• Journal of Mechanical Science and Technology
• /
• v.20 no.10
• /
• pp.1626-1637
• /
• 2006

The pressure pulsation due to the gear geometry of the gerotor (generalized rotor) pump mainly occurs in an instant that the chamber of the gerotor enters the delivery port and leaves the suction one. Such a pressure pulsation may result in undesirable vibration and noise of pump components as well as cavitation in hydraulic system. Therefore, it is very important to examine the pressure characteristic of the gerotor pump at its design and analysis stages. In this paper, in order to reduce the pressure pulsation in the gerotor pump, the port plate with the relief grooves is designed by referring to as notch of vane pump and relief groove of piston pump. A series of the theoretical analyses on the pressure pulsation is performed in consideration of various design parameters of the port plate, including the installation positions of the port inlet/outlet and the groove width, and the operating conditions such as rotational velocity and delivery pressure.

• Journal of Navigation and Port Research
• /
• v.30 no.7
• /
• pp.591-598
• /
• 2006

Port development has been remarkably increasing due to the progress of industrialization in ASEAN area. Especially, Vietnam has increased the international physical distribution in this area rapidly. The main issues facing decision makers at container terminals in Vietnam are how to expand the existing container terminals and construct new container terminals. In this paper, we performed the basic design based on simulation analysis in order to support the expansion of Quy Nhon port in Vietnam as a case study. The preliminary capacity analysis was conducted on the one berth at the port to analyze the scale of C/C(Container Crane)and yard area. Alternative scenarios were created based on the preliminary capacity analysis and the detailed simulation analysis was conducted for supporting the scenarios.

• Journal of Korean Port Research
• /
• v.4 no.1
• /
• pp.59-65
• /
• 1990

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.6
• /
• pp.300-306
• /
• 2015

For an asymmetric scroll compressor for heat pump application, a numerical simulation was carried out to investigate the effects of injection port design on the compressor's performance under gas injection. To validate the simulation, the numerical results were compared with experimental results obtained from a scroll compressor with a base injection port design. There was good agreement between simulation and experimental results, with around a 1% difference in the injection mass flow rate when the injection pressure was below $12kgf/cm^2A$ for the heating mode. Various injection port angular positions were numerically tested to yield better injection performance. The largest improvement in heating capacity was obtained at angles of $240^{\circ}$ and $200^{\circ}$ inward from the scroll wrap end angle for low-temperature and standard heating conditions, respectively, while the maximum COP improvement was at $365^{\circ}$ and $280^{\circ}$, respectively. A considerable improvement in cooling capacity was also found at the injection port angle of $240^{\circ}$.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.125-131
• /
• 2005

Gate operations are very important as they are the starting point for export containers and the end point for import containers as far as checking and control exercised by terminal operators are concerned. The objective of this paper is to propose the design of separated gate system in order to reduce the truck turnaround time and to distribute the truck traffic volume in port container terminal. Because of a lot of container load and unload within short term, many trucks have to pass the gate at a time. This study suggests the separated gate system as an efficient design for gate operation considering integration of two individual berth.

• Journal of Distribution Science
• /
• v.14 no.1
• /
• pp.29-38
• /
• 2016

Purpose - The purpose of paper is to review and look into the process of port development of each country, and compare with their system of port management. Research design, data and methodology - The methods to be taken is to examine a process of port development in terms of historic and regulated point of views, and each country's port is compared with various port models. Results - China has evolved of port governance into 3 stages, which has lead to almost liberalized port management system in process of privatization slogan. Japan has three stages of port development, and key commitments have been done by local government, rather than national one. Korea has also several stages of port reforms, and national government has been deeply involved in port industry, as well as regional government and port authority in certain areas. Conclusions - whatever port management system each countries has taken, it eventually aims to port productivity in country's port. To adopt most proper port management system may be answer for country to cope with environmental changes around port industry.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.6 s.113
• /
• pp.127-139
• /
• 2006

Mt. Yokmang landscape design awarded first in [North container terminal site furtherance construction in Busan new port], design competition sponsoring in the Korea Container Terminal Authority in 2005. Design guideline was to propose the symbol of new port and to establish landscape plan in consideration of view and geological location. Because landscape plan required establishment of restoration plan for cutting slope, Mt. Yokmang became the major object. The purpose of planning are as follows. The first purpose is to minimize existent natural environment damage, and the second, to connect with ambit and create new image. The third is to provide place of rest and interchange for local resident. Reflecting stratum structure and landscape characteristics, cutting slope consisted of [utilization slope], [presentation slope], [landscape slope], and [ecological slope]. Vegetation design applied ecological restoration method through restoration of stratum, and eve environment-friendly afforestation, planned program that can connect area with existing ecosystem. In process that decides form of the cutting slope, analyze view structure and visual exposure in various access routes, sensitivity etc. was accomplished. Also, symbolic tower(Ocean Polaris) that presents in architecture and landscaping features, night landscape planning could gain synergy effect by keeping consistence with landscape and ecological planning. Passing through final design and construction process, I expect that the Mt. Yokmang will be a new landmark in Busan new port.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.276-281
• /
• 1989

Comparison 3-port servo system with 4-port is made to obtain optimal design for heavy and unidirectional hydraulic system, It is concluded that 3-port servo system it more adequate than 4-port for the heavy load system which is usually operated at lower frequencies. High performance electro-hydraulic position controller is designed using 3-port servo valve. It includes dynamic pressure feedback as a inner loop and position feedback as a outer loop.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.317-323
• /
• 2006

This paper deals with High Stacking System(HSS) development to develop a next generation port handling system for accommodating mega-sized container ships. It aims to develop the HSS that maximizes handling capacity within the limited space of the port. The system is expected to resolve the problem of yard space shortage as well as utilize innovative technology to ensure high-performance and automation at the terminal so as to enhance stevedoring productivity. The main objectives of this paper is suggesting the design concept drawing the HSS terminal and simulation analysis was undertaken taking into consideration performance of handling equipment, and port handling system Design concept drawing of the HSS terminal and will be used as base data for basic design and detailed design in actual operations of the terminal in the future. The HSS, to be applied to both conventional and new terminals, is expected to act as a catalyst for enhancing the value-added at ports.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.193-202
• /
• 2006

Port development is remarkable increased due to the progress of industrialization in ASEAN area. Especially, Vietnam has increased the international physical distribution in this area rapidly. The main issues facing decision makers at container terminals in Vietnam are how to expand the existing container terminals and construct new container terminals. In this paper, we performed the basic design based on simulation analysis in order to support the expansion of Quy Nhon port in Vietnam as a case study. The preliminary capacity analysis was conducted on the one berth at the port to analyze the scale of C/C and yard area. Alternative scenarios were created based on the preliminary capacity analysis and the detailed simulation analysis was conducted fur the scenarios. And in order to establish the marketing strategy, we classified the marketing elements by industrial environment and performed SWAT analysis of the port.