• 제목/요약/키워드: Porous thin film

검색결과 200건 처리시간 0.027초

PDMS (Polydimethylsilioxane)-Coated Silica Nanoparticles for Selective Removal of Oil and Organic Compound from Water

  • Cho, Youn Kyoung;Kim, Dae Han;Yoon, Hye Soo;Jeong, Bora;Kim, Young Dok
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
    • /
    • pp.257-257
    • /
    • 2013
  • In order to selectively remove oil and organic compound from water, silica nanoparticles with hydrophobic coating was used. Since silica nanoparticles are generally hydrophilic, removal efficiency of oil and organic compound, such as toluene, in water can be decreased due to competitive adsorption with water. In order to increase the removal efficiency of oil and toluene, hydrophobic polydimethylsiloxane (PDMS) was coated on silica nanoparticles in the form of thin film. Hydrophobic property of the PDMS-coated silica nanoparticles and hydrophilic silica nanoparticles were easily confirmed by putting it in the water, hydrophilic particle sinks but hydrophobic particle floats. PDMS coated silica nanoparticles were dispersed on a slide glass with epoxy glue on and the water contact angle on the surface was determined to be over $150^{\circ}$, which is called superhydrophobic. FT-IR spectroscopy was used to check the functional group on silica nanoparticle surface before and after PDMS coating. Then, PDMS coated silica nanoparticles were used to selectively remove oil and toluene from water, respectively. It was demonstrated that PDMS coated nanoaprticles selectively aggregates with oil and toluene in the water and floats in the form of gel and this gel remained floating over 7 days. Furthermore, column filled with hydrophobic PDMS coated silica nanoparticles and hydrophilic porous silica was prepared and tested for simultaneous removal of water-soluble and organic pollutant from water. PDMS coated silica nanoparticles have strong resistibility for water and has affinity for oil and organic compound removal. Therefore PDMS-coated silica nanoparticles can be applied in separating oil or organic solvents from water.

  • PDF

친수성 PEGDA 하이드로젤 지지체 기반 FO 분리막의 제조 (Fabrication of Hydrophilic PEGDA Hydrogel-supported Forward Osmosis Membranes)

  • 김달용;박성준;이정현
    • 멤브레인
    • /
    • 제33권6호
    • /
    • pp.383-389
    • /
    • 2023
  • 폴리에틸렌 글라이콜 다이아크릴레이트 (polyethylene glycol diacrylate, PEGDA) 하이드로젤을 정삼투 (forward osmosis, FO) 분리막의 지지체로 사용하여 고성능의 FO 분리막을 제조하였다. 친수성의 PEGDA를 자외선 조사를 통한 중합과 그에 따른 상분리를 이용하여 다공성으로 구조화하였고, 매우 높은 친수성을 가진 하이드로젤 지지체를 얻을 수 있었다. 제조된 친수성 PEGDA 지지체 위에 높은 수투과도와 염 선택도를 확보하기 위해서 일반적인 계면중합 방식이 아닌 톨루엔을 유기 용매로 사용한 계면중합 방식(TIP)으로 선택층을 도입하였다. 제조된 PEGDA 지지체 기반 분리막은 1.0 M NaCl 유도 용액과 증류수 유입수를 통한 FO 성능 측정에서 상용 HTI 분리막들에 비해서 매우 높은 수투과도와 낮은 염 선택도를 나타내었다. 본 연구를 통해, 기존의 소수성 지지체를 추가적으로 개질하는 방식이 아닌 새로운 물질과 제조방식을 사용한 FO 지지체의 가능성을 제시하고자 한다.

NAPL-물 계면에서 Langmuir형 흡착특성을 보이는 계면추적자(CPC)의 다공성 균질매질내 유동특성 (Transport behavior of a surfactant tracer(CPC) with Langmuir type adsorption isotherm on NAPL-water interface in a homogeneous porous medium)

  • 김헌기;문희수;이상훈
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제6권2호
    • /
    • pp.3-13
    • /
    • 2001
  • 피흡착체에 대하여 곡선형 흡착등온곡선을 가지는 흡착체가 토양내 수용액상에서 이동할 때 직선형 흡착등온곡선을 가지는 흡착체와 다른 유동특성을 보인다는 사실은 널리 알려져 있다. 그러나 실험적으로 이와 같은 특성이 정밀하게 연구된 바는 그리 많지 않으며 특히 NAPLS(Non-Aqueous Phase Liquids)로서 오염된 지역의 NAPLs의 양과 미시적인 분포를 알아내기 위하여 사용되는 수리지질학적 추적자 기법에 대하여는 거의 실험된 바가 없다. 본 연구는 NAPL과 수용액간의 비계면적을 측정하기 위하여 사용되는 양이온계 계면활성제 (계면추적자), cetylpyridinium chloride (CPC)가 미세한 유리구슬로 충진된 스테인레스 컬럼내부를 통과하며 보이는 파과특성을 분석하였다. 유리구슬의 평균직경은 110$\mu\textrm{m}$였으며, 구슬의 표면은 n-decane의 얇은 막으로서 도포되어 있다. CPC는 유동하며 n-decane과 수용액의 계면에 흡착하게 되며, 실험결과 전형적인 Langmuir type의 흡착 특성을 보이는 것으로 나타났다. 앞부분과 뒷부분의 파과곡선은 각기 현저히 다른 양상을 보이며 이는 흡착등온곡선의 비직선적인 성격때문인 것으로 풀이된다. 또한 CPC의 지체상수는 CPC의 농도와 밀접한 함수관계가 있는 것으로 풀이된다. 또한 CPC의 지체상수는 CPC의 농도와 밀접한 함수관계가 있는 것으로 밝혀졌다. 컬럼에 투입되는 CPC가 pulse input일 때의 지체상수는 pulse input의 파과곡선상 나타나는 최대농도를 input농도로서 사용한 step input시의 지체상수와 일치하였다. 이 결과는 수리지질학적 특성치를 알아내기 위하여 최근 들어 활발히 개발되고 있는 추적자 기법을 적용하는데 있어서 일반적으로 통용되는 가정을 실험적으로 증명하였다는 데 그 의의가 있다.

  • PDF

원자층 증착을 이용한 친환경 소재의 제조 (Fabrication of Environmental-friendly Materials Using Atomic Layer Deposition)

  • 김영독
    • 공업화학
    • /
    • 제23권1호
    • /
    • pp.1-7
    • /
    • 2012
  • 본 총론에서는 원자층 증착을 이용한 친환경 소재의 개발에 대한 최근 연구 결과들을 간단하게 소개하려 한다. 원자층 증착의 장점은 박막의 두께를 미세하게 조절할 수 있다는 것과, 3차원적으로 복잡한 구조를 가지는 담체의 형상을 유지하면서 균일한 박막을 제조할 수 있다는 것이다. 이러한 원자층 증착의 장점은 친환경소재를 제조하는 데 중요한 역할을 할 수 있다. Anodic aluminum oxide (AAO)와 같은 다공성 membrane을 담체로 이용하여, 다공성 구조는 그대로 유지하면서 10나노미터 정도의 $TiO_2$박막을 균일하게 증착할 경우 톨루엔 등의 휘발성 유기물 필터로 사용할 수 있는데, 이는 AAO의 특이한 기하학적 구조와 비정질 $TiO_2$의 강한 휘발성 유기물 흡착력의 조합에 의한 결과이다. 톨루엔 분해용 광촉매 및 이산화탄소 개질 반응에 의한 수소 생산 촉매 반응에 있어서도 나노다이아몬드나 니켈 담체 위에 $TiO_2$의 증착량을 미세하게 조절하여 $TiO_2$가 표면을 완전히 덮지 않고 부분적으로만 덮고 있는 구조를 만들 경우 촉매의 효율 및 수명을 극대화할 수 있게 된다. 이러한 예들은 원자층 증착이 기존의 반도체산업뿐만 아니라 환경소재의 개발에도 중요한 도구가 될 수 있음을 의미한다.

Nanophase Catalyst Layer for Direct Methanol Fuel Cells

  • Chang Hyuk;Kim Jirae
    • 전기화학회지
    • /
    • 제4권4호
    • /
    • pp.172-175
    • /
    • 2001
  • 마그네트론 스퍼터링 방법에 의하여 Nanophase 촉매층을 형성하여 Direct Methanol Fuel Cell(DMFC)에 적용하였다. 일반적인 박막 증착 방법보다 높은 압력 (Ar/He혼합기체)에서 금속 Target과 탄소 Target을 동시에 스퍼터링하여 내피온막 위에 직접 코팅함으로써 기공성 있는 PtRu혹은 Pt및 탄소입자를 포함한 새로운 구조의 촉매층을 형성하였다. 본 방법에 의하여 $1.5mg/cm^2$의 PtRu(Anode) 및 $1mg/cm^2$ Pt(Cathode) 로딩으로 2M Methanol, 1 Bar공기, $80^{\circ}C$조건에서 $45mW/cm^2$의 출력을 얻을 수 있었으며, 이는 기존의 상용방법에 의하여 제조된 전극보다 같은 조건에서 $30\%$의 성능향상을 제시한 것이다. 이는 Nanophase촉매층 구조로 인하여 초미세 분말을 적용하였고, 많은 량의 원자들이 입계에 배열하게 됨으로써 촉매반응을 원활하게 하고,연료의 공급을 효율적으로 해준 것에 기안한 것으로 판단된다. 그러므로, 본 연구의 결과를 응용할 경우 DMFC를 휴대용 전자기기에 적용함에 있어서 성능향상 및 가격경쟁력 확보에 도움을 줄 것으로 기대된다.

Effect of Support of Two-Dimensional Pt Nanoparticles/Titania on Catalytic Activity of CO Oxidation

  • Qadir, Kamran;Kim, Sang-Hoon;Kim, S.M.;Reddy, A.S.;Jin, S.;Ha, H.;Park, Jeong-Y.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.246-246
    • /
    • 2012
  • Smart catalyst design though novel catalyst preparation methods can improve catalytic activity of transition metals on reducible oxide supports such as titania by enhancement of metal oxide interface effects. In this work, we investigated Pt nanoparticles/titania catalysts under CO oxidation reaction by using novel preparation methods in order to enhance its catalytic activity by optimizing metal oxide interface. Arc plasma deposition (APD) and metal impregnation techniques are employed to achieve Pt metal deposition on titania supports which are prepared by multi-target sputtering and Sol-gel techniques. In order to tailor metal-support interface for catalytic CO oxidation reaction, Pt nanoparticles and thin films are deposited in varying surface coverages on sputtered titania films using APD. To assess the role of oxide support at the interface, APD-Pt is deposited on sputtered and Sol-gel prepared titania films. Lastly, characteristics of APD-Pt process are compared with Pt impregnation technique. Our results show that activity of Pt nanoparticles is improved when supported over Sol-Gel prepared titania than sputtered titania film. It is suggested that this enhanced activity can be partly ascribed to a very rough titania surface with the higher free metal surface area and higher number of sites at the interface between the metal and the support. Also, APD-Pt shows superior catalytic activity under CO oxidation as compared to Pt impregnation on sputtered titania support. XPS results show that bulk oxide is formed on Pt when deposited through impregnation and has higher proportion of oxidized Pt in the form of $Pt^{2+/4+}$ oxidation states than Pt metal. APD-Pt shows, however, mild oxidation with large proportion of active Pt metal. APD-Pt also shows trend of increasing CO oxidation activity with number of shots. The activity continues to increase with surface coverage beyond 100%, thus suggesting a very rough and porous Pt films with higher active surface metal sites due to an increased surface area available for the reactant CO and $O_2$ molecules. The results suggest a novel approach for systematic investigation into metal oxide interface by rational catalysts design which can be extended to other metal-support systems in the future.

  • PDF

페놀수지/알루미나 복합 활성탄소중공사막을 이용한 응축성 기체 분리 (Condensable Gas Separation using Phenol! Alumina Composite Activated Carbon Hollow Fiber Membranes)

  • 신경용;박유인;김범석;구기갑
    • 멤브레인
    • /
    • 제20권4호
    • /
    • pp.312-319
    • /
    • 2010
  • 탄소막은 고분자막에 비해 높은 선택성과 투과성, 열적, 화학적 안정성을 가지고 있어 기체 분리, 특히 휘발성 유기화합물(VOCs) 분리막으로 많은 관심을 받고 있다. 활성탄소중공사막은 기공 표면(pore wall)에 형성된 흡착성 미세기공에 의해 선택적으로 응축성 성분이 흡착, 확산되는 흡착-확산 기구에 의해 흡착성-비흡착성 물질이 분리된다. 본 연구에서는 다공성 알루미나 중공사막 지지체에 phenolic resin (novolac type)을 코팅한 후 산화, 탄화 및 활성화 등의 열분해 과정을 통해 막 표면과 기공 표변에 흡착성 미세기공이 형성된 활성탄소중공사막을 제조하였다. 또한 열분해 조건에 따른 phenol/alumina 복합 활성탄소중공사막의 물리적 특성과 기체 투과특성에 대해 살펴보았다. 그 결과, 제조된 phenol/alumina 복합 활성탄소중공사막이 휘발성 유기물질의 대부분을 차지하고 있는 탄화수소를 선택적으로 분리 회수하는데 매우 효과적인 특성을 갖고 있음을 확인할 수 있었다. 따라서 본 연구에서 개발된 phenol/alumina 복합 활성탄소중공 사막은 VOCs의 분리, 농축에 매우 효과적으로 활용 가능할 것으로 기대된다.

Corrosion Behaviors of Dental Implant Alloy after Micro-sized Surface Modification in Electrolytes Containing Mn Ion

  • Kang, Jung-In;Son, Mee-Kyoung;Choe, Han-Cheol
    • Journal of Korean Dental Science
    • /
    • 제11권2호
    • /
    • pp.71-81
    • /
    • 2018
  • Purpose: The purpose of this study was to investigate the corrosion behaviors of dental implant alloy after microsized surface modification in electrolytes containing Mn ion. Materials and Methods: $Mn-TiO_2$ coatings were prepared on the Ti-6Al-4V alloy for dental implants using a plasma electrolytic oxidation (PEO) method carried out in electrolytes containing different concentrations of Mn, namely, 0%, 5%, and 20%. Potentiodynamic method was employed to examine the corrosion behaviors, and the alternatingcurrent (AC) impedance behaviors were examined in 0.9% NaCl solution at $36.5^{\circ}C{\pm}1.0^{\circ}C$ using a potentiostat and an electrochemical impedance spectroscope. The potentiodynamic test was performed with a scanning rate of $1.667mV\;s^{-1}$ from -1,500 to 2,000 mV. A frequency range of $10^{-1}$ to $10^5Hz$ was used for the electrochemical impedance spectroscopy (EIS) measurements. The amplitude of the AC signal was 10 mV, and 5 points per decade were used. The morphology and structure of the samples were examined using field-emission scanning electron microscopy and thin-film X-ray diffraction. The elemental analysis was performed using energy-dispersive X-ray spectroscopy. Result: The PEO-treated surface exhibited an irregular pore shape, and the pore size and number of the pores increased with an increase in the Mn concentration. For the PEO-treated surface, a higher corrosion current density ($I_{corr}$) and a lower corrosion potential ($E_{corr}$) was obtained as compared to that of the bulk surface. However, the current density in the passive regions ($I_{pass}$) was found to be more stable for the PEO-treated surface than that of the bulk surface. As the Mn concentration increased, the capacitance values of the outer porous layer and the barrier layer decreased, and the polarization resistance of the barrier layers increased. In the case of the Mn/Ca-P coatings, the corroded surface was found to be covered with corrosion products. Conclusion: It is confirmed that corrosion resistance and polarization resistance of PEO-treated alloy increased as Mn content increased, and PEO-treated surface showed lower current density in the passive region.

다양한 첨가제에 따른 고투과성 역삼투막의 특성평가 (Evaluation of the Characteristics of High-Flux Reverse Osmosis Membranes with Various Additives)

  • 권현웅;임광섭;위자야 게데 헤리 아룸;한성민;김성헌;박준호;이동준;엄상민;남상용
    • 멤브레인
    • /
    • 제33권6호
    • /
    • pp.427-438
    • /
    • 2023
  • 본 연구에서는 고투과성 및 높은 염 제거율을 가지는 역삼투막의 성능향상을 위하여 다양한 첨가제 및 계면중합 시 경화 온도 및 시간에 따른 특성평가에 대한 연구가 수행되었다. 첨가제가 없는 막과 첨가제를 첨가한 막의 모폴로지는 모두 "ridge-and-valley" 구조를 나타내어, 폴리아미드 층이 다공성 지지층 표면에 성공적으로 중합되었음을 확인하였다. 또한 2-Ethyl-1,3-hexanediol (EHD) 첨가함으로써 향상된 친수성과 수투과율 가졌으며, 이는 접촉각 측정을 통해서 확인되었다. 최종적으로 97.78%와 98.7%의 NaCl 및 MgSO4 제거율과 3.31 L/(m2⋅h⋅bar)의 높은 수투과율을 가진 고투과성 계면중합막을 제조하였다.

양극산화에 의한 티타늄 산화막의 표면 특성 및 생체 활성에 관한 연구 (SURFACE CHARACTERISTICS AND BIOACTIVITY OF ANODICALLY OXIDIZED TITANIUM SURFACES)

  • 이상한;조인호
    • 대한치과보철학회지
    • /
    • 제45권1호
    • /
    • pp.85-97
    • /
    • 2007
  • Statement of problem: Recently, anodic oxidation of cp-titanium is a popular method for treatment of titanium implant surfaces. It is a relatively easy process, and the thickness, structure, composition, and the microstructure of the oxide layer can be variably modified. Moreover the biological properties of the oxide layer can be controlled. Purpose: In this study, the roughness, microstructure, crystal structure of the variously treated groups (current, voltage, frequency, electrolyte, thermal treatment) were evaluated. And the specimens were soaked in simulated body fluid (SBF) to evaluate the effects of the surface characteristics and the oxide layers on the bioactivity of the specimens which were directly related to bone formation and integration. Materials and methods: Surface treatments consisted of either anodization or anodization followed thermal treatment. Specimens were divided into seven groups, depending on their anodizing treatment conditions: constant current mode (350V for group 2), constant voltage mode (155V for group 3), 60 Hz pulse series (230V for group 4, 300V for group 5), and 1000 Hz pulse series (400V for group 6, 460V for group 7). Non-treated native surfaces were used as controls (group 1). In addition, for the purpose of evaluating the effects of thermal treatment, each group was heat treated by elevating the temperature by $5^{\circ}C$ per minute until $600^{\circ}C$ for 1 hour, and then bench cured. Using scanning electron microscope (SEM), porous oxide layers were observed on treated surfaces. The crystal structures and phases of titania were identified by thin-film x-ray diffractmeter (TF-XRD). Atomic force microscope (AFM) was used for roughness measurement (Sa, Sq). To evaluate bioactivity of modified titanium surfaces, each group was soaked in SBF for 168 hours (1 week), and then changed surface characteristics were analyzed by SEM and TF-XRD. Results: On basis of our findings, we concluded the following results. 1. Most groups showed morphologically porous structures. Except group 2, all groups showed fine to coarse convex structures, and the groups with superior quantity of oxide products showed superior morphology. 2. As a result of combined anodization and thermal treatment, there were no effects on composition of crystalline structure. But, heat treatment influenced the quantity of formation of the oxide products (rutile / anatase). 3. Roughness decreased in the order of groups 7,5,2,3,6,4,1 and there was statistical difference between group 7 and the others (p<0.05), but group 7 did not show any bioactivity within a week. 4. In groups that implanted ions (Ca/P) on the oxide layer through current and voltage control, showed superior morphology, and oxide products, but did not express any bioactivity within a week. 5. In group 3, the oxide layer was uniformly organized with rutile, with almost no titanium peak. And there were abnormally more [101] orientations of rutile crystalline structure, and bonelike apatite formation could be seen around these crystalline structures. Conclusion: As a result of control of various factors in anodization (current, voltage, frequency, electrolytes, thermal treatment), the surface morphology, micro-porosity, the 2nd phase formation, crystalline structure, thickness of the oxide layer could be modified. And even more, the bioactivity of the specimens in vitro could be induced. Thus anodic oxidation can be considered as an excellent surface treatment method that will able to not only control the physical properties but enhance the biological characteristics of the oxide layer. Furthermore, it is recommended in near future animal research to prove these results.