• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.203-208
• /
• 2004

The objective of this study is to analyze the efficiency of marshalling work using ATC(automated transfer crane) for ACT(automated container terminal). It is important fact to assignment of containers, because the character of ACT which block layout is vertical for berth and there are four other works which are inbound, oubound, loading and unloading in one block. And then there is need which assignment of containers with remarshaling work using ATCs in one block. Therefore, we analyze the efficiency of remarshaling work using simulation and suggest the assignment methodology of containers in yard

• Journal of Navigation and Port Research
• /
• v.35 no.1
• /
• pp.71-76
• /
• 2011

Recently, container terminal managers make an experiment on the double cycle and dual cycle operation, which ship loading and unloading were carried out simultaneously, for increasing the productivity of quay side. If, however, we make an experiment on dual cycle operation in a real job site, the efficiency is poor up to terminal operation method as YTs(Yard Tractors)' allocation method, QCs(Quay Cranes)' working speed, and position of export containers. Especially, using the existing yard operation method, it is difficult to support to dual and double cycle operation. Therefore, this paper examine more efficient terminal operation method, when terminal uses dual cycle operation. We developed a simulation model using simulation analysis software, Arena.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10a
• /
• pp.107-115
• /
• 1998

For the purpose of building the simulation model on cargo handling capacity of container terminal, we composed a model of container logistics system which has a 4 subsystems ; cargo handling, transportation, storage system and Gate complex system. Several date used in simulation gained through spot research and basic statistic analysis using raw data from January to Jane in 1998. The results of this study are as follows ; First, average available ratio of each subsystem was G/C 50%, Y/T 57.5%, storage system 56%, Gate complex 50%, and there was no subsystem occurring specific bottleneck. Second, comparing the results of simulation to the results of basic statistics, we can verify suitability of this simulation model. Third, Comparing the results of this study to the results of existed study, we were able to confirm a change of BCTOC container logistics system under IMF situation.

• Journal of Korean Port Research
• /
• v.12 no.2
• /
• pp.251-260
• /
• 1998

For the purpose of building the simulation model on cargo handling capacity in container terminal we composed a model of container logistics system which has a 4 subsystem; cargo handling transportation storage and gate complex system. Several data are used in simulation which were gained through a field study and a basic statistic analysis of raw data on BCTOC from January to Jane in 1998. The results of this study are as follows; First average available ratios of each subsystems were 50% for G/C, 57.5% for Y/T, 56% for storage system and 50% for gate complex. And there were no subsystems occurring specific bottleneck. Second comparing the results of simulation to the results of basic statistics analysis we can verifying the suitability of this simulation model. Third comparing the results of this study to the results of existed similar study in 1996, we were able to confirm the changes of container logistics system in BCTOC.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.1
• /
• pp.1-11
• /
• 1997

Because of the sharp increase of its export and import container cargo volumes contrast to the lack of related Container Terminal facility, equipment and inefficient procedure, there is now heavy container cargo congestions in Pusan Container Terminal. As a result of such a situation, many container ships avoid their calls into Pusan port. This is a major cause that in tum kads to weakening intemational competitiveness of the Korean industry. This study, therefore, aims are to make a quantitative analysis of Container Terminal System through the computer simulation, especially focusing on its 4 sub-system of a handling system, 'it is checked whether the current operation is being performed effectively through the computer simulation. The overall findings are as folIows; Firstly, average tonnage of the ships visiting the BCTOC was 32,360 G/T in from January '96, to may '96. The average arrival interval and service time of container ships at BCTOC are 5.63 hours and 18.67 hours respectively. Ship's arrival and service pattern at BCTOC was exponential distribution with 95% confidence and Erlang-4 distribution with 99% confidence. Secondly, average waiting time and number of ships was 9.9 hours, 235 ships(38%) among 620 ships. Number of stevedoring container per ship was average 747.7 TED, standard deviation 379.1 TEU and normal distribution with 99% confidence. Thirdly, from the fact that the average storage days of containers at BCTOC are 2.75 days (3.0 days when import, 2.5 days when export). it is founds that most containers were transfered to the off-dock storage areas with the free periods(5 days when import, 4 days when export), the reason for which is considered to be the insufficient storage area at BCTOC. Fourthly, in the case of gate in-out at BCTOC, occupied containers and emptied containers are 89% and 11% respectively in the gate-in, 75% and 25% seperately in the gate-out. Finally, from the quantitative analysis results for container terminal at BCTOC, ship's average wating time of ships was found to be 20.77 hours and berth occupancy rate(${\rho}$) was 0.83. 5~6 berths were required in order that the berth occupancy rate(${\rho}$) may be maintained up to 60% degree.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.339-344
• /
• 2006

The productivity for container hand1ing in container ship is a important role in container terminal, and it is mainly depended on the productivity of gantry crane. From the failure of gantry crane, the crane will be stopped until the repair of the failure. During the repair, the loading and/or discharging for container ship is suspended, and the productivities of the container ship and the yard is just hold. Thus, the prevention maintenance is importance to make a keep the steady state condition for all equipments in container terminal. In this paper, we deal with a optimal determination method of prevention maintenance interval for gantry crane systems. For verification, we will make a productivity of gantry crane and adapt to total container handling in each ship by simulation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.471-477
• /
• 2004

In this study, we introduce a 3-dimensional simulation to support the Design on ACT(Automated Container Terminal). This simulation system developed to simulate virtual operations of ACT using 3-dimensional simulation and animate the simulated results with real time. And the developed system applied an object-oriented design and C++ programming to increase the reusability and extensibility. We select several items of performance evaluation for objects used in ACT in terms of problem detection, problem forecast, and logic feasibility, and provide evaluation points for the design of ACT.

• Journal of Korea Port Economic Association
• /
• v.27 no.1
• /
• pp.95-109
• /
• 2011

The aim of this study is to analyze the container terminal operation by considering the key factors that fluctuates the container traffic volume using the System Dynamics (SD) method. The target area of this study is the 'A' container terminal which is located in the Port of Incheon and the simulation period is from 2004 to 2020. As evaluation indexes for container terminal operation, three factors such as 'total sales', 'operating ratio of C/Y' and 'operating ratio of G/C' are selected, and as for the key factors of fluctuating container traffic volume, 'variation ratio of world trade', 'variation ratio of trade among three countries in North-East Asia' and 'variation ratio of won-dollar rate are used. As of 2020, the result of this study is that import-export container traffic volume increases almost 880,000TEU and total sales and operating ratio of G/C each reach 7.1 bilion won and 65 percent. No changes however in loadage and operating ratio of C/Y in 'A' container terminal are indicated. The reason is that capability of C/Y is exceeded. Therefore this study suggest that decision-makers of 'A' container terminal realize the importance of additional space of C/Y.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.331-337
• /
• 2009

Container crane is main equipment in container terminals and it determines the productivity and the efficiency of container terminals. The typical type of container cranes has the single trolley and one among advanced types of them has the dual trolley. The objective of this paper is to analyze the buffer size of a container crane with the dual trolley in container terminals. We present a simulation model for analysing the buffer space of a container crane with the dual trolley. The buffer space is located between main trolley in sea-side and second trolley in yard-side. We performs various simulation experiments and analyze the buffer size to estimate the required productivity.

• Journal of Navigation and Port Research
• /
• v.30 no.3 s.109
• /
• pp.235-240
• /
• 2006

This study analyzed equipment operation strategy of ATC(Automated Transfer Crane) in order to development efficiency ATC operation logic for apply to domestic ACT(Automated Container Terminal). Improving productivity of ACT developed dynamic operation logic and established dispatching rule. As a result of simulation experiment reduced waiting time and interference time of ATC. Thus, we can improve productivity of ACT using dynamic operation logic and interference avoidance strategy.