• Journal of Korea Port Economic Association
• /
• v.33 no.2
• /
• pp.53-82
• /
• 2017

The purpose of this study is to show the clustering trend and compare empirical results, as well as to choose the clustering ports for 3 Korean ports (Busan, Incheon, and Gwangyang) by using meta-frontier DEA (Data Envelopment Analysis) and integer models on 38 Asian container ports over the period 2005-2014. The models consider 4 input variables (birth length, depth, total area, and number of cranes) and 1 output variable (container TEU). The main empirical results of the study are as follows. First, the meta-frontier DEA for Chinese seaports identifies as most efficient ports (in decreasing order) Shanghai, Hongkong, Ningbo, Qingdao, and Guangzhou, while efficient Korean seaports are Busan, Incheon, and Gwangyang. Second, the clustering results of the integer model show that the Busan port should cluster with Dubai, Hongkong, Shanghai, Guangzhou, Ningbo, Qingdao, Singapore, and Kaosiung, while Incheon and Gwangyang should cluster with Shahid Rajaee, Haifa, Khor Fakkan, Tanjung Perak, Osaka, Keelong, and Bangkok ports. Third, clustering through the integer model sharply increases the group efficiency of Incheon (401.84%) and Gwangyang (354.25%), but not that of the Busan port. Fourth, the efficiency ranking comparison between the two models before and after the clustering using the Wilcoxon signed-rank test is matched with the average level of group efficiency (57.88 %) and the technology gap ratio (80.93%). The policy implication of this study is that Korean port policy planners should employ meta-frontier DEA, as well as integer models when clustering is needed among Asian container ports for enhancing the efficiency. In addition Korean seaport managers and port authorities should introduce port development and management plans accounting for the reference and clustered seaports after careful analysis.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.306-313
• /
• 2021

National fishing harbour is as a refuge for fishing boats and a breakwater lighthouse is installed as a functional facility in consideration of harbour identification and the safety of passing vessels. In this study, the service level of breakwater lighthouse (234 units) was estimated based on the traffic volume of 105 national fishing harbour. For this purpose, the evaluation items were determined, the fishing harbour standard index was calculated (Fs=1), the proximity of fishing harbour was identified and the function (service level) of the breakwater lighthouse was estimated in the following order. However, national fishing harbour differed in size, traffic volume and fishing vessel capacity. Therefore, 105 national fishing harbour were divided into three groups through cluster analysis. The cluster analysis was based on the service level factors of the breakwater lighthouse, such as the number of weeding fishing vessels, tonnage of fishing vessels, the number of incoming and outgoing vessels per year, and fishing vessel capacity. As a result of the estimation, the service level of the breakwater lighthouse (light tower height, visual height, visual range, interval) was 10.50m, 16.50m, 7.00mile, 5.5sec for group 1, and 10.67m, 16.16m, 8.33mile, and 6.0sec for group 2, The three groups are 11.53m, 16.75m, 6.75mile and 5.0sec. The results of this study can be used as useful basic data for improving the service level of traffic vessels when a breakwater lighthouse is built in a fishing harbour in the future.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.181-182
• /
• 2015

Lately, the importance of the marin industry is growing as current status and future trend. This change is being prompted for the development of the maritime industry such as resource depletion, climate change, the Arctic opens. The demand of new marine industry with IT and convergence is gradually increasing. A new understanding of the importance of the marine industry is needed. Therefore, the systematic classification system for the marin industry building for the marin industry is to assess the marine industry activity levels at the national level.

• Journal of Korea Port Economic Association
• /
• v.34 no.2
• /
• pp.1-16
• /
• 2018

Maritime industry is recognized as a new value-adding and growth engine industry. It provides high value by creating clusters centering on ports. Advanced international ports are also clashing ahead to create clusters, boost profits, and strengthen competitiveness. The Korean government enacted policies for the establishment and upbringing of maritime industrial clusters in 2015. It is very important to understand which maritime industry has a comparative advantage in each region and to establish an integration strategy through maritime industrial clusters. This study analyzes the structure of the maritime industry in the Chungnam province, which is expected to deal with raw materials(mainly oil products), container throughput, and opening of ferry route with China's port. The study analyzed the existing literature on the maritime industry and classified the industry into 5 major categories, 21 sub-categories, and 84 sub-categories in shipping and logistics, shipbuilding, fishery, marine tourism industry, and other industries. Based on the reclassified maritime industry, the structure of the maritime industry in the Chungnam province was analyzed by using location quotient(LQ) and Shift-Share analysis. The study found that the fisheries industry showed the highest value(1.718) in the analysis of LQ, followed by the marine tourism industry(1.092), shipbuilding industry(0.823) and shipping and logistics industry(0.789). The total effect of the maritime industry in Chungnam province was 36,315 and the net growth effect, excluding the national growth effect, was estimated to be 21,321. Based on these results, we classify the maritime industry in the Chungnam province as comparative advantage and comparative disadvantage. The results of this study can be used as basic data for formulating strategies for the construction of the maritime industry cluster in the Chungnam province in the future.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.1
• /
• pp.50-56
• /
• 2011

To make conservative port and coast ecosystems and creative the greenspace, We were investigated with characteristic of flora, environmental factors, types of port, adaptive species, minimum conservation area and plantation model. In 50 sites of study areas, there are 19 families and 174 species of vascular plants and 19 families and 48 species of halophytes. Dominant communities in port ecosystem contains Carex kobomugi community, Elymus mollis community, Carex pumila community, Ixeris repens community, Vitex rutundifolia community, Calystegia soldandlla community, Rosa rugosa community, Lathyrus japonica community, Salsola komarovi community, Cynodon dactylon community, Tetragonia tetragonioides community, Suaeda japonica community, Suaeda maritima community, Zoysia sinica community and Phragmites communis community. We carried out Canonical Correspondence Analysis(CCA) for ordinations on the vegetation and plant communities-environmental variable matrices in 50 sites. The communities tended to cluster into three types: Clay marsh, Sand marsh, Sand gravel marsh types. Adaptive species in habitate types are selected that sand marsh-type communities in ports contained Elymus mollis community, Ixeris repens community, Carex kobomugi community, Carex pumila community, Clay marsh-type communities contained Suaeda japonica community, Phragmites communis community, Zoysia sinica community and Suaeda maritima community, Sand gravel marsh-type communities contained Vitex rutundifolia community, Calystegia soldandlla community. We are conducted the estimation of minimal area for plantation of adaptive plant species and carried out guide line and plantation model for creation of green space in port ecosystem.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.5 s.54
• /
• pp.32-38
• /
• 2003

This study investigates the distribution characteristics and relationship of water quality, and analyzes the spatial and temporal variation and distribution of the pollutant loads at Yeong-il Bay. The results of these analysis, the concentrations of nutrient loads (T-N and T-P), both appeared to be at the maximum value in November, while most small values were taken in May for the T-N, and in August for the T-P. For COD, the maximum concentration was in August, which has much precipitation during the same season, T-N was at the mean, and T-P was at the minimum value. Using the cluster analysis to develop the division of the sea basin by the dendrogram, before and after construction of Pohang New-port, the variation characteristics of water quality of Yeong-il Bay were discussed. The in flowing pollutant loads were transported to the landward by the high-density salinity water volume of the bottom layer therefore, it formed nutrient trap or coastal trapping areas of the pollutant load. By this mechanism, it is clear that the water volume with high-density nutrient exists on both sides of the Pohang New-port. Thus, the sea basins increasing concentration of the pollutant load at Yeong-il Bay are most prevalent at Hyeong-san estuary, the Pohang Old, and New-port. To improve water quality of this sea basin, the reduction of these nutrients loads should be the highest priority.

• Journal of Venture Innovation
• /
• v.5 no.1
• /
• pp.107-127
• /
• 2022

Global challenges such as the corona pandemic, climate change and the war-on-tech ensure that the demand who the technologies of the future develops and monitors prominently for will be on the agenda. Development of, and applications in, agrifood, biotech, high-tech, medtech, quantum, AI and photonics are the basis of the future earning capacity of the Netherlands and contribute to solving societal challenges, close to home and worldwide. To be like the Netherlands and Europe a strategic position in the to obtain knowledge and innovation chain, and with it our autonomy in relation to from China and the United States insurance, clear choices are needed. Brainport Eindhoven: Building on Philips' knowledge base, there is create an innovative ecosystem where more than 7,000 companies in the High-tech Systems & Materials (HTSM) collaborate on new technologies, future earning potential and international value chains. Nearly 20,000 private R&D employees work in 5 regional high-end campuses and for companies such as ASML, NXP, DAF, Prodrive Technologies, Lightyear and many others. Brainport Eindhoven has a internationally leading position in the field of system engineering, semicon, micro and nanoelectronics, AI, integrated photonics and additive manufacturing. What is being developed in Brainport leads to the growth of the manufacturing industry far beyond the region thanks to chain cooperation between large companies and SMEs. South-Holland: The South Holland ecosystem includes companies as KPN, Shell, DSM and Janssen Pharmaceutical, large and innovative SMEs and leading educational and knowledge institutions that have more than Invest €3.3 billion in R&D. Bearing Cores are formed by the top campuses of Leiden and Delft, good for more than 40,000 innovative jobs, the port-industrial complex (logistics & energy), the manufacturing industry cluster on maritime and aerospace and the horticultural cluster in the Westland. South Holland trains thematically key technologies such as biotech, quantum technology and AI. Twente: The green, technological top region of Twente has a long tradition of collaboration in triple helix bandage. Technological innovations from Twente offer worldwide solutions for the large social issues. Work is in progress to key technologies such as AI, photonics, robotics and nanotechnology. New technology is applied in sectors such as medtech, the manufacturing industry, agriculture and circular value chains, such as textiles and construction. Being for Twente start-ups and SMEs of great importance to the jobs of tomorrow. Connect these companies technology from Twente with knowledge regions and OEMs, at home and abroad. Wageningen in FoodValley: Wageningen Campus is a global agri-food magnet for startups and corporates by the national accelerator StartLife and student incubator StartHub. FoodvalleyNL also connects with an ambitious 2030 programme, the versatile ecosystem regional, national and international - including through the WEF European food innovation hub. The campus offers guests and the 3,000 private R&D put in an interesting programming science, innovation and social dialogue around the challenges in agro production, food processing, biobased/circular, climate and biodiversity. The Netherlands succeeded in industrializing in logistics countries, but it is striving for sustainable growth by creating an innovative ecosystem through a regional industry-academic research model. In particular, the Brainport Cluster, centered on the high-tech industry, pursues regional innovation and is opening a new horizon for existing industry-academic models. Brainport is a state-of-the-art forward base that leads the innovation ecosystem of Dutch manufacturing. The history of ports in the Netherlands is transforming from a logistics-oriented port symbolized by Rotterdam into a "port of digital knowledge" centered on Brainport. On the basis of this, it can be seen that the industry-academic cluster model linking the central government's vision to create an innovative ecosystem and the specialized industry in the region serves as the biggest stepping stone. The Netherlands' innovation policy is expected to be more faithful to its role as Europe's "digital gateway" through regional development centered on the innovation cluster ecosystem and investment in job creation and new industries.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.14 no.4
• /
• pp.17-23
• /
• 2006

This paper describes the preliminary design procedure for the hybrid propulsion system. For a given mission defined by velocity increment, the design of a polyethylene/LOX hybrid rocket was implemented. In addition, Seven-cluster multi-port fuel-grain was considered. After determining the system size including the combustion chamber, the performance parameters such as specific impulse, thrust, characteristic velocity, and thrust coefficient can be predicted by using empirical regression rate correlation, though most of preliminary design code assume constant regression rate. The results of the performance prediction indicated that besides the widely used HTPB/LOX, polyethylene/LOX hybrid motor can be a viable alternative to the more widely used SRMs.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.1-9
• /
• 2017

Recently, the active research into wireless sensor networks has led to the development of sensor nodes with improved performance, including their mobility and location awareness. One of the most important goals of such sensor networks is to transmit the data generated by mobile sensors nodes. Since these sensor nodes move in the mobile wireless sensor networks (MWSNs), the energy consumption required for them to transmit the sensed data to the fixed sink is increased. In order to solve this problem, the use of mobile sinks to collect the data while moving inside the network is studied herein. The important issues are the mobility and energy consumption in MWSNs. Because of the sensor nodes' limited energy, their energy consumption for data transmission affects the lifetime of the network. In this paper, a mobile-sink based energy-efficient clustering scheme is proposed for use in mobile wireless sensor networks (MECMs). The proposed scheme improves the energy efficiency when selecting a new cluster head according to the mobility of the mobile sensor nodes. In order to take into consideration the mobility problem, this method divides the entire network into several cluster groups based on mobile sinks, thereby decreasing the overall energy consumption. Through both analysis and simulation, it was shown that the proposed MECM is better than previous clustering methods in mobile sensor networks from the viewpoint of the network energy efficiency.

• Journal of Korea Port Economic Association
• /
• v.34 no.3
• /
• pp.17-52
• /
• 2018

The purpose of this paper is to measure the clustering change and analyze empirical results. Additionally, by using k-means, hierarchical, and mixed models on Asian container ports over the period 2006-2015, the study aims to form a cluster comprising Busan, Incheon, and Gwangyang ports. The models consider the number of cranes, depth, birth length, and total area as inputs and container twenty-foot equivalent units(TEU) as output. Following are the main empirical results. First, ranking order according to the increasing ratio during the 10 years analysis shows that the value for average linkage(AL), mixed ward, rule of thumb(RT)& elbow, ward, and mixed AL are 42.04% up, 35.01% up, 30.47%up, and 23.65% up, respectively. Second, according to the RT and elbow models, the three Korean ports can be clustered with Asian ports in the following manner: Busan Port(Hong Kong, Guangzhou, Qingdao, and Singapore), Incheon Port(Tokyo, Nagoya, Osaka, Manila, and Bangkok), and Gwangyang Port(Gungzhou, Ningbo, Qingdao, and Kasiung). Third, optimal clustering numbers are as follows: AL(6), Mixed Ward(5), RT&elbow(4), Ward(5), and Mixed AL(6). Fourth, empirical clustering results match with those of questionnaire-Busan Port(80%), Incheon Port(17%), and Gwangyang Port(50%). The policy implication is that related parties of Korean seaports should introduce port improvement plans like the benchmarking of clustered seaports.