• 한국대기환경학회지
• /
• 제20권3호
• /
• pp.371-380
• /
• 2004

In the dust separation by using porous filter media, the structure of dust layer deposited on the filter surface of filter medium directly affects the effective filtration. The present study has investigated the specific resistance (K$_2$') of the dust layer and its porosity ($\varepsilon$$_{c}$) for three different filters; FA composite filter, metal fiber filter and stainless filter. The specific resistance (K$_2$') increased and at the same time the cake porosity ($\varepsilon$$_{c}$) decreased with the increase of filtration velocity, possibly due to the compressible effect of dust layer. However, under the low dust concentration, subsequent dust particles would block the open channels through the layer resulting in high specific resistance of the layer. The FA composite filter among three filters was shown to be the most effective filter for dust cake filtration at low filtration velocities less than 0.1 m/s for an approximate dust concentration of 5 g/㎥.

• 한국지반공학회논문집
• /
• 제17권2호
• /
• pp.135-142
• /
• 2001

사면안정해석을 위해 다공체(porous medium) 이론이 제시되었다. 다공체 이론은 간극수압, 토질입자 및 간극수의 상호작용을 포함하는 여러 가지 지반관련 문제의 이해에 있어 매우 중요하다. 이러한 상호작용은 토질강도 및 변형에 중요한 영향을 미친다. 압밀 예제로서 이러한 모델의 정확도를 첫째로 검증하였다. 사면안정해석에 있어서 토질의 응력 및 강도는 일반적인 구성모델을 포함한 비선형 유한요소해석을 사용하여 정확히 계산되었다. 사면안정해석은 한계상태를 표시하는 파괴면이 나타날 때까지 점차적인 중력의 증가로 실행되었다. 안전율은 증가시킨 중력과 실제사면 중력의 비로서 계산되었다. 제시된 사면 안정 해석 방법의 자세한 사항은 예제를 통하여 설명되었다.

• 한국전산유체공학회지
• /
• 제21권1호
• /
• pp.110-116
• /
• 2016

The present study numerically investigated the deformation of the interface of two-phase fluids flow in a blast furnace. To simulate three-dimensional(3D) incompressible viscous two-phase flow in the furnace filled with the air and molten iron, the volume of fluid(VOF) method based on the finite volume method has been utilized. In addition, the porous medium with the porosity has been considered as the bed of the particles such as cokes and char etc. For the comparison, the single phase flow and the two-phase flow without the porosity have been simulated. The two-phase flow without porosity condition revealed the smooth parabolic profile of the free surface near the outlet. However, the free surface under the porosity condition formed the viscous finger when the free surface was close to the outlet. This viscous finger accelerated the velocity of the free surface falling and the outflow velocity of the fluids near the outlet.

• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.559-567
• /
• 1995

The combustion process within a porous inert medium (PIM) burner is numerical studied. A detailed chemical reaction scheme including thermal and prompt NO$_{x}$ reactions is used to predict the formation and destruction of pollutants such as NO$_{x}$ and CO. The reaction paths for NO$_{x}$ formation are divided to quantify the amount of NO$_{x}$ formed through thermal NO$_{x}$ reaction or through prompt NO$_{x}$ reaction. Emission index is calculated to compare the actual mass of NO$_{x}$ or CO produced through the combustion of unit mass of fuel. It is found NO formation in PIM burner is confined in flame zone and formation is suppressed due to heat loss at down-stream of the flame. Higher production of NO through prompt NO reaction path is observed due to the higher concentration of fuel derivative species and its higher diffusion at flame front. For all equivalence ratios, CO emission within PIM burner is lower than that from the one-dimensional freely-propagating flame. PIM burner flame has better NO$_{x}$ emission index from .psi. = 0.75 to .psi. = 1.1. to .psi. = 1.1.

• 한국가시화정보학회지
• /
• 제7권1호
• /
• pp.9-13
• /
• 2009

Fluorescence recovery after photobleaching (FRAP) has been widely used for the measurement of molecular diffusion in living cells and tissues. We developed an image-based FRAP (iFRAP) technique using a modified real-time microscope and a 488 nm Ar-ion laser. A fractional intensity curve was obtained from the time-lapse images of fluorescence recovery in the bleached spot to determine the diffusion coefficient of fluorescently labeled macromolecules in porous medium. We validated iFRAP through experiments with agar gels (0.5% and 1.5% w/v) containing FITC-Dextrans (10, 70 and 500 kDa MW). Further validation was performed by a Monte Carlo approach, where we simulated the three-dimensional random walk of macromolecules in agar gel model. Diffusion coefficients were deduced from the mean square displacement curves and showed good agreements with those measured by iFRAP.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2017년도 학술발표회
• /
• pp.384-384
• /
• 2017

본 연구에서는 다공성 매질에서의 비선형 흐름에 대한 수치적 분석을 수행하였다. 적용된 수치모형은 ANSYS CFX 3차원 유동해석 모형이며, 모형의 검증은 Mayer et al. (2011)에 의해 수행된 실험결과의 적용을 통해 수행되었다. 유속과 레이놀즈수-마찰계수 관계에 대한 실험결과와 수치결과를 비교한 결과 비교적 잘 일치하였다. 검증에서 적용된 실험결과를 바탕으로 투수성 계수, 점성계수 그리고 공극율의 변화에 따른 유속과 레이놀즈수-마찰계수 관계를 분석하였으며, 각각의 경우에 대해 best curve-fitting을 통해 변화 경향을 정량적으로 분석하였다.

• 설비공학논문집
• /
• 제19권5호
• /
• pp.418-425
• /
• 2007

The power consumption and heat generation in a chip increase as the components are miniaturized and the computing speed becomes faster. Therefore, suitable heat dissipation has become one of the primary limiting factors to ensure the guaranteed performance and reliable operation of the electronic devices. A pin-fin array which may be considered as a porous medium could be used as an alterative cooling system of the electronic equipment. The aim of the present study is to investigate the forced-convective heat transfer characteristics of pin-fin heat exchangers. Convective heat transfer through the pin~fin array is analyzed experimentally based on porous medium approach. The influence of the structure of the pin-fin array including the pin-fin spacing, the pin diameter and plate length on heat transfer characteristic is investigated and compared with the Previous analytical results and existing correlation equations. Nowadays, electronic and mechanical devices become smaller and smaller. In this sense, the main purpose of this study is to decide the optimum pin-fin arrangement to get similar heat transfer performance when the length of the existing cooling system is reduced as a half.

• 한국전산유체공학회지
• /
• 제13권2호
• /
• pp.62-67
• /
• 2008

This study aims to investigate numerically the static stiffness characteristics of porous air bearing and to estimate appropriate permeability values of porous medium. In particular, a new roughness model is proposed and implemented into the commercial CFD code (FLUENT Ver. 6.2) by using C language based user subroutine. The predicted results are extensively compared with experimental data. The roughness model is also validated through comparison with the results from open literature. It is found that the predictions for static stiffness are in good agreement with experimental data. Therefore, the suggested model based on the roughness Reynolds number can be used in studying the stiffness characteristics of porous air bearing effectively. In addition, numerical simulations of various diameter size and conditions are conducted. According the results, it is expected that the static stiffness of porous air bearing has the non-linear characteristics.

• Journal of Photoscience
• /
• 제12권3호
• /
• pp.171-174
• /
• 2005

The relationship between porous surfaces and photoluminescence (PL) behavior of porous silicon carbide (PSC) in various solvents has been studied. The porous surfaces of p-type silicon carbide can be fabricated by electrochemical anodization from the 6H, 15R, 4H-${\alpha}$-SiC substrates in dark-current mode (DCM) condition. We have been investigated the dependence of the PL spectra of PSC under the medium having the different dielectric constants. It has been found that PL depends sensitively on the environment surrounding the surface. The extent of chemically stability on the surface of PSC due to the various solvents was confirmed by reflectance Fourier transform infrared (FTIR) spectroscopy. Detailed IR experiments on the PSC samples were carried out before and after various solvents immersion. These results will be offered important information on the origin of PL in porous structure.

• Journal of applied mathematics & informatics
• /
• 제26권1_2호
• /
• pp.161-176
• /
• 2008

The effect of variable viscosity on MHD mixed convection Hiemenz flow over a thermally stratified porous wedge plate has been studied in the presence of suction or injection. The wall of the wedge is embedded in a uniform Darcian porous medium in order to allow for possible fluid wall suction or injection and has a power-law variation of the wall temperature. An approximate numerical solution for the steady laminar boundary-layer flow over a wall of the wedge in the presence of thermal diffusion has been obtained by solving the governing equations using numerical technique. The fluid is assumed to be viscous and incompressible. Numerical calculations are carried out for different values of dimensionless parameters and an analysis of the results obtained shows that the flow field is influenced appreciably by the magnetic effect, variable viscosity, thermal stratification and suction / injection at wall surface. Effects of these major parameters on the transport behaviors are investigated methodically and typical results are illustrated to reveal the tendency of the solutions. Comparisons with previously published works are performed and excellent agreement between the results is obtained.