• 제목/요약/키워드: Pore pressure coefficient

검색결과 113건 처리시간 0.02초

다양한 응력조건을 고려한 새로운 압밀계수 평가방법 (A New Method for Estimating the Coefficient of Consolidation in Various Stress Conditions)

  • 곽찬문;정영훈;김창엽;정충기
    • 한국지반공학회논문집
    • /
    • 제21권5호
    • /
    • pp.25-32
    • /
    • 2005
  • 일반적으로 압밀계수는 일차원 압밀이론에 근거한 표준압밀시험을 이용하여 평가된다 하지만 실제 현장에서는 압밀 중 3차원적으로 응력 및 변형이 발생하게 된다. 본 연구에서는 실제 현장에서 발생 가능한 다양한 응력-변형 조건을 고려한 새로운 압밀계수 평가방법을 제안하였다. 제안된 방법에 의한 과잉간극수압 소산양상 예측 결과는 실측치와 매우 잘 일치하였으며, 따라서 본 연구에서 제안된 방법을 이용하는 경우 지반의 압밀 속도를 보다 정확하게 예측할 수 있을 것으로 판단된다.

Phenol removal by tailor-made polyamide-fly ash composite membrane: Modeling and optimization

  • Vandana, Gupta;Anandkumar, J.
    • Membrane and Water Treatment
    • /
    • 제10권6호
    • /
    • pp.431-440
    • /
    • 2019
  • A novel composite membrane was synthesized using crosslinked polyamide and fly ash ceramic substrate for phenol removal. Glutaraldehyde was used as crosslinker. Characterization shows that synthesized membrane possesses good permeability ($0.184l.m^{-2}.h^{-1}.kPa^{-1}$), MWCO (1.7 kDa), average pore size (1.08 nm) and good chemical stability. RSM was adopted for phenol removal studies. Box-Behnken-Design using quadratic model was chosen for three operating parameters (feed phenol concentration, pH and applied pressure) against two responses (phenol removal, flux). ANOVA shows that model is statistically valid with high coefficient of determination ($R^2$)value for flux (0.9897) and phenol removal (0.9302). The optimum conditions are obtained as pH 2, $46mg.l^{-1}$ (feed phenol concentration) and 483 kPa (applied pressure) with 92.3% phenol removal and $9.2l.m^{-2}.h^{-1}$ flux. Data validation with deviation of 4% confirms the suitability of model. Obtained results reveal that prepared composite membrane can efficiently separate phenol from aqueous solution.

피에조 콘 시험과 실내시험을 이용한 양산점토의 투수특성 평가 (Evaluation of Permeability Characteristics of Yangsan Clay using Piezocone Penetration Tests and Laboratory Tests)

  • 구남실;김영민;박재환
    • 한국지반환경공학회 논문집
    • /
    • 제12권12호
    • /
    • pp.47-54
    • /
    • 2011
  • 점성토 지반의 거동은 압축성뿐만 아니라 투수특성에 크게 영향을 받으며, 특히, 투수특성은 흙의 특성, 이방성에 따라 다르게 나타난다. 투수계수는 주로 실내 압밀시험과 현장 피에조 콘 시험으로부터 산정이 가능하다. 피에조 콘에 의한 투수계수 산정방법은 과잉간극수압의 소산시험 결과로부터 추정할 수 있다. 본 논문에서는 간극수압 소산시험 및 실내시험결과(Oedometer test)를 이용하여 기존의 투수성 평가에 이용되는 이론 해들의 적용성을 검토하고자 하며, 점성토지반 특성에 따른 ${k_{h}/k_{v}}$의 변화를 파악하여 원위치 ${k_{h}/k_{v}}$를 합리적으로 추정할 수 있는 적합한 해를 선정하였다. 연구대상지반은 경남 양산물금 지역의 점성토층이며 원위치 시험인 피에조 콘 소산시험과 비교란 시료에 대한 실내압밀시험(Oedometer test)을 실시하고 각 투수계수 추정해 별로 비교 분석을 실시하였다. 연구결과 피에조 콘 소산시험으로 산정된 투수계수비가 5.85로 나타나 실내시험(Rowe cell/Oedometer)으로 산정된 투수계수비 5.28과 매우 유사한 값을 나타냈다.

Time-dependent compressibility characteristics of Montmorillonite Clay using EVPS Model

  • Singh, Moirangthem Johnson;Feng, Wei-Qiang;Xu, Dong-Sheng;Borana, Lalit
    • Geomechanics and Engineering
    • /
    • 제28권2호
    • /
    • pp.171-180
    • /
    • 2022
  • Time-dependent stress-strain behaviour significantly influences the compressibility characteristics of the clayey soil. In this paper, a series of oedometer tests were conducted in two loading patterns and investigated the time-dependent compressibility characteristics of Indian Montmorillonite Clay, also known as black cotton soil (BC) soil, during loading-unloading stages. The experimental data are analyzed using a new non-linear function of the Elasto-Visco-Plastic Model considering Swelling behaviour (EVPS model). From the experimental result, it is found that BC soil exhibits significant time-dependent behaviour during creep compared to the swelling stage. Pore water entrance restriction due to consolidated overburden pressure and decrease in cation hydrations are responsible factors. Apart from it, particle sliding is also evident during creep. The time-dependent parameters like strain limit, creep coefficient and Cαe/Cc are observed to be significant during the loading stage than the swelling stage. The relationship between creep coefficients and applied stresses is found to be nonlinear. The creep coefficient increases significantly up to 630 kPa-760 kPa (during reloading), and beyond it, the creep coefficient decreases continuously. Several parameters like loading duration, the magnitude of applied stress, loading history, and loading path have also influenced secondary compressibility characteristics. The time-dependent compressibility characteristics of BC soil are presented and discussed in detail.

벤토나이트 혼합율에 따른 제강 슬래그 및 슬러지의 투수 특성 변화 (Characteristics of Saturated Hydraulic Conductivity in Steel Making Slag and Sludge according to Mixing Rate of Bentonite)

  • 우원재
    • 한국환경복원기술학회지
    • /
    • 제3권1호
    • /
    • pp.52-61
    • /
    • 2000
  • Permeability is important factor in the geotechnical problems, such as seepage discharge and dissipation of excess pore water pressure. The Kozeny-Carman equation works well for graded soils but serious discrepancies are found in clays. Major factor for these discrepancies is the tortuous flow path and unequal pore size. To estimate the permeability of fine grained soils, a permeability equation in which swelling potential is coupled with Kozeny-Carman equation is proposed in this study. To verify proposed equation, a series of variable head permeability test was carried out for steel making slag and sludge mixed with bentonite. The coefficients of permeability which is measured in the laboratory is compared with the values by the proposed equation. From the comparison, it is shown that the proposed equation can predict the coefficient of permeability of clays with satisfaction. As steel making slag and sludge is industry waste, it is reused as material of road foundation and cement but the rate of use is low. It mixed sodium-bentonite with high swelling property and permeability decrease effect. Then, Admixture investigates reuse possibility as liner of waste fill.

  • PDF

Effects of freezing and thawing on retaining wall with changes in groundwater level

  • Kim, Garam;Kim, Incheol;Yun, Tae Sup;Lee, Junhwan
    • Geomechanics and Engineering
    • /
    • 제24권6호
    • /
    • pp.531-543
    • /
    • 2021
  • Freezing and thawing of pore water within backfill can affect the stability of retaining wall as the phase change of pore water causes changes in the mechanical characteristics of backfill material. In this study, the effects of freezing and thawing on the mechanical performance of retaining wall with granular backfill were investigated for various temperature and groundwater level (GWL) conditions. The thermal and mechanical finite element analyses were performed by assigning the coefficient of lateral earth pressure according to phase change of soil for at-rest, active and passive stress states. For the at-rest condition, the mobilized lateral stress and overturning moment changed markedly during freezing and thawing. Active-state displacements for the thawed condition were larger than for the unfrozen condition whereas the effect of freezing and thawing was small for the passive condition. GWL affected significantly the lateral force and overturning moment (Mo) acting on the wall during freezing and thawing, indicating that the reduction of safety margin and wall collapse due to freezing and thawing can occur in sudden, unexpected patterns. The beneficial effect of an insulation layer between the retaining wall and the backfill in reducing the heat conduction from the wall face was also investigated and presented.

터널해석에 있어 지하수 거동의 중요성 (Significance of Ground Water Movements in the Numerical Modelling of Tunnelling)

  • 신종호
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.257-264
    • /
    • 2003
  • Tunnelling in water bearing soils influences the ground water regime. It has been indicated in the literature that the existence of ground water above a tunnel influences tunnel stability and the settlement profile. Only limited research, however, has been done on ground water movements around tunnels and their influence on tunnel performance. Time dependent soil behaviour can be caused by the changes of pore water pressure and/or the viscous properties of soil(creep) under the stress change resulting from the advance of the tunnel face. De Moor(1989) demonstrated that the time dependent deformations due to tunnelling are mainly the results of pore pressure dissipation and should be interpreted in terms of effective stress changes. Drainage into tunnels is governed by the permeability of the soil, the length of the drainage path and the hydraulic boundary conditions. The potential effect of lime dependent settlement in a shallow tunnel is likely to occur rapidly due to the short drainage path and possibly high coefficient of consolidation. Existing 2D modelling methods are not applicable to these tunnelling problems, as it is difficult to define empirical parameters. In this paper the time-based 2D modelling method is adopted to account for the three dimensional effect and time dependent behaviour during tunnel construction. The effect of coupling between the unloading procedure and consolidation during excavation is profoundly investigated with the method. It is pointed out that realistic modelling can be achieved by defining a proper permeability at the excavation boundary and prescribing appropriate time for excavation Some guidelines for the numerical modelling of drained and undrained excavation has been suggested using characteristic time factor. It is highlighted that certain range of the factor shows combined effect between the unloading procedure due to excavation and consolidation during construction.

  • PDF

남해안 준설매립 연약지반에 대한 압밀 물질함수 및 초기응력 산정 (Assessment on Consolidation Material Function and Initial Stress for Soft Ground by Hydraulic Fill the at Southern Coast of Korea)

  • 전제성;구자갑
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제15권4호
    • /
    • pp.136-145
    • /
    • 2011
  • 준설매립후 연직배수공법을 적용하여 지반개량을 수행하는 대규모 국가산업단지 조성 프로젝트를 대상으로, 각 심도별 채취된 불교란 시료를 이용하여 물리즉 특성 및 압밀 특성 등을 분석하기 위한 실내시험을 실시하였으며, 수평 압밀계수 및 현장 초기 응력 산정을 위한 콘 관입 및 소산시험을 수행하였다. 지층을 구성하고 있는 하부의 원지반 점토층과 상부의 준설 매립층은 유사한 해성점토로 구성되어 있으나, 초기 간극비와 초기 함수비, 초기 응력상태, 방향별 투수성과 압축성 등의 압밀특성에 있어서는 시간경과에 따른 압밀거동에 있어 매우 큰 차이를 보이는 다층 지반의 특성을 띠고 있다. 압밀과 관련된 응력이력이 다른 두지층의 초기응력을 산정하기 위하여 콘 관입시험 및 소산시험시의 간극수압 측정결과를 분석하였으며, 이를 통해 압밀이 진행중인 하부 원지반 점토층에서의 매립하중과 상부 성토에 의한 각 심도별 과잉간극수압 분포 및 이를 통한 초기응력을 산정할 수 있었다.

FILL DAM의 침하특성(沈下特性)에 관(關)한 연구(硏究) (A Study on the Settlement Characteristics of Fill Dam)

  • 문태완;강예묵
    • 농업과학연구
    • /
    • 제12권2호
    • /
    • pp.282-291
    • /
    • 1985
  • 점사(粘士)대신 화강암질풍화토(花崗岩質風化土)를 성토재료(盛土材料)로 사용(使用)할 경우(境遇) Fill Dam의 침하특성(沈下特性)을 구명(究明)하기 위하여 동재료(同材料)를 사용(使用)한 안동(安東)댐의 매설계기(埋設計器) 측정자료(測定資料)를 분석(分析)하여 얻은 결론(結論)을 요약(要約)하면 다음과 같다. 1. 시공중(施工中) Core zone의 침하(沈下)는 성토재하중(盛土載荷重)이 증가(增加)함에 따라 거의 직선적(直線的)인 증가현상(增加現象)을 보였으며 유효응력(有效應力)이 $7kg/cm^2$ 이하(以下)일 경우(境遇)의 침하율(沈下率)은 0.1~0.8% 범위(範圍)로 일반(一般) 점사(粘士)를 사용(便用)한 Fill Dam에서 보다 작은 값을 나타냈다. 2 하부(下部) Core zone의 침하(沈下)는 성토고(盛土高)의 약(約) 중심부(中心部) 이상(以上)에서 재구(載苟)되는 성토구중(盛土苟重)의 영향(影響)을 크게 받지 않는것으로 나타났다. 3. 간극수압(間隙水壓)은 투수계수(透水係數)가 클수록 저수지(貯水池) 상위(水位) 변화(變化)에 민감(敏感)한 반응(反應)을 보였으며 간극수압(間隙水壓)이 소산(消散)됨에 따라 침하(沈下)는 증가(增加)하는 경향(傾向)을 나타냈다. 4. 성토고(盛土高)의 하부(下部)에서 Zone 간(間)의 침하(沈下)는 상대밀도(相對密度)의 크기에 영향(影響)을 받는것으로 나타났으며 시공후(施工後)에는 압축(壓縮)두께가 큰 Core zone 에서 큰 경향(傾向)을 나타냈다. 5. 댐 정상(頂上)에서의 침하분포(沈下分布)는 댐의 최대단면(最大斷面)인 중심부(中心部)에서 크고 양안(兩岸)으로 갈수록 작게 나타났다.

  • PDF

현장시험에 의한 Smear Zone의 평가 (A Study on the Evaluation of Smear Zone by In-situ Tests)

  • 이장덕;구자갑
    • 한국지반공학회논문집
    • /
    • 제19권6호
    • /
    • pp.207-216
    • /
    • 2003
  • 본 논문에서는 국내 서해안 연약 지반 현장에서 PBD 타설로 인한 교란 영역을 확인하기 위하여 현장지반에 10개의 간극수압계를 PBD 타설 위치로부터 10cm, 20cm, 30cm, 40cm 그리고 50cm 그리고 50cm 떨어져 설치하고 멘드렐을 이용한 PBD 강제 관입시 발생하는 과잉간극수압의 소산과정을 5m, 7m 깊이에서 측정하였다. PBD 타설로 인해 지반교란이 발생하면 연약점토 지반의 투수계수가 감소하게 되어 과잉간극수압의 소산시간에 영향을 미치게 되므로 PBD 타설거리로부터 PBD 타설 전후의 과잉간극수압 소산과정을 측정하여 Smear Zone의 범위를 정하였다. 또한 이러한 과잉간극수압 소산과정을 해석하여 PBD타설 전후의 지반 배수특성저하를 규명하였다. 과잉간극수압 소산을 해석하기 위하여 시험 지반의 강성지수가 필요한데 이러한 강성지수 측정을 위하여 Cone-Pressuremeter(CPM)시험을 병행하였다. 시험결과 멘드렐의 환산직경의 3.0-3.6배에 Smear Zone이 형성되는 것으로 조사되었으며 Teh & Houlsby의 식과 CPM을 이용한 수평압밀계수를 평가한 결과 PBD타설전후로 지반의 배수능력이 3-8배 저하된 것으로 계산되었다.