• 콘크리트학회지
• /
• 제7권4호
• /
• pp.109-118
• /
• 1995

콘크리트의 침투성은 내구성과 밀접한 관계가 있고, 콘크리트의 내구성은 침투성 특성에 의해서 간접적으로 측정될 수 잇다. 실험 결과에 의하면 콘크리트의 침투성에서 플라이애쉬의 양이 증가할수록 (15%, 30%, 그리고45%) 침투성이 낮아졌으며, 기건양생한 콘크리트가 수중양생한 것에 비해서 월등히 높은 침투성을 보여 주었으나. 그 차이점은 플라이애쉬를 섞는 양이 많을수록 줄어 들었다. 높은 비율의 플라이애쉬(45%) 다양한 조강 시멘트를 섞어 만든 콘크리트에서도, 플라이애쉬 콘크리트가 보통(PCI)콘크리트보다 낮은 침투성을 보여주었다. 콘크리트는 양생기간이 길어짐에 따라 시멘트종류에 관계없이 침투성이 낮아졌으나, 기건양생시에는 증가하는 것을 보여주었다. 침투성 특징에서 모든 콘크리트는 물을 이용해 시험한 것이 기체를 이용해 시험한 것 보다 항상 낮은 값을 갖는다는 것이 발견되었다. 콘크리트의 침투성은 그것의 강도가 증가함으로써 줄어드는 것을 발견하였으나, 침투성의 특징은 주로 사용한 시멘트종류와 좀더 밀접한 관계가 있는 것으로 나타났다.

• Journal of Pharmaceutical Investigation
• /
• 제36권1호
• /
• pp.39-44
• /
• 2006

Tamsulosin or a salt thereof such as its hydrochloride salt has been known to have an adrenaline ${\alpha}$ receptor blocking action for urethra and prostate areas. It has been widely used as a drug which lowers the prostate pressure and improves urinary disturbance accompanied by prostate-grand enlargement, thus for the treatment of prostatic hyperplasia. To avoid dose-dependent side effects of tamsulosin upon oral administration, the development of sustained-release delivery system is essentially required, that can maintain therapeutic drug levels for a longer period of time. The aim of this study was therefore to formulate sustained-release tamsulosin granules and assess their formulation variables. We designed entric coated sustained-release tamsulosin granules for this purpose. Nano-pores in the outer controlled release membrane were needed in order to obtain initial tamsulosin release even in an acidic environment such as gastric region. In our sustained release osmotic granule system, hydroxypropylmethylcellulose in a drug-containing layer was used as a rate controller. The drug-containing granules were coated with hydroxypropylmethylcellulose phthalate (HPMCP) and Eudragit, along with glycerol triacetate as an aqueous nano-pore former. The release of tamsulosin depended heavily on the type of Eudragit such as RS, RL, NE 30D, used in the formulation of controlled release layer. These results obtained clearly suggest that the sustained-release oral delivery system for tamsulosin could be designed with satisfying drug release profile approved by the Korean Food and Drug Administration.

• 한국수소및신에너지학회논문집
• /
• 제28권5호
• /
• pp.521-530
• /
• 2017

Improving the microstructure of NiO/YSZ is one of several approaches used to enhance the electrical and mechanical properties of an anode support in Solid Oxide Fuel Cells (SOFCs). The aim of the work reported in this paper was to predict the relationship between these microstructural changes and the resulting properties. To this end, modification of the anode microstructure was carried out using different sizes of Poly (Methyl Methacrylate) (PMMA) beads as a pore former. The electrical conductivity and mechanical strength of these samples were measured using four-probe DC, and three-point bend-test methods, respectively. Thermal etching followed by high resolution SEM imaging was performed for sintered samples to distinguish between the three phases (NiO, YSZ, and pores). Recently developed image analysis techniques were modified and used to calculate the porosity and the contiguity of different phases of the anode support. Image analysis results were verified by comparison with the porosity values determined from mercury porosimetry measurements. Contiguity of the three phases was then compared with data from electrical and mechanical measurements. A linear relationship was obtained between the contiguity data determined from image analysis, and the electrical and mechanical properties found experimentally. Based upon these relationships we can predict the electrical and mechanical properties of SOFC support from the SEM images.

• 한국가정과학회지
• /
• 제5권1호
• /
• pp.48-61
• /
• 2002

This study was carried out to investigate the effects of four kinds of leavening agents on Jeung-Pyun fermantation. Milk-wine(M), fresh yeast(F), dry yeast(D), instant yeast(I) were used in Jeung-Pyun ingredients. The physicochemical properties, sensory evaluation were examined. The results of this study are summarized as follows: 1. Basic recipes for Jeung-Pyun by preliminary test were developed. 2. Specific volumes and expansion ratio of Jeung-Pyun was higher in the fresh yeast-added sample. 3. The pH of Jeung-Pyun was decreased significantly as the fermentation progressed 4. In the result comparing Jeung-Pyun extracting after 1st fermentation with Jeung-Pyun extracting 2nd fermentation by SEM, the former was widely distributed in stability of bubble and pore than the latter. 5. Standard recipe by Q.D.A. test added four kinds of leavening agents were as follows: (1)Jeung-Pyun added milk wine was 240min for 1st fermentation time, 60min for 2nd fermentation time, 35$^{\circ}C$ for fermentation temperature, 80% for fermentation humidity respectively. (2) Jeung-Pyun added fresh yeast was 90min for 1st fermentation time, 40min for 2nd fermentation time, 35$^{\circ}C$ for fermentation temperature, 80% for fermentation humidity respectively. (3)Jeung-Pyun added dry yeast was 90min for 1st fermentation time, 60min for 2nd fermentation time, 35$^{\circ}C$ for fermentation temperature, 60% for fermentation humidity respectively. (4)Jeung-Pyun added instant yeast was 90min for 1st fermentation time, 40min for 2nd fermentation time, 30$^{\circ}C$ for fermentation temperature, 60% for fermentation humidity respectively. 6.Based on sensory evaluation, Jeung-Pyun added fresh yeast was significantry higher than others in color, sweetness, moistness, softness, and overall quality. There was negative significance between milk wine flavor and astrigentness, and yeast flavor.

• 한국세라믹학회지
• /
• 제43권12호
• /
• pp.768-774
• /
• 2006

The microstructure of Ni-YSZ cermets was controlled with fine and coarse starting powders (NiO and YSZ) to obtain a optimum strong and conductive tubular anode support for SOFCs. Three types of cermets with different microstructures, i.e., coarse Ni-fine YSZ, fine Ni-coarse YSZ, and fine Ni-fine YSZ, were fabricated to investigate their electrical and mechanical properties. The cermets from fine NiO powder showed high electrical conductivity due to the enhanced percolation of Ni particles. The cermet by foe Ni and coarse YSZ showed excellent electrical conductivity (>1000 S/cm) despite its high porosity $(\sim40%)$ but it showed poor mechanical strength due to the lack of percolation by YSZ particles and due to large pores. Thus fine NiO and YSZ powders were used to make strong and conductive Ni-YSZ support tube by extrusion. The microstructure of the anode tube was modified by the amount of polymeric additives and carbon black, a pore former. Ni-YSZ tube (porosity $\sim34%$) with the finer microstructure showed better performance both in electrical conductivity (>1000 S/cm) and fracture strength $(\sim140\;MPa)$. Either flat or circular NiO-YSZ tubes with the length from 20 to 40cm were successfully fabricated with the optimized composition of materials and polymeric additives.

• 한국수소및신에너지학회논문집
• /
• 제21권3호
• /
• pp.214-219
• /
• 2010

In this study, we fabricated tubular ceramic support for segmented-in-series solid oxide fuel cell (SOFC) by using CSZ(CaO-stabilized $ZrO_2$) as main material and activated carbon as pore former. Thermal expansion properties of ceramic support with different amounts of activated carbon were analyzed by using dilatometer to decide a suitable sintering temperature. The tubular ceramic supports with different amounts of activated carbon (5, 10, 15wt.%) were fabricated by the extrusion technique. After sintering at $1100^{\circ}C$ and $1400^{\circ}C$ for 5h., cross section and surface morphology of tubular ceramic support were analyzed by using SEM image. Also, the porosity, mechanical property, gas permeability of tubular ceramic supports was measured. Based on these results, we established the suitable fabrication technique of tubular ceramic support for segmented-in-series SOFC.

• Geomechanics and Engineering
• /
• 제24권6호
• /
• pp.519-529
• /
• 2021

In coal mining activities, the abutment stress of the coal has to undergo cyclic loading and unloading, affecting the strength and seepage characteristics of coal; additionally, it can cause dynamic disasters, posing a major challenge for the safety of coal mine production. To improve the understanding of the dynamic disaster mechanism of gas outburst and rock burst coupling, triaxial devices are applied to axial pressure cyclic loading-unloading tests under different axial stress peaks and different pore pressures. The existing empirical formula is use to perform a non-linear regression fitting on the relationship between stress and permeability, and the damage rate of permeability is introduced to analyze the change in permeability. The results show that the permeability curve obtained had "memory", and the peak stress was lower than the conventional loading path. The permeability curve and the volume strain curve show a clear symmetrical relationship, being the former in the form of a negative power function. Owing to the influence of irreversible deformation, the permeability difference and the damage of permeability mainly occur in the initial stage of loading-unloading, and both decrease as the number of cycles of loading-unloading increase. At the end of the first cycle and the second cycle, the permeability decreased in the range of 5.777 - 8.421 % and 4.311-8.713 %, respectively. The permeability decreases with an increase in the axial stress peak, and the damage rate shows the opposite trend. Under the same conditions, the permeability of methane is always lower than that of helium, and it shows a V-shape change trend with increasing methane pressures, and the permeability of the specimen was 3 MPa > 1 MPa > 2 MPa.

• 대한화학회지
• /
• 제33권1호
• /
• pp.135-142
• /
• 1989

HZSM-5를 觸媒로 하여 메탄올과 이소부틸렌으로부터 Methyl tertiary butyl ether(MTBE)의 氣相合成實驗을 하였으며, zeolite 觸媒의 SiO$_2/Al_2O_3$ 比 및 反應條件의 영향을 硏究하였다. 각 觸媒들은 pyridine을 吸着시켜 temperature programmed desorption(TPD) 및 IR法으로 酸點의 세기와 特性을 조사하였으며, 승온탈착실험을 통하여 각 反應物 및 生成物의 吸着特性을 검토하였다. HZSM-5의 SiO$_2/Al_2O_3$比가 증가할수록 强한 酸點의 수는 감소하여 메탄올의 脫水反應은 억제되고 MTBE에 대한 선택도가 증가하였다. MTBE에 대한 전환율과 선택도는 $i-C_4H_8$의 細孔內 확산저항에 의하여 큰 영향을 받음을 알 수 있었다. MTBE合成反應은 發熱的이어서, 전반적으로 80$^{\circ}$C의 반응온도가 合成에 적합하였다. 한편 각 觸媒上에 生成된 coke의 特性을 TG, DTA 및 IR spectrum으로 측정하였다. 침착된 coke의 量은 HY > H-Mordenite > HZSM-5順이었으며, H-Mordenite에 있어서는 누적된 coke의 양이 HZSM-5보다 현저하지는 않았으나, 細孔의 配向이 1方向性이므로 반응시간이 길어짐에 따라 심한 活性減退가 일어났다. HY는 큰 細孔을 가지고 있어 M$i-C_4H_8$의 重合이 쉽게 일어났으며, HZSM-5에 비하여 많은 coke의 참착과 빠른 活性減退를 나타내었다.

• 멤브레인
• /
• 제15권4호
• /
• pp.272-280
• /
• 2005

본 연구에서는 NMP용매를 사용하여 폴리술폰 용액을 캐스팅 하고 상전이 방법으로 비대칭성 폴리술폰 막을 제조하였다. 비대칭성 폴리술폰 막 제조 시 응고조로 물과 알코올(메탄올, 에탄올, 프로판올) 수용액을 사용하였다. 폴리술폰 막의 수투과도와 다공도를 조절하는 인자로 서로 다른 용해도 계수를 갖는 알코올의 영향에 대한 특성을 평가하였다. 알코올 응고조에서 제조된 비대칭성 폴리술폰 막은 전형적인 sponge-like 구조를 나타내었으며 물 응고조에서 제조된 폴리술폰 막은 알코올 응고조에서 제조된 폴리술폰 막보다 낮은 수투과도를 나타내었다. 물과 알코올의 혼합 응고조에서 생성된 비대칭성 폴리술폰 막은 finger-like 구조와 sponge-like 구조가 혼재되어 있음을 확인할 수 있었다. 즉, sponge-like 구조의 폴리술폰 막은 상전이 속도가 감소함에 따라 다공도가 현저하게 감소함을 알 수 있었다. 그 결과 물 응고조에서 제조된 폴리술폰 막의 수투과도는 14.7 psi에서 164 [$L/m^2hr$] 이고 메탄을 응고조와 에탄을 응고조에서 제조된 폴리술폰 막은 각각 56 [$L/m^2hr$]과 30 [$L/m^2hr$]를 나타내었다.

• 콘크리트학회논문집
• /
• 제14권1호
• /
• pp.118-125
• /
• 2002

콘크리트는 수화과정을 통하여 재료가 성숙되고, 경화된다. 수화의 진행은 엄밀한 의미에서 재령에 의하지 않고 수화도에 의해 제어되므로, 경화가 진행되는 콘크리트의 모든 재료특성과 미세구조 형성과정은 수화도에 의해 정식화되는 것이 바람직하다. 기존 연구는 주로 양생온도가 수화발열속도에 미치는 영향을 고려한 반응함수 개념을 주로 사용하였고, 또한 내부 수분상태의 영향을 습도함수의 형태로 고려한 연구결과는 실제 수화기구를 반영하지 못하고 단지 각 연구자의 실험조건과 배합조건에만 부합하는 결과를 보인다. 따라서 본 연구는 기존 제안식의 단점을 보완하기 위하여 수화기구와 미세구조 형성 과정에 기초하여 반응속도함수를 모델링하였다. 수화반응속도는 온도 및 수분상태에 따라 변화하므로, 본 연구에서는 수화발열 속도에 영향을 미치는 인자로, 시멘트 종류, 물-시멘트비 등의 배합특성과 양생온도 빛 세공조직의 내부수분상태를 고려하였다. 똔 연구에서 제시한 콘크리트의 수화도 예측모델은 기존의 온도영향만을 주로 고려하는 반응속도함수를 콘크리트내부의 수분분포 상태를 고려하여 모델을 개선하였으며, 이는 실제 측정한 수화도에 매우 근접하여 그 유용성을 검증하였다. 또한 수화도의 정의와 제시한 모델을 이용하여 콘크리트 요소내의 온도, 습도 덴 수화도를 수치적으로 결정하여 단열온도상승곡선을 정확히 모사 할 수 있었다. 제안된 모델은 수화가 진행되는 콘크리트의 여러 역학적 특성 및 미세구조 형성과정을 적절히 표현하고, 수화과정이 온도 및 습도상태를 결정하는 초기재령 콘크리트의 단면 내 온 습도상태를 추정하여 궁극적으로 초기재령 콘크리트의 균열 위험성을 평가하는데 유용하게 이용될 수 있을 것으로 사료된다.