• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.4
• /
• pp.11-19
• /
• 2018

This study was conducted to develop the manufacturing method of biochar using pruned stems of pear tree and its application effect on the crop growth and soil physico-chemical properties. In this study, biochar derived from pruned stems of pear tree at heating temperature of $300^{\circ}C$, $500^{\circ}C$ and $700^{\circ}C$ in heating times of 2, 3 and 4 hours, were tested in the changes of their chemical properties during biochar processing. The pH, Exch. K, Exch. Mg and cation exchange capacity (CEC) increased as the pyrolysis temperature increased during the production of biochar, and the change of these properties rapidly occurred at $500^{\circ}C$. However, as the pyrolysis temperature increased, ash content increased and total carbon (T-C), yield decreased. And the change of the properties in response to the heating time was not shown. It was thought that it would be desirable to set the production conditions of biochar at $500^{\circ}C$ for 2 hours in consideration of the change of chemical properties and the ash content and yield. And also, were conducted the experiments to establish manufacturing method of farm-made biochar using drum biochar manufacturing machine and investigate the application effects of biochar on the cultivation of chinese cabbage and tomato. Application of biochar derived from pruned stems of pear tree could enhance pH, organic matter (OM), total carbon (T-C) of soil. On the other hand, soil electrical conductivity (EC), NO3-N were lowered compared to the control which has no application. The bulk density, porosity and aggregate formation of soil were improved by biochar application. The fresh matter yields of chinese cabbage and tomato were significantly increased in proportion to the application rate of biochar. This study demonstrated the effect of the biochar derived from agricultural byproduct to be as a low cost potential soil ameliorant by physico-chemical properties in eco-friendly greenhouse cultivation.

• Economic and Environmental Geology
• /
• v.55 no.4
• /
• pp.317-338
• /
• 2022

Physicochemical characteristics and evaluation were studied by subdividing the concretes, bricks and earth pipes on the site of the Japanese Ministry of General Affairs in Joseon Dynasty, known as modern architecture, into three periods. Concretes showed similar specific gravity and absorption ratio, and large amounts of aggregates, quartz, feldspar, calcite and portlandite were detected. Porosity of the 1907 bricks were higher than those of 1910 and 1950 bricks. All earthen pipe is similar, but the earlier one was found to be more dense. Bricks and earthen pipes are dark red to brown in color within many cracks and pores, but the matrix of the earthen pipe is relatively homogeneous. Quartz, feldspar and hematite are detected in bricks, and mullite is confirmed with quartz and feldspar in earthen pipes, so it is interpreted that the materials have a firing temperature about 1,000 to 1,100℃. Concretes showed similar CaO content, but brick and earthen pipe had low SiO₂ and high Al₂O₃ in the 1907 specimen. However, the materials have high genetic homogeneity based on similar geochemical behaviors. Ultrasonic velocity and rebound hardness of the concrete foundation differed due to the residual state, but indicated relatively weak physical properties. Converting the unconfined compressive strength, the 1st extended area had the highest mean values of 45.30 and 46.33 kgf/cm², and the 2nd extended area showed the lowest mean values (20.05 and 24.76 kgf/cm²). In particular, the low CaO content and absorption ratio, the higher ultrasonic velocity and rebound hardness. It seems that the concrete used in the constructions of the Japanese Ministry of General Affairs in Joseon Dynasty had similar mixing characteristics and relatively constant specifications for each year. It is interpreted that the bricks and earthen pipes were through a similar manufacturing process using almost the same raw materials.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.3
• /
• pp.168-177
• /
• 2008

Trafficablility of a miner and potential environmental impacts due to mining activities should be considered in the selection of a commercial manganese nodule mining site. These two factors can be evaluated comparatively with physical properties and shear strength of sea-bed sediments. For the qualitative comparison of potential minig sites in terms of these two factors, physical properties such as water contents, void ratios, porosities, and grain densities, and shear strengths of surface sediments were determined for the three potential manganese nodule mining sites(KR1, KR2, and KR5) in the Korean manganese nodule contract area, northeast Pacific. For the study, sediment samples were collected from 107 stations from 2004 to 2006. The physical properties of surface sediments showed more significant differences between northern(KR1, KR2) and southern(KR5) blocks than between northern blocks(KR1 vs. KR2). Water content, void ratio, and porosity of sediments from KR5 were relatively higher than those from KR1 and KR2. Grain density of sediments from KR5 was relatively lower than those from KR1 and KR2. Shear strengths of the top 10cm sediments were higher in KR1 and KR2, whereas those of the deeper part were highest in KR5 block. Generally, sediments of high water contents are less suspendible than those of the low water contents by benthic disturbances, thus less disturbance is expected in the sediments of high water content by mining activities. In terms of trafficability, the shear strength of sediment below 10 cm deep is more important than shallower part because miner will disturb at least top 10 cm interval of the surface sediments. Base on these results, we conclude that KR5 area will be the best site for commercial mining among three investigated sites in this study.

• Horticultural Science & Technology
• /
• v.33 no.3
• /
• pp.435-442
• /
• 2015

The main objective of this work was to identify and evaluate possible substrate alternatives or amendments to peat moss. This study involves the physical and chemical characterization and growth test of wood sawdust and wood fiber in order to evaluate their use as components of horticultural media. The carbohydrate content, C/N ratio, pH, phenolic compound, total porosity and water holding capacity were 58.9%, 425.1, 4.8, 181.8 ($mg{\cdot}g^{-1}$), 82.5% and 47.1% in wood sawdust and 41.1%, 240.8, 5.9, 29.8 ($mg{\cdot}g^{-1}$), 90.6% and 56.2% in wood fiber, respectively. Wood sawdust (K, $998.0mg{\cdot}100g^{-1}$ ; Ca, $1196.0mg{\cdot}100g^{-1}$; Mg, $105.6mg{\cdot}100g^{-1}$) and wood fiber (K, $1250.1mg{\cdot}100g^{-1}$; Ca, $1982.6mg{\cdot}100g^{-1}$; Mg, $173.1mg{\cdot}100g^{-1}$) showed adequate mineral elements properties compared to peat moss (K, $0.02mg{\cdot}100g^{-1}$; Ca, $0.57mg{\cdot}100g^{-1}$; Mg, $0.13mg{\cdot}100g^{-1}$) for their use as growing media. The mixtures of the horticultural media were prepared using different substrate as wood sawdust and wood fiber to grow Chinese cabbage (Brassica campestris L.) in a greenhouse. The seed germination, leaf area and stem height were 75%, $0.50cm^2$ and 2.8 cm in PS substrate (containing 30% peat moss, 10% perlite and 60% wood sawdust) and 95%, $0.65cm^2$ and 3.3 cm in PF substrate (containing 30% peat moss, 10% perlite and 60% wood fiber), respectively. The seed germination and stem height of the PF substrate (containing 30% peat moss, 10% perlite and 60% wood fiber) was higher than those in peat moss (control). Utilization of wood by-product can be considered as an alternative media component to substitute the widely using expensive peat moss.

• Economic and Environmental Geology
• /
• v.44 no.1
• /
• pp.71-82
• /
• 2011

The unsaturated soil column tests were carried out for weathered gneiss soil and weathered granite soil in order to obtain the relationship between rainfall intensity and infiltration velocity of rainfall on the basis of different unit weight conditions of soil. In this study, volumetric water content and pore water pressure were measured using TDR sensors and tensiometers at constant time interval. For the column test, three different unit weights were used as in-situ condition, loose condition and dense condition, and rainfall intensities were selected as 20 mm/h and 50 mm/h. In 20 mm/h rainfall intensity condition, average rainfall infiltration velocities for both gneiss and weathered granite soils were obtained as $2.854{\times}10^{-3}$ cm/s ~ $1.297{\times}10^{-3}$ cm/s for different unit weight values and $2.734{\times}10^{-3}$ cm/s ~ $1.707{\times}10^{-3}$ cm/s, respectively. In 50 mm/h rainfall intensity condition, rainfall infiltration velocities were obtained as $4.509{\times}10^{-3}$ cm/s ~ $2.016{\times}10^{-3}$ cm/s and $4.265{\times}10^{-3}$ cm/s ~ $3.764{\times}10^{-3}$ cm/s respectively. The test results showed that the higher rainfall intensity and the lower unit weight of soil, the faster average infiltration velocity. In addition, the weathered granite soils had faster rainfall infiltration velocities than those of the weathered gneiss soils except for the looser unit weight conditions. This is due to the fact that the weathered granite soil had more homogeneous particle size, smaller unit weight condition and larger porosity.

• Korean Journal of Soil Science and Fertilizer
• /
• v.16 no.2
• /
• pp.119-125
• /
• 1983

To find out problems and changing soil properties induced by leveling of paddy, a field survey was carried out with questionares to farmers of 68 project areas (990 farmers). The soil characteristics between natural soils and cut out sites was compared with soil samples taken from 37 project areas. More than 70 percents of farmers answered to the questionares expressed satisfaction on the paddy land leveling project; however, some farmers replied dissatisfaction that the arable land was decreased the soil productivity due to loss of surface soil or insufficient surface leveling, that the government support was insufficient and that transplanting of rice might be delayed due to retardation of the project. 1. The rate of cut out soils during the land leveling on plain terrain was about 15.3%, but the rates on gently sloped terrain (2-7% slopes) and sloped terrain (7-15% slopes) were relatively high showing 25.9% and 45%, respectively. 2. The deterioration of physical properties was clear in cut out site where the hardness and bulk density increased and the porosity and the rate of water stable aggregate decreased. 3. The degree of deterioration of physical properties on the Diluvial terrace was more severe than on plains or sloped alluvial fans and valleys. The decrease of available phosphorous and the content of organic matter in the cut out place due to land leveling were prominent. 4. The rice yield from cut site was decreased by 28% comparing with that from natural soils.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.1
• /
• pp.64-71
• /
• 2018

To improve the soil of reclaimed land, we added organic materials at a level of 3,000 kg/10 a. As a result, the electrical conductivity (EC) value of reclaimed soil decreased by 58%, the organic material content increased from 6.7 to 16.0 g/kg, the porosity increased from 1.57 to 1.31%, the soil hardness decreased from 20.2 to 17.9 mm and the plow layer was deepened from 19.8 to 26.8 cm. After these physiochemical improvements to the reclaimed soil, the growth phase of crops was improved compared to that of non-treatment crops. The height of kenaf (Hibiscus cannabinus L.) cultivated in the reclaimed land containing organic materials was increased by 18.8%. Especially, the improvement effects of pellet type manure compost and rice straw on kenaf were more preferable than those of other organic materials. When the kenaf was cultivated in the reclaimed land containing organic materials, the yield increased. The average yield of the treatment crops was 9,218 kg/10 a, 2.1 times higher than that of non-treatment crops. The most effective treatments to increase the yields were pellet type manure compost (10,848 kg/10 a, 148% increase), rice straw (120% increase) and chopped kenaf (95% increase). To increase the physicochemical enhancements to the reclaimed land soil and most improve yields, the most effective type of organic materials was the pellet. The organic material types that maintained a better growth phase and most increased the yield were the liquid and pellet types. When we used pellet type organic material, the plant height of kenaf was increased by 41% in comparison with that of the non-treatment crops and yield was increased by more than 122%. Additionally liquid type organic material improved the yield (by 127%).

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.739-752
• /
• 2006

Deep-sea surface sediments acquired by multiple corer from 69 stations in the Clarion-Clipperton fracture zone of the northeast equatorial Pacific, were examined to understand the correlation of mass physical properties and sedimen-tological processes. The seabed of the middle part ($8-12^{\circ}N$) of the study area is mainly covered by biogenic siliceous sediment compared with pelagic red clays in the northern part ($16-17^{\circ}N$). In the southern part ($5-6^{\circ}N$), water depth is shallower than carbonate compensation depth (CCD). The mass physical properties such as grain size distribution, mean grain size, water content, specific grain density, wet bulk density, void ratio, and porosity of sediments are distinctly different among the three parts of the study area. Surface sediments in northern part are characterized by fine grain size and low water contents possibly due to low primary productivity and high detrital input. Conversely, sediments in the middle part are characterized by coarse grain size and high water contents, which might be caused by high surface productivity and deeper depth than CCD. The sediments show low water contents and high density in the southern part, which can be explained by shallower depth than CCD. Our results suggest that the variations in mass physical properties of sediments are influenced by combined effects including biogenic primary productivity of surface water, water depth, especially with respect to CCD, sedimentation rate, detrital input, and the geochemistry of the bottom water (for example, formation of authigenic clay minerals and dissolution of biogenic grains).

• Journal of Bio-Environment Control
• /
• v.15 no.3
• /
• pp.231-238
• /
• 2006

The physical properties of seven perlites different in particle size distribution were investigated to develop perlite bag culture in Korea. Particle sizes of 1.0-2.8mm and larger than 2.8 mm were rather evenly distributed in S-1 (1.2-5 mm), S-2 (0.15-5 mm) and S-5 (parat No.1). Larger particles were less in S-3 (1-3 mm), S-4 (Parat No.2), S-6 (OTAVI) and S-7 (Agroperl B-3). S-4, S-6 and S-7 contained lots of particles less than 1 mm in size. Total porosity was similar among substrates with the value of $59{\sim}62%$. Container capacity was between 35-40% regardless of substrates except in S-2 with 27.7%. Water content, which was about 60% at 0 kPa, was decreased sharply at 4.90 kPa regardless of substrates, which meant the easily available water was plenty in any kind of perlite tested. Substrates, S-1, S-2 and S-3 with different particle size distribution, were investigated to evaluate for perlite bag culture. Six tomatoes (Licopersicon esculentum Mill. cv. Rokkusanmaru) were planted in a perlite bag of 40 liters with the dimension of 120cm in length and 34cm in width. The amount of nutrient solution supplied and its drainage dependent on daily integrated radiation didn't show any regular trend during the growth. Roots in the bag were distributed evenly in S-1 and S-2 than in S-3. Plant grown in S-1 showed the highest total and marketable yield of 8,628 and 7,759 kg/10a, respectively. The number of small size fruits and malformed fruits were more in S-3. Consequently, S-1 with the particle size distribution of 1.2-5 mm is suggested as desirable substrate for perlite bag culture.

• Korean Journal of Plant Resources
• /
• v.24 no.5
• /
• pp.642-649
• /
• 2011

Ginseng growth is largely affected by characteristics of soil in Ginseng field. In this study, we determined the critical ranges of physico-chemical properties of soil for optimization of ginseng growth by analyzing the soils from Anseong and Pocheon regions in Gyeonggi province. Fresh weight of ginseng was 2 to 5 fold higher in good growth field compared to poor growth field within Anseong region. In the case of Pocheon region, 1.5 to 2 fold differences of fresh weight of ginseng was observed between good and poor growth field. These results indicate the difference of ginseng growth even in the same region. Based on these results, critical ranges of physico-chemical properties of soils were determined by comparing the good and poor growth field of each regions, which are follows; more than 50% of soil porosity, 2.0~2.8 g/kg of total nitrogen, 500~900 mg/kg for Av. $P_2O_5$, 2.3~3.5 $cmol_c\;kg^{-1}$ for Exch. Ca in Anseong; less than 13% of liquid phase, 400~650 mg/kg for Av. $P_2O_5$, 4.0~4.7 $cmol_c\;kg^{-1}$ for Exch. Ca, less than 0.8 and 0.5 $cmol_c\;kg^{-1}$ for Exch. Mg and K, respectively, in Pocheon. Interestingly, we found that ginseng growth was affected by exchangeable base ratio (Ca:Mg:K) especially in Anseong region, which were 6:2:1 in good growth field while 4:2:1 in poor growth field. Critical ranges for nutrient contents of ginseng leaves were also characterized, which are less than 0.2% and 0.22% of each P and Mg, respectively, in Anseong, while less than 1.8% and 0.18% of each N and P, respecively, and 1.5~3.0% of K in Pocheon. In addition, we determined critical ranges for inorganic nutrient contents in the current study.