• Korean Chemical Engineering Research
• /
• 제50권6호
• /
• pp.945-951
• /
• 2012

광촉매반응기의 충전제로서 glass bead-광촉매담체를 control로 하고 다공성의 silica-based 광촉매담체를 사용하였을 때의 악취 및 VOC를 함유한 폐가스의 광촉매 처리효율에 대한 광촉매담체 다공성의 영향평가를 수행하였다. 다공성의 silica-based-광촉매담체의 광촉매 코팅량은 $1,716.3{\mu}g/cm^2$로서 nonporous glass bead(control)에 담지된 광촉매코팅량인 $670{\mu}g/cm^2$ 값의 약 250%이었다. Porous silica-based 담체가 충전된 광촉매반응기의 황화수소 및 톨루엔 제거효율은 각각 22% 및 82%로서, glass-bead 담체가 충전된 UV/광촉매반응기의 경우의 황화수소 및 톨루엔 제거효율인 각각 19% 및 53%와 비교하였을 때에 황화수소의 경우는 약 16% 증가하였고 톨루엔의 경우는 약 55% 증가하였다. 따라서 다공성의 silica-based 광촉매담체를 사용함으로써 황화수소와 톨루엔의 동시처리효율을 각각 제고하였고, 처리효율의 제고율은 황화수소보다 톨루엔의 경우가 3.4배 높았다.

• 한국가스학회지
• /
• 제17권1호
• /
• pp.26-34
• /
• 2013

상 변화(phase change)를 수반한 다상 유동 연구(multiphase flow analysis)는 증발, 응축과 같은 많은 분야에 적용, 응용될 수 있고 현상의 복잡성 때문에 많은 연구의 관심을 받고 있는 분야이다. 본 연구에서는 극저온 유체인 액화질소가 다양한 밀도의 글라스 울 내부 다공성 매질속으로 스며들면서 나타나는 거동을 살펴보았다. 유동에 영향을 미치는 투과성 계수에 대해서, 외부 압력의 영향성에 대한 실험을 진행하였고 논의하였다. 극저온 유체인 액화질소를 실험유체로 사용하여 사각 기둥 실린더 내부의 유체의 유동에 대한 실험으로 유체의 유동을 살펴보았다. 그 결과 벌크 밀도가 커짐에 따라 투과성 계수가 작아지고, 거리에 따른 압력변화의 비선형성이 커짐을 보였다. 마지막으로 CFD 전산유동 프로그램으로 실험결과와 동일한 상황을 모사하였으며, 이를 실험결과와 비교 분석하였다. 이에 대한 검증결과, 시뮬레이션 결과가 실험결과와 유사한 경향과 결과를 보여주었다.

• 한국세라믹학회지
• /
• 제23권5호
• /
• pp.93-101
• /
• 1986

Microporous glasses were prepared from the 50 $SiO_2-44$ $B_2O_3-6$ $Na_2O$(wt%) parent glass by the phase eparation technique and were characterized by SEM, BET, and Gas Adsorption methods to investigate the possiblity of their use as salt-rejection membranes for reverse osmosis. The conditions of the phase separation for the possible glass membranes were optimized for the given parent glass. The temperature and duration of heat-treatment were desired to be lower(853K) and shorter (1/2~1 hr) respectively. The specific surface areas of porous glasses prepared in this study were about 80~120$m^2$/g and their pore size distribution had a unimodal shape(peak pore radius less than 15$\AA$) It was suggested that the porous glass obtained in this work could be effective for salt-rejection in point of pore size distributions but the way to increase its surface area for the high flux must be studied.

• 대한기계학회논문집B
• /
• 제33권11호
• /
• pp.886-893
• /
• 2009

To develop glass panel vacuum lift system for the post process in module line of FPD(Flat panel display) such as LCD and PDP, new vacuum adsorption parts of this system are proposed. These parts are composed of variable geometry configurations utilizing ceramic porous medium for variable size of glass panels. In order to design this device, detail understanding of flow phenomena in the flow path of vacuum adsorption system is essential. Thus, CFD analysis and designs are performed for several configurations in terms of pressure drop and balancing force at the adsorption side. From the result, new configuration is recommended for optimum design and manufacturing purpose.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.913-920
• /
• 2013

This paper presents an applicable basic design that can configure non-contact levitation table for conveying a large sheet of glass. The suggested air levitation table consists of a series of air chambers with porous pads and fans as the conveyor system. The air supply chambers are arrayed to supply an adequately strong upward airflow for supporting the glass. Levitation is controlled by the size and discharge velocity, of the chamber arrays, as well as the glass supporting height. After pre-evaluation of the glass rigidity and the filer functional performance, a one-way fluid structure interface (FSI) analysis is performed for predicting pressure and deflection working of the 8G glass in the transverse and longitudinal directions, respectively. After comparing calculated levels of flatness of the glass, it determines the chamber array for the linear non-contact conveying motion.

• 한국산학기술학회논문지
• /
• 제9권4호
• /
• pp.878-885
• /
• 2008

최근에 많은 수요와 각광을 받고 있는 디스플레이 장치에서 CRT는 곡면이며 무겁고 큰 부피 때문에 LCD, PDP, OLED와 같은 평판디스플레이(FPD)로 대체되고 있다. FPD는 $0.6\sim0.8mm$ 두께의 대면적 글래스에 여러 공정을 거친 후에 최종 제품 규격으로 절단하여 제작하기 때문에 글래스의 면적이 크면 클수록 FPD의 생산성이 높다는 밀접한 관계를 갖는다. 따라서 FPD 제조 업계에서는 글래스 면적을 증가시키기 위하여 노력하고 있으며, 예를 들면, 현재 8세대 LCD인 경우 약 $2,200mm\times2,600mm$의 면적을 가진다. 이러한 글래스를 이송하는 대표적인 장치로서 공기부상 컨베어시스템은 압축공기를 이용해서 FPD용 대면적 글래스 등을 약 $0.3\sim0.5mm$ 정도 부상시켜 비접촉으로 이송할 수 있는 장치이다. 이 때 글래스와 다공질판 표면 사이의 공기 유동이 모델링되고 해석되며, 이것으로부터 글래스의 공기부양 조건이 예측될 수 있다. 글래스를 이송시 전기공급 중단에 의하여 압축공기가 공급되지 않아 부상판과 접촉이 발생하였을 때, 자기윤활 특성을 가진 다공질판 위의 글래스는 1mm 홀을 많이 가진 사각덕트 부상판 위의 글래스와 조사, 비교된다.

• Smart Structures and Systems
• /
• 제22권4호
• /
• pp.433-440
• /
• 2018

Pavements porous concrete is a noble structure design in the urban management development generally enabling water to be permeated within its structure. It has also capable in the same time to cater dynamic loading. During the technology development, the quality and quantity of waste materials have led to a waste disposal crisis. Using recycled materials (secondary) instead of virgin ones (primary) have reduced landfill pressure and extraction demanding. This study has reviewed the waste materials (Recycled crushed glass (RCG), Steel slag, Steel fiber, Tires, Plastics, Recycled asphalt) used in the pavement porous concretes and report their respective mechanical, durability and permeability functions. Waste material usage in the partial cement replacement will cause the concrete production cost to be reduced; also, the concretes' mechanical features have slightly affected to eliminate the disposal waste materials defects and to use cement in Portland cement (PC) production. While the cement has been replaced by different industrial wastes, the compressive strength, flexural strength, split tensile strength and different PC permeability mixes have depended on the waste materials' type applied in PC production.

• 설비공학논문집
• /
• 제10권5호
• /
• pp.600-609
• /
• 1998

The experimental investigation of thermal response characteristics by the air flow through the porous media has been carried out. The packed spheres of steel or glass were considered as the porous media in the present study. Temperature distributions of the fluid in the porous media as well as pressure drops through the porous media were measured. The transient temperature variations in the porous media are compared favorably with the analytical results in the high Reynolds number ranges. However, in the low Reynolds number ranges, the experimental data deviate from the analytical results, due to the dominant heat conduction penetration to the upstream direction, which is not considered in the analytical model. The cool-down response of porous media is found to be dependent upon the specific dimensionless time considering the material property and air velocity. The heat discharge process is recommended to be operated until a certain time, considering the cost efficiency.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.7.2-7.2
• /
• 2009

Nanoporous bioactive glass(NBG) ceramic with well interconnected pore structures were fabricated bytriblock copolymer templating and sol-gel techniques. Hierarchically porous BGbeads were also successfully synthesized by controlling the condition of solvent.The beads have hierarchically nano- and macro-pore structure with a sizesbetween several tens nanometers and several hundred micrometers. Both NBG andBG beads show superior bone-forming bioactivity and good in vitrobiodegradability. Biocompatibility both in vitro and in vivo were examed andwas revealed that it largely relies on the pore morphology as well ascomposition. Our synthetic process can be adapted for the purpose of preparingvarious bioceramics, which have excellent potential applications in the fieldof biomaterials such as tissue engineering and drug storage.

• 한국세라믹학회지
• /
• 제28권1호
• /
• pp.29-36
• /
• 1991

Microporous glasses in the system TiO2-SiO2-Al2O3-B2O3-CaO-Na2O were prepared by the phase-separation technique. Morphology and distribution of pore and specific surface area of glasses heated and leached out at various conditions were investigated by SEM and Porosimeter. Crystallization of glasses heated above transition temperature was also inspected by X-ray diffraction method. When the heating temperature and time increased, the pore size and volume increased, but the specific surface area decreased above the critical temperature. The phase-separation, specific surface area and pore size showed more sensitive change on the variation of heating temperature than of heating time. The specific surface area and micropore volume of porous glasses prepared in this study were about 120-330$m^2$/g and 0.001-0.01cc/g, respectively. Mean pore size of porous glasses were about 20-90$\AA$. Anatase phases was deposited when the parent glass was heat-treated at 75$0^{\circ}C$ for 6hrs.