• 공업화학
• /
• 제30권5호
• /
• pp.633-638
• /
• 2019

실내공기질 중 지하시설은 휘발성유기화합물(VOC, volatile organic compound)의 처리가 미흡한 실정이며, 이를 환기와 같은 확산법이 아닌 오염물질 저감하기 위하여 다양한 제조, 활성화법을 이용해 메탈 필터에 흡착성을 부여한 제올라이트 코팅 흡착 필터소재를 제조하였다. 그 결과, 메탈폼 지지체 대비 약 2~20배 이상 흡착 성능의 증진을 확인하였으며 이는 기공의 증진에 기반함을 SEM 분석으로 확인하였다. 또한 리그닌을 첨가함에 따라 13.95 mg/g의 흡착 성능을 확보하였으며, 세척 후에도 평균 13.25 mg/g의 유사한 흡착 성능을 확보하여 높은 내구성을 가진 흡착 필터소재를 제조하였음을 확인하였다. 개발된 흡착 필터소재는 지하시설 내 기계적 환기로의 농도 저감이 아닌 근본적으로 VOCs를 제어할 수 있는 해결방법으로 제시할 수 있을 것으로 판단하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 춘계 총회 및 학술발표회
• /
• pp.31-38
• /
• 2003

A pilot scale biofilter pretreatment-microfiltration system (BF-MF) was operated to investigate the effect of biofilter treatment in fouling reduction of microfiltration. Biofiltration was expected to reduce the membrane fouling by removal of turbidity and metal oxides. The hollow-fiber MF module with a nominal pore size of 0.1$\mu$m and a surface area of 8m$^2$ was submerged in a filtration tank and microfiltration was operated at a constant flux of 0.5 m/d. Biofiltration using polypropylene pellets was performed at a high filtration velocity of 320 m/d. Two experimental setups composed of MF and BF/MF, i.e., without and with biofilter pretreatment, were compared. Throughout the experimental period of 9 months, biofilter pretreatment was effective to reduce the membrane fouling, which was proved by the result of time variations of trans-membrane pressure and backwash conditions. The turbidity removal rate by biofiltration varied between 40% to 80% due to the periodic washing for biofilter contactor and raw water turbidity. In addition to turbidity, metals, especially Mn, Fe and Al were removed effectively with average removal rates of 89.2%, 67.8% and 64.9%, respectively. Further analysis of foulants on the used membranes revealed that turbidity and metal removal by biofiltration was the major effect of biofiltration pretreatment against microfiltration fouling.

• 한국환경과학회지
• /
• 제22권10호
• /
• pp.1353-1361
• /
• 2013

The objectives of this paper are the characterization of the pretreatment of wastewater by microfiltration (MF) membranes for river maintenance and water recycling. This is done by investigation of the proper coagulation conditions, such as the types and doses of coagulants, mixing conditions (velocity gradients and mixing periods), pH, etc., using jar tests. The effluent water from a pore control fiber (PCF) filter located after the secondary clarifier at Kang-byeon Sewage Treatment Plant (K-STP) was used in these experiments. Two established coagulants, aluminum sulfate (Alum) and poly aluminum chloride (PAC), which are commonly used in sewage treatment plants to treat drinking water, were used in this research. The results indicate that the optimal coagulation velocity gradients (G) and agitation period (T) for both Alum and PAC were 200-250 $s^{-1}$ and 5 min respectively, but the coagulation efficiencies for both Alum and PAC were lower at low values of G and T. For a 60 min filtration period on the MF, the flux efficiencies ($J/J_0$ (%)) at the K-STP effluent that were coagulated by PAC and Alum were 92.9 % and 79.9 %, respectively, under the same coagulation conditions. It is concluded that an enhanced membrane process is possible by effective filtration of effluent at the K-STP using the coagulation-membrane separation process.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.325-326
• /
• 2006

Using $6wt%Y_2O_3-2wt%Al_2O_3$ as sintering additives and Si as a raw powder, the continuously porous in-situ $Si_2N_2O-Si_3N_4$ bodies were fabricated by multi-pass extrusion process and their microstructures were investigated depending on the addition of carbon (0-9wt%) in the mixture powder. The introduction of $Si_2N_2O$ fibers observed in the unidirectional continuous pores as well as in the pore-frame regions of the nitrided bodies can be an effective method in increasing the filtration efficiency. In the case of no carbon addition, the network type $Si_2N_2O$ fibers with high aspect ratio appeared in the continuous pores with diameters of 150-200 nm. However, in the case of 9wt% C addition, the fibers were found without any network type and had diameters of 200-250 nm.

• Preventive Nutrition and Food Science
• /
• 제17권2호
• /
• pp.152-157
• /
• 2012

This study was performed to increase the availability of Sedum sarmentosum (Dolnamul) and to improve the nutraceutical value of rice cakes (sulgitteok). The contents of crude protein, mineral, dietary fiber, water holding capacity, and hardness significantly and directly increased with lyophilized sedum powder (SP). Pore ratio and expansion rate decreased in samples containing more than 10% SP compared to the control. In a sensory evaluation, a positive correlation was detected between overall acceptability and taste ($R^2$=0.99, p<0.01), and color ($R^2$=0.72, p<0.05). Total polyphenol contents of the SP-treated groups were significantly elevated, accompanied by an increase in radical scavenging ability estimated by the 1,1-diphenyl-2-picrylhydrazyl (DPPH) assay. Replacing 10% of the rice powder with SP efficiently improved the antioxidant and nutritional values of sulgitteok as well as its the sensory quality.

• Macromolecular Research
• /
• 제14권5호
• /
• pp.552-558
• /
• 2006

Biodegradable nanofibrous poly(L-lactic acid) (PLLA) scaffold was prepared by an electrospinning process for use in tissue regeneration. The nanofiber scaffold was treated with oxygen plasma and then simultaneously in situ grafted with hydrophilic acrylic acid (AA) to obtain PLLA-g-PAA. The fiber diameter, pore size, and porosity of the electrospun nanofibrous PLLA scaffold were estimated as $250\sim750nm,\;\sim30{\mu}m$, and 95%, respectively. The ultimate tensile strength was 1.7 MPa and the percent elongation at break was 120%. Although the physical and mechanical properties of the PLLA-g-PAA scaffold were comparable to those of the PLLA control, a significantly lower contact angle and significantly higher ratio of oxygen to carbon were notable on the PLLA-g-PAA surface. After the fibroblasts were cultured for up to 6 days, cell adhesion and proliferation were much improved on the nanofibrous PLLA-g-PAA scaffold than on either PLLA film or unmodified nanofibrous PLLA scaffold. The present work demonstrated that the applications of plasma treatment and hydrophilic AA grafting were effective to modify the surface of electrospun nanofibrous polymer scaffolds and that the altered surface characteristics significantly improved cell adhesion and proliferation.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권3호
• /
• pp.111-118
• /
• 2019

본 연구에서는 비정질강섬유의 혼입이 초고강도콘크리트의 폭렬특성에 미치는 영향이 실험적으로 검토되었다. 콘크리트는 압축강도 100과 150 MPa의 초고강도콘크리트가 사용되었다. 폴리프로필렌섬유는 0.15 vol%, 비정질강섬유는 0.3 및 0.5 vol%가 혼입되었다. 시험체는 콘크리트의 압축강도와 섬유혼입 조건에 따라 6수준이 제작되었고, ISO-834 가열곡선에 의해 가열되었다. 결과로써 폴리프로필렌섬유와 비정질강섬유가 혼입된 초고강도콘크리트의 폭렬제어에 있어서는 용융된 폴리프로필렌섬유가 형성하는 공극네트워크를 통해 수증기가 이동하는 효과가 지배적인 것으로 나타났다. 또한, 비정질강섬유 0.3v ol% 혼입률에서는 폭렬제어에 큰 영향을 미치지 않지만, 0.5 vol%의 비정질강섬유가 혼입될 경우에는 수증기가 이동할 수 있는 균열의 발생이 억제됨으로써 콘크리트 폭렬의 원인으로 지적되고 있는 수분막힘층(moisture clog)가 형성될 가능성이 높은 것을 확인할 수 있었다.

• 동아시아식생활학회지
• /
• 제17권6호
• /
• pp.903-910
• /
• 2007

In order to make acquire a potential use for Opuntia humifusa as a natural functional food material, this study was performed to determine the quality properties of Jeung-pyun made with added Opuntia humifusa, or prickly pear powder. According to an analysis of its major components, we found that the prickly pear powder consisteds of nitrogen-free extracts (71.85%) and crude fiber (11.20%). Greater additions of prickly pear powder had resulted in significantly lower pH in the of Jeung-pyun. According to measurements on the degree of Jeung-pyun gelatinization, by means of ${\beta}$-amylase, greater additions of prickly pear powder led to the higher levels of isolated maltose, indicating that the gelatinization degree of the Jeung-pyun became higher. Also, samples with higher concentrations of prickly pear powder had a tendency toward lower water content, which allowed us to expect a longer storage duration for the Jeung-pyun. In the textural property tests the Jeung-pyun that had less hardness and greater adhesiveness (p<0.05) than the control group as the content of prickly pear powder became higher. Also, the Jeung-pyunhad lower gumminess and chewiness than the control group as the content of prickly pear powder became higher. Therefore, it is possible to prepare relatively soft Jeung-pyun using prickly pear powder. For the color differences of the Jeung-pyun samples, lower L- values, and higher a- and b -values (p<0.05) presented as the addition level of prickly pear powder became higher. According to SEM observations of the Jeung-pyun, the added prickly pear powder addition groups generally showed a smaller and more inconsistent pore size, but higher porosity, than the control group. According to sensory analyses of the Jeung-pyun, the P2 group scored highest for color item, and the P4 group generated the fermented scent. Higher additions content of prickly pear powder led to the lower score, but higher scores for adhesiveness. Finally, the P2 group achieved the highest score for overall taste.

• 동물자원연구
• /
• 제30권3호
• /
• pp.111-120
• /
• 2019

생물학적 평가 방법 중 in situ와 in vitro 평가 방법은 비용 및 시간을 절약할 수 있으며 동물 복지 측면에서 제약이 적어 주목되고 있는 방법이다. In vitro 실험에서 사용되는 사료 접종법으로 배양병에 직접 사료를 담는 dispersion 방법은 실제 반추위 발효 상황에 근접한 조건에서 실험할 수 있는 장점이 있지만, 시간과 노동력이 많이 소모된다. 반대로 사료 주머니를 이용한 방법은 실험 수행의 편이성이 있지만 첨가제 실험 수행의 제약이 있으며, 미생물 활성과 섬유소 소화율이 저하되는 단점이 있다. 본 실험은 dispersion 방법과 사료 주머니 방법을 조합하여 보다 편리한 방법으로 dispersion 에 가까운 높은 재현성의 발효 성상과 소화율 평가 가능할 것이라고 생각하여 in vitro 발효 성상과 미생물 조성을 비교하였다. Dispersion 방법과 nylon bag 을 조합한 실험에서 건물 소화율은 세척 과정에서 미생물 및 사료 입자의 유실로 과대평가될 수 있지만 이론적 최대 가스 발생량 V_max, 가스 발생량에 대한 분해 속도 상수 K_g 에서 유의적 차이가 나타나지 않으며, IVNDFD, pH, NH₃-N, total VFA 발생량 그리고 VFA 조성에서도 유의적 차이가 나지 않았다. Real-time PCR 을 이용한 미생물 조성 분석에서는 general bacteria의 절대량에서 유의적 차이가 나지 않았다. 상기의 결과를 종합해 볼 때, in vitro 실험에서 사료 주머니의 사용은 충분히 적용가능하며 일반적인 방법인 dispersion과 비교해 볼 때, 영양소 이용에 있어 반추미생물의 사료 접촉을 방해하지 않을 것으로 생각된다. 하지만 in vitro bach culture 방법은 배양조건에서 제약이 있어, 향후 연속 배양 방법과 in situ의 실험을 통해 본 실험의 실험결과에 대한 추가적인 규명이 필요할 것으로 사료된다.