with web camera. The reflex RGB data captured from WebCam is stored to HDD through USB port at every 5 seconds intervals. Also, if strangers are detected through Motion Detection routine, warning voice message is broadcasted and invasion message is transmitted by e-mail and transmit the e-mail title to mobile phone through WAP(Wireless Application Protocol) push. The detected image is stored to hard-disk in ‘month-day-hour-minute-second. jpg’ data type. And the image data is transmitted to web server through FTP(File Transfer Protocol) because invader can deletes or destroys the image data on hard-disk We implement a surveillance system which is able to utilize through internet regardless of time and space.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.9 no.4
• /
• pp.37-46
• /
• 2001

This study numerically investigates thermal comfort of a space cooled by a floor-supply air-conditioning system, in which three different combinations of supply and return locations, one floor-supply/ceiling-return and two floor-supply/floor-return, are treated. A complementary experiment is performed to validate the present numerical analysis, and the prediction agrees favorably with the measured data. In the numerical procedure, a simplified model mimicking the inlet flow through a diffuser is developed for efficient simulations. The calculated results show that the ceiling-return type is far better in terms of thermal comfort than the floor-return ones within the extent of this study, which seems to be caused by effective vertical penetration of the supply air against natural convection. It is also revealed that the arrangement of port locations in the floor-supply/floor-return system has insignificant effect on the cooling performance. For selecting a proper system, other characteristics including the heating performance should be accounted for simultaneously with the present considerations.

• International Journal of Knowledge Content Development & Technology
• /
• v.11 no.2
• /
• pp.23-36
• /
• 2021

Makerspace offers an innovative way for university libraries to render services and achieve its core objectives. However, there is low level of adoption in Nigerian university libraries, hence the need to investigate the personnel's perception towards makerspace as an innovative learning platform. To achieve this, the descriptive research design was used to elicit data with the aid of a structured questionnaire, from the 96 library personnel in John Harris Library, University of Benin. Of the 96 copies of questionnaire distributed, 68 copies were returned and analyzed using descriptive statistics. The results showed that the library personnel were familiar with makerspace even though they still require more information about it. Also, that makerspace gives students the opportunity to acquire ew skill and enhances collaboration among learners. Moreover, the study revealed that budget constraints, high cost and maintenance of equipments, erratic power supply and lack of staff training are some of the perceived challenges to makerspace implementation. Consequently, the study revealed that university libraries should strategize on how to increase allocation of funds, organize makerspace webinar for personnel, ensure stable electricity supply and create a dedicated space for makerspace in the library. In conclusion, makerspace will provide students with the technological exposure and creative abilities required for the future, and as such effective planning should be made for its deployment and sustainability in Nigerian university libraries.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.201-210
• /
• 2019

Recently, due to the efforts to mitigate traffic congestion and expansion of space efficiency, the construction of underground roads has been increased in big-scale cities. Since tunnels in the city have a higher chance for a fire leading to a great tragedy during a severe traffic jam than mountain tunnels, it is highly likely that it will be constructed as a tunnel, having a small cross section, for small vehicles. However, if they are constructed as such small-vehicle tunnels, it would be possible to reduce the design fire intensity while the concentration of harmful gases would increase due to a reduction in the small cross sectional area, led by a decrease in the tunnel height. In this study, behaviors of fire smoke by the installation interval and format of large-scale exhaust-gas ports were examined and compared in the analysis of temperatures and CO concentrations of a tunnel and its results were as the following. Although there were no significant differences in the smoke spreading distance between installation intervals, but in this study, 100 m was found to be the most effective installation interval. The smoke exhaustion performance was found to be excellent in the order of $4m{\times}3m$, $6m{\times}2m$, and $3m{\times}2m$ (2 lane) of the smoke spreading distance. Although there was no significant difference in the smoke spreading distance between formats of large-scale exhaust-gas ports, it was found that the smoke spreading distance was larger than other cases when it was $3m{\times}2m$ in the fire growing process. The analysis of smoke spreading distances by the aspect ratio showed that a smoke spreading distance was shorted when its the smoke spreading distance was found to be shorter when its traverse distance was relatively longer than its longitudinal distance.

• Journal of Navigation and Port Research
• /
• v.32 no.1
• /
• pp.47-56
• /
• 2008

With rapid growing of the Northeastern Asia, the interest for the connection of Infrastructure that was behind of interesting until now is getting larger. In a line of same connection, UN-ESCAP are forwarding transcontinental railway project, asian highway project et al.. And this study aimed at analysis on the effect that extended to a space by Korea-Japan undersea tunnel project. In aspect of a national land balanced-development to solve various problems such as overcrowding in capital region, unbalanced state by regions, weak exchange between South and North Korea, and weakness of national land basis to prepare for unification et al., this study consulted the economic potentiality model as a analysis method to examine an effect. In this analysis, I used 24 scenarios including all cases by combination of 3 scenarios for Korea-Japan undersea tunnel, 4 scenarios for transportation modes in the section of undersea tunnel, and 2 scenarios for adjacency infrastructure. Transportation modes in the section of undersea tunnel are railway, car-train, mixing way of railway and car-train, and mixing way of road and railway. Adjacency infrastructure applied railway and road. In all scenarios, Korea showed higher growth potentiality than Japan. Also, proposal plan C route relatively showed better in national land balanced-development than other proposal plans. The growth potentiality relatively appeared higher by buildup of a connection together with non-capital regions from the construction of Korea-Japan undersea tunnel. In aspect of Northeastern Asia, it resulted in a increasing of trade and chance of network formation in the region of Asia through infrastructure connection. But, in considering passenger and various factors that extended to the economic growth, this analysis have some limitation. Therefore, I hope that deep studies will continuously perform with various factors.

• Journal of Korea Port Economic Association
• /
• v.27 no.1
• /
• pp.213-234
• /
• 2011

The literature on efficiency of the maritime and shipping industry has typically focused on container ports and terminals. The study presented in this paper uses data envelopment analysis to evaluate ocean carriers based on financial and operational data from 2004 to 2007. A comparison is made up of the efficiency of global ocean carriers in efficiency of financial and operational performance respectively. A positive correlation is shown between the input and output data. In the static-efficiency analysis, we describe CCR, BCC and scale efficiency of Global Ocean Carriers in 2007. And we also provide about the stability and trend of their efficiency for four years (2004-2007) in the dynamic-efficiency analysis. The empirical results validate the necessity of restoring freight rates to facilitate the efficiency of the global ocean carriers supported by adjust of the supply of containership space. The study provides a basis for estimating the competitiveness of international shipping companies, for benchmarking best practice and for identifying the specific factors and causes of inefficiency.

• Journal of Navigation and Port Research
• /
• v.37 no.1
• /
• pp.91-100
• /
• 2013

The purpose of this study was to examine the levels of sustainability of marine sport events by types of events and thus to provide fundamental information that helps developing sustainable marine sport events. In order to accomplish such the purpose, this study employed survey methodology with a total of 285 visitors to marine sport events. Questionnaires were developed based on Tripple Bottom Line theory suggested by previous research and validated throughout a panel of experts to check out content validity. Data collected were analyzed using descriptive statistics and ANOVA with Scheffe post hoc tests. Accordingly following findings were derived from current study. First, among 12 positive sustainability variables, marine space improvement had the highest mean score(M=3.82) but creation of jobs had the lowest mean score(M=3.46). Among 11 negative sustainability variables, traffic jab had the highest mean score(M=3.16) but conflict between participants and residents had the lowest mean score(M=2.73). Second, a festival typed marine sport event had the significantly high mean scores in all positive sustainability index including economic sustainability(M=3.79), social sustainability(M=3.84) and environmental sustainability(M=3.80). Third, a business typed marine sport event had the relatively higher mean scores in all negative sustainability index including economic sustainability(M=3.22), social sustainability(M=3.26) and environmental sustainability(M=3.25). In conclusion, these findings suggest that marine sport event organizers concentrate on marine sport event with more sustainability potentials.