• Food Science of Animal Resources
• /
• v.27 no.3
• /
• pp.314-319
• /
• 2007

The aims of this work were to compare the effects of dehairing methods and sex on pork quality and cold storage stability. For this study, one half of40 pigs were dehaired by scalding in the same abattoir, and the other half by dehiding. Each treatment consisted of one half gilts and one half castrated male pigs. Meat quality traits were measured at 24 hr after slaughter, and thiobarbituric acid (TBA), metmyoglobin contents and total plate counts (TPC) were evaluated at 1, 7, 14 and 21 days of cold storage. The carcass weight and backfat thickness of pigs dehaired by scalding were significantly higher than those dehided (p<0.05). Compared to scalded carcasses, dehided carcasses had a lower longissimus dorsi muscle temperature (p<0.05). Furthermore, dehided carcasses had significantly lower drip loss than scalded carcasses (p<0.05). However, meat color parameters were not affected by the dehairing method. During cold storage, TBA values of scalded carcasses were slightly higher initially, whereas the dehided carcasses had higher TBA values at 21 days (p<0.05). The total plate counts (TPC) associated with scalding and dehiding treatment were not significantly different at any point during cold storage. The TPC exponentially increased in both scalded and dehided carcasses from 7 to 14 days of cold storage.

• Korean Journal of Veterinary Service
• /
• v.31 no.2
• /
• pp.195-205
• /
• 2008

Yersinia enterocolitica is a zoonotic agent, and to cause food poisoning. This study was carried out to get some basic information for the control of Yersinia infection. A total of 1,680 samples were collected from beef and pork carcasses from January 2006 to December 2007 in Seoul. The isolation rate was higher in pork carcass than in beef carcass. Five (0.59%) Yersinia enterocolitica were isolated from the 840 of beef carcasses, and eighteen(2.14%) were isolated from the 840 of pork carcasses. Among 23 strains, 22 were classified into biotype 1A, and one was biotype 6. In serotyping of Y enterocolitica isolates, 21 strains were untypable (UT), and 2 were O5 and O8 respectively. In PCR, Ail gene was not detected in all of 23 strains that determined non-pathogenic. In antimicrobial susceptibility test, twelve strains (52.2%) of 23 isolates showed the multi -resistant patterns with over 3 drugs. PFGE was performed after the genomic DNA of twenty three isolates, which was digested with Xba I. the 23 isolates showed 12 ($A{\sim}L$) PFGE type.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.9
• /
• pp.1448-1457
• /
• 2019

Objective: The present work aimed at evaluating the effects of carcass quality grade (QG) on the quality characteristics of pork meat according to Korean carcass QG system. Methods: Pork carcasses with varying in QG: 1+ (QG1+, n = 10), 1 (QG1, n = 10) and 2 (QG2, n = 10), were used to evaluate the relationship between carcass QG and meat quality. The meat quality traits, fatty acid profiles, flavor compounds and sensory qualities were measured on the longissimus dorsi muscle samples of these carcasses. Results: Pork meat of higher QG (QG1+) presented significantly higher fat content (5.43%), C18:2n-6 level (19.03%) and total unsaturated fatty acids content (62.72%). Also, the QG1+ meat was significantly higher in levels of classes of flavor compounds such as aldehydes, alcohols and hydrocarbons in comparison to those of the meat samples from the lower QG groups. The sensory evaluation results (flavor, juiciness, tenderness, and acceptability scores) of QG1+ meat was significantly higher than the QG1 and QG2 meats. The pork with lower QG (i.e., QG2) was found positively correlated to redness (r = 0.987), C18:1n-9 level (r = 1.000) but negatively correlated to the fat content (r = -0.949), and flavor (r = -0.870), juiciness (r = -0.861), tenderness (r = -0.862) and acceptability (r = -0.815) scores. Conclusion: The pork with higher QG had higher fat content, total unsaturated fatty acids and better eating quality, thus producing pork with higher QGs should be considered in order to satisfy the consumer's expectation.

• The Korean Journal of Food And Nutrition
• /
• v.4 no.1
• /
• pp.69-74
• /
• 1991

This study was carried out to investigated the influence of methionine addition on quality of pork carcasses, 48 crossbred pigs were alloted to 4 treatments, NRC methionine requirement(A), additions of 0.035%(B), 0.07%(C) and 0.105%(D) to NRC methionine requirement. The results obtained are summarized as follows : 1. Cut meats were not significantly affected by methionine levels. But the treatment C showed slightly higher than the other treatments. 2. Chemical compositions of cut meats were not different from treatments. However, the treatment D showed slightly higher moisture, crude fat ands ash contents than other treatments. And crude protein content was better in treatment C than the other treatments. 3. There was no significant difference the among treatments, the best value of water bolding capacity was recorded with the treatment C, and pH value of the treatment A and D Increased as compared with the treatment B and C.

• Journal of Animal Science and Technology
• /
• v.62 no.5
• /
• pp.753-760
• /
• 2020

The objective of this study was to investigate the influence of increasing carcass weight (CW) on meat quality traits including meat color, water-holding capacity (WHC), tenderness, backfat thickness and intramuscular fat (IMF) content of pork loin. A total of 96 pork carcasses (48 LYD [Landrace × Yorkshire × Duroc] barrows and gilts) were selected at a commercial slaughterhouse. Each gender had commercial CW (≤ 90 kg), heavy CW (91-100 kg) and very heavy CW (> 100 kg) (16 carcasses from each CW group). Loin cuts (Longissimus lumborum) were excised to investigate meat color (CIE L*a*b*), drip loss, cooking loss, released water, Warner-Bratzler shear force (WBSF), and IMF content. Backfat thickness and IMF content of pork loin samples were significantly (p < 0.05) increased with increasing CW, although there was no significant difference in ultimate pH (pHu). CIE a* increased significantly (p < 0.05) with increasing CW, while there were no significant differences in CIE L* or CIE b* among CW groups. Although all WHC measures showed no significant differences among CW groups, WBSF increased significantly (p < 0.01) with increasing CW. Sensory flavor score was significantly increased while panel score for tenderness was decreased significantly (p < 0.001) with increasing CW. Consequently, CW had a positive correlation with flavor but negative correlation with tenderness. These results indicate that the increased IMF content improves flavor, juiciness and palatability, although tenderness deteriorates with increasing CW.

• Food Science of Animal Resources
• /
• v.38 no.5
• /
• pp.1109-1119
• /
• 2018

In this paper, we report the development of a nondestructive prediction model for lean meat percentage (LMP) in Korean pig carcasses and in the major cuts using a machine vision technique. A popular vision system in the meat industry, the VCS2000 was installed in a modern Korean slaughterhouse, and the images of half carcasses were captured using three cameras from 175 selected pork carcasses (86 castrated males and 89 females). The imaged carcasses were divided into calibration (n=135) and validation (n=39) sets and a multilinear regression (MLR) analysis was utilized to develop the prediction equation from the calibration set. The efficiency of the prediction equation was then evaluated by an independent validation set. We found that the prediction equation - developed to estimate LMP in whole carcasses based on six variables - was characterized by a coefficient of determination ($R^2_v$) value of 0.77 (root-mean square error [RMSEV] of 2.12%). In addition, the predicted LMP values for the major cuts: ham, belly, and shoulder exhibited $R^2_v$ values${\geq}0.8$ (0.73 for loin parts) with low RMSEV values. However, lower accuracy ($R^2_v=0.67$) was achieved for tenderloin cuts. These results indicate that the LMP in Korean pig carcasses and major cuts can be predicted successfully using the VCS2000-based prediction equation developed here. The ultimate advantages of this technique are compatibility and speed, as the VCS2000 imaging system can be installed in any slaughterhouse with minor modifications to facilitate the on-line and real-time prediction of LMP in pig carcasses.

• Food Science of Animal Resources
• /
• v.41 no.2
• /
• pp.224-236
• /
• 2021

The objective of this study was to investigate the effects of quality grade (QG) on the physicochemical composition and eating quality attributes of pork belly and shoulder butt. Seventy-two growing-finishing crossbred pigs were slaughtered and their carcasses were graded according to the Korean pork carcass grading system. Based on the grading criteria, the carcasses were classified into: QG 1+ (n=23), QG 1 (n=23) and QG 2 (n=26) groups. At 24 h postmortem, belly and shoulder butt cuts were collected from the QG groups and used for analysis of meat quality, flavor compounds and eating quality attributes. Results showed that the variation in fat content among QG was approximately 2% in the both cut types. The QG showed no effects on all the quality traits: cooking loss, pH and color of the belly or shoulder butt (p>0.05). Thirty-five flavor compounds comprising mainly fatty acids oxidation/degradation-derived products (e.g., aldehydes) and only few Maillard reaction-derived products (e.g., sulfur-and nitrogen-containing compounds) were identified. However, the QG showed a minor effect on the flavor profiles in both the belly and shoulder butt. Regarding the sensory quality, no effects of the QG were found on all the eating quality attributes (color, flavor, juiciness, tenderness and acceptability) for both the belly and shoulder butt cuts (p>0.05). Thus, it may be concluded that the current pork carcass grading standards do not reflect the real quality and value of the belly and shoulder butt cuts.

• Journal of Veterinary Science
• /
• v.22 no.5
• /
• pp.68.1-68.15
• /
• 2021

Background: Colistin and carbapenem-resistant bacteria have emerged and become a serious public health concern, but their epidemiological data is still limited. Objectives: This study examined colistin and carbapenem resistance in Escherichia coli and Salmonella from pigs, pig carcasses, and pork in Thailand, Lao PDR, and Cambodia border provinces. Methods: The phenotypic and genotypic resistance to colistin and meropenem was determined in E. coli and Salmonella obtained from pigs, pig carcasses, and pork (n = 1,619). A conjugative experiment was performed in all isolates carrying the mcr gene (s) (n = 68). The plasmid replicon type was determined in the isolates carrying a conjugative plasmid with mcr by PCR-based replicon typing (n = 7). The genetic relatedness of mcr-positive Salmonella (n = 11) was investigated by multi-locus sequence typing. Results: Colistin resistance was more common in E. coli (8%) than Salmonella (1%). The highest resistance rate was found in E. coli (17.8%) and Salmonella (1.7%) from Cambodia. Colistin-resistance genes, mcr-1, mcr-3, and mcr-5, were identified, of which mcr-1 and mcr-3 were predominant in E. coli (5.8%) and Salmonella (1.7%), respectively. The mcr-5 gene was observed in E. coli from pork in Cambodia. Two colistin-susceptible pig isolates from Thailand carried both mcr-1 and mcr-3. Seven E. coli and Salmonella isolates contained mcr-1 or mcr-3 associated with the IncF and IncI plasmids. The mcr-positive Salmonella from Thailand and Cambodia were categorized into two clusters with 94%-97% similarity. None of these clusters was meropenem resistant. Conclusions: Colistin-resistant E. coli and Salmonella were distributed in pigs, pig carcasses, and pork in the border areas. Undivided-One Health collaboration is needed to address the issue.

• Korean Journal of Veterinary Service
• /
• v.25 no.1
• /
• pp.31-37
• /
• 2002

Major hazards existed in slaughterhouse are pathogenic microorganisms originated from intestinal microflora of slaughtered animals. This study was intended for the identification of microbial contamination sources during pork slaughtering in small plants. Total aerobic bacteria, Coliform group, Salmonella spp, Listeria monocytogenes, and Campylobacter jejuni/coli were isolated from the surface sample of pork carcasses. Contamination level among different sampling points of ham, belly and neck did not showed statistical differences. Therefore, the mixed sampling from belly and neck of carcass could be effective for microbiological monitoring. Isolation rates of pathogenic microorganisms showed Salmonella spp 20.9%, Listeria monocytogenes 10.5%, and Campylobacter jejuni/coli 8.1% from 296 sampling points. High prevalence rate of Salmonella spp indicated that the contamination of intestinal microflora occurred due to unsanitary processing control, which required HACCP system in small plants. It was recommended that the prerequisite program should be a key factor for a successful HACCP system implementation especially in small size slaughterhouse.

• Journal of Biosystems Engineering
• /
• v.39 no.3
• /
• pp.174-183
• /
• 2014

Purpose: A robust, efficient auto-grading computer vision system for meat carcasses is in high demand by researchers all over the world. In this paper, we discuss our study, in which we developed a system to speed up line processing and provide reliable results for pork grading, comparing the results of our algorithms with visual human subjectivity measurements. Methods: We differentiated fat and lean using an entropic correlation algorithm. We also developed a self-designed robust segmentation algorithm that successfully segmented several porkcut samples; this algorithm can help to eliminate the current issues associated with autothresholding. Results: In this study, we carefully considered the key step of autoextracting lean tissue. We introduced a self-proposed scheme and implemented it in over 200 pork-cut samples. The accuracy and computation time were acceptable, showing excellent potential for use in online commercial systems. Conclusions: This paper summarizes the main results reported in recent application studies, which include modifying and smoothing the lean area of pork-cut sections of commercial fresh pork by human experts for an auto-grading process. The developed algorithms were implemented in a prototype mobile processing unit, which can be implemented at the pork processing site.