• Korean Chemical Engineering Research
• /
• 제53권6호
• /
• pp.814-817
• /
• 2015

A new ionic mass transfer correlation is derived for the fluid-saturated, horizontal porous layer. Darcy-Forchheimer model is used to explain characteristics of fluid motion. Based on the microscales of turbulence a backbone mass transfer relation is derived as a function of the Darcy-Rayleigh number, $Ra_D$ and the porous medium Schmidt number, $Sc_p$. For the Darcy's limit of $Sc_p{\gg}Ra_D$, the Sherwood number, Sh is a function of $Ra_D$ only. However, for the region of high $Ra_D$, Sh can be related with $Ra_DSc_p$. Based on the present backbone equation and the electrochemical mass transfer experiments which are electro plating or electroless plating, the new ionic mass transfer correlation is suggested in the porous media.

• 한국가스학회지
• /
• 제6권4호
• /
• pp.8-16
• /
• 2002

하이드레이트의 존재가 밝혀진 이후 계속적인 실험연구를 통해 평형조건, 열역학적 특성, 구조 kinetics 등 하이드레이트의 기본적 물성에 대한 연구가 지속되어 왔다. 자연 상태에 존재하는 하이드레이트가 미래의 주요한 비재래형 에너지원으로 주목되면서 다공질 저류암 내에서의 하이드레이트 형성 및 해리 메커니즘 규명의 필요성이 요구되고 있다. 이에 본 연구에서는 다공질 암석코어를 사용하여 실험을 수행할 수 있는 실험장비를 제작하여 하이드레이트 형성실험을 수행하였다. 우선, 다공질암 공극 내에서의 하이드레이트 평형조건을 산출하고 기존의 실험결과와 비교함으로써 연구에 사용된 실험장비 및 실험방법의 타당성을 검증하였다. 또한 하이드레이트의 형성실험을 수행하여 압력 및 전기저항의 변화를 통해 다공질암 공각 내에서의 하이드레이트 형성현상을 관찰하였으며, 초기 물포화도가 하이드레이트 형성과정에 미치는 영향을 분석하였다.

• 한국항공우주학회지
• /
• 제32권3호
• /
• pp.22-29
• /
• 2004

박막연의 변형은 고분자 전해질 연료전지의 성능에 상당한 영향을 미친다. 탄소공기판의 응력 분포는 고분자 전해질 연료전지의 안정성과 작동 효율의 중요변수이다. 본 논문에서는 작동 조건에서의 공기판과 박막면의 구조해석을 수행하였다. 박막면의 구조적 변형은 연료전지의 변수들의 분포에 영향을 미친다. 본 연구에서는 두 가지 모델에 대한 해석을 수행하였다. 한가지는 박막면의 물성치를 비선형으로 가정한 것이고, 나머지 한가지는 박막면의 물성치를 비선형으로 가정하고 공기판과 박막면의 접촉면에 접촉 조건을 적용한 경우이다. 이 두 가지 경우에 대해서 해석해본 결과 각각의 응력과 변형율의 분포에서 차이가 있음을 알 수 있었다. 이 결과를 통해 연료전지의 연구에서 비선형 접촉 해석이 필요함을 알 수 있다.

• 설비공학논문집
• /
• 제28권1호
• /
• pp.21-28
• /
• 2016

A typical heat exchanger, found in many industrial sites, is made up of a large number of unitary cells, which causes difficulties when carrying out full-scale three-dimensional numerical simulations of the heat exchanger to analyze the aero-thermal performance. In the present study, a three-dimensional numerical study using a porous media model was carried out to evaluate the performance of the heat exchanger modelled in two different ways : full-scale and simplified. The pressure drop in the air side and gas side along with the overall heat transfer rate were calculated using a porous media model and the results were then compared to results obtained with a one-dimensional flow network model. The comparison between the results for two different geometries obtained using a porous media model and a one-dimensional flow network model shows good agreement between the simplified geometry and the one-dimensional flow network model. The full-scale geometry shows reasonable differences caused by the geometry such as sudden expansion and contraction.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.354-361
• /
• 2005

Physical parameters such as porosity and effective porosity are important physical parameters that determine the transfer and movement of water and solutes in porous media. Various methods of determining these parameters have been developed, with varying degrees of accuracy and applicability. Most of the existing methods produce static results. They do not produce instantaneous and real time of porosity and effective porosity in a porous media. In this study, a new permittivity method called Frequency Domain Reflectometry with Vector analyzer (FDR-V) is proposed to determine the porosity and effective porosity of some sand samples in the laboratory. The advantage of the FDR-V method is that it instantaneously determines the temporal variation of dielectric constants of porous media. Then, the porosity and the effective porosity of porous media are computed using well established empirical equations. Results obtained from the FDR-V method compared favorably with results from other permittivity methods such as gravimetric, injection and replacement tests. The ratio of effective porosity to porosity was $85{\sim}92%$, when FDR-V was used. This value compared favourably with 90%, which has been usually quoted in previous studies. Considering the convenience and its applicability, the measurement system of FDR-V permittivity holds a great potential in porous media and contaminant transport studies.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1996년도 경북지부 결성 및 추계학술발표회 논문집
• /
• pp.58-62
• /
• 1996

To check the variability of the effective diffusion coefficient in the unsaturated porous soil media. a Monte Carlo simulation was done for the equation suggested by Millington and Quirk(1961). The results shows that the probability density function of D$_{c}$/D$_{o}$ is positively skewed. It means the chance of having less effective diffusion coefficient values in the soil media than mean value is high. Also, the distribution types of D$_{c}$/D$_{o}$ are about same regardless of assumed distribution types of input parameters.ers.ers.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.16-23
• /
• 2009

The porous pellets were prepared from porphyry by slurry foaming method. The effect of sintering temperatures on pore structure of porous porphyry pellets with different extension ratio ($E_R$) was investigated by specific surface area, water absorption and porosity, which changed with sintering temperatures. When the sintering temperatures increased from $975^{\circ}C$ to $1075^{\circ}C$, specific surface area and water absorption of the all samples decreased. In case of the sample with an equal sintering temperature, $E_R=3.0$ pellets had little influence on pore structure compared to the $E_R=2.0$ pellets. As a results, it was shown by SEM that facilitated formation of micro pores at $E_R=2.0$ pellets shrunk increasingly after sintering process. At $E_R=3.0$ and sintering temperature at $1025^{\circ}C$, optimum conditions of the porous porphyry porous pellets was found. Also, Escherichia coli removal efficiency of the silver-containing porphoyry porous pellets was measured for the feasibility as a antibacterial media. The antibacterial activity of prepared silver-containing sample was maintained above 90% for 40 days.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.703-704
• /
• 2008

We fabricated and tested porous silicon-based electroosmotic pumps. Compared to other pumping media, porous silicon is beneficial for obtaining comparable flow rates with much lowered electric potential, while maintaining enough mechanical properties. We fabricated porous silicon with two sided-reactive etching processes. We found higher flow rate per electric potential (consistent with previous studies) and we also found asymmetric flow rates for different pumping directions. We plan to utilize this asymmetry for AC pumping applications.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.419-420
• /
• 2012

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.20-25
• /
• 2008

The finite element analysis for porous media is severe job because constituents have different physical peoperties, and element's continuity and stability should be considered. Thus, we propose the new mixed finite element method in order to overcome the problems. In this method, multi time step, remeshing step, and sub iteration step are introduced. The multi time step and remeshing step make it possible to satisfy a stability and an accuracy during sub iteration in which global time is determined. Finally, the proposed method is compared with the ABAQUS(2007) software and exact solution(Schiffman 1967) through two dimensional consolidation model.