• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.223-230
• /
• 2000

Sand drain as a vertical drainage is widely used in soft ground improvement. Recently, sand, the principal source of sand drain, is running out. The in-situ tests were carried out to utilize gravel as a substitute for sand. In-situ tests area was divided into two areas by material used. One is Sand Drain(SD) and Sand Compaction Pile(SCP) area, the other is Gravel Drain(GD) and Gravel Compaction Pile(GCP) area. Both areas were monitored to obtain the information on settlement, pore water pressure and bearing capacity by measuring instruments for stage loading caused by embankment. The results of measurements were analyzed, The clogging effect was checked at various depth in gravel column after the test. According to the test results, the settlement was found to be smaller in gravel drain than in sand drain. The increase in bearing capacity by gravel pile explains the result. The clogging effect was not found in gravel column. It is assumed that gravel is relatively acceptable as a drainage material. Gravel is considered to be a better material than sand for bearing capacity, and it is found that bearing capacity is larger when gravel is used as a gravel compaction pile than as a gravel drain.

• Computers and Concrete
• /
• 제1권1호
• /
• pp.31-46
• /
• 2004

A methodology is presented for computing stresses in structural concrete members exposed to fire. Coupled heat and moisture migration simulations are used to establish temperature, pore pressure, and liquid-saturation state variables within near-surface zones of heated concrete members. Particular attention is placed on the use of coupled heat and multiphase fluid flow simulations to study phenomena such as moisture-clogging. Once the state variables are determined, a procedure for combining the effects of thermal dilation, mechanical loads, pore pressure, and boundary conditions is proposed and demonstrated. Combined stresses are computed for varying displacement boundary conditions using data obtained from coupled heat and moisture flow simulations. These stresses are then compared to stresses computed from thermal analyses in which moisture effects are omitted. The results demonstrate that moisture migration has a significant influence on the development of thermal stresses.

• 한국대기환경학회지
• /
• 제20권3호
• /
• pp.361-369
• /
• 2004

A metal fiber bed has seldom been applied to the practical filtration process despite its excellent mechanical and chemical stability. The filter-bed used in this work was highly porous with open structure, of which apparent porosity was 80 ∼ 90%. Although pressure loss across the filter-bed was very low, separation efficiency was found to be quite high. This paper focuses on the basic filtration mechanisms of a metal filter-bed and a thin ceramic filter from fly ash for reference. The experimental parameters were face velocity, dust loading and porosity of filter-bed. Pressure drop increased with increasing face velocity and dust feeding load for both filters. It also showed that dust particles deposited in the deep flow path, finally resulting in clogging the pore channels. It thereby indicates that the dominating mechanism of the metal filter-bed would be depth filtration. Meanwhile, the thin fly ash composite filters trapped the aerated dust mainly on the surface of the filter medium, so that the instantaneously formed dust layer might cause a steep increase of pressure drop across the filtration system.

• 한국지반공학회논문집
• /
• 제34권11호
• /
• pp.33-41
• /
• 2018

지반의 내부침식은 유체 흐름에 의하여 입자골격에 부착된 세립토가 이탈하는 현상이며, 지속적인 세립토의 유동은 지반구조물의 수리-역학적 특성을 약화시킨다. 본 논문은 세립토의 유동에 관한 지배방정식을 정립하고 수치해석 기법을 제안하였다. 공극내의 세립토는 액상의 세립토($c_e$), 조립토에 부착된 입자(${\sigma}_a$) 그리고 조립토골격에 폐색된 세립토(${\sigma}_s$)로 구분하여 상관계를 제시하였다. 이를 바탕으로 세립토의 유동과 공극수의 흐름에 대한 수리학적 지배방정식들과 유한요소 수식화를 제시하였다. 세립토의 이탈, 부착 그리고 공극막힘에 대한 구성 모델들을 제시하였으며, 실내 1차원 침식실험으로부터 모델변수를 도출하는 방법을 제안하였다. 그리고 세립토의 공극 막힘 현상에 의한 지반의 투수계수 변화에 대한 추정식을 제안하였다. 기존의 침식실험 결과에 대한 수치해석을 통하여 개발된 해석기법과 세립토 유동 모델의 적정성을 검증하였다.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.4033-4041
• /
• 2021

To better understand the permeability of uranium sandstone, improve the leaching rate of uranium, and explore the change law of pore structure characteristics and blocking mechanism during leaching, we systematically analyzed the microstructure of acid-leaching uranium sandstone. We investigated the variable rules of pore structure characteristics based on nuclear magnetic resonance (NMR). The results showed the following: (1) The uranium concentration change followed the exponential law during uranium deposits acid leaching. After 24 h, the uranium leaching rate reached 50%. The uranium leaching slowed gradually over the next 4 days. (2) Combined with the regularity of porosity variation, Stages I and II included chemical plugging controlled by surface reaction. Stage I was the major completion phase of uranium displacement with saturation precipitation of calcium sulfate. Stage II mainly precipitated iron (III) oxide-hydroxide and aluminum hydroxide. Stage III involved physical clogging controlled by diffusion. (3) In the three stages of leaching, the permeability of the leaching solution changed with the pore structure, which first decreased, then increased, and then decreased.

• 한국지반환경공학회 논문집
• /
• 제6권2호
• /
• pp.51-60
• /
• 2005

최근 우리나라는 석회산업의 부산물인 폐석회의 처리문제로 많은 분쟁이 발생하고 있다. 폐석회는 높은 함수비를 갖고 있어 이를 처리하기 위해서는 적절한 탈수과정이 선행되어야 한다. 본 연구는 연직배수공법을 활용하여 폐석회의 높은 함수비를 저하시키고 지반의 안정화를 촉진시키기 위한 효율적인 방안에 대하여 연구하였다. 즉, 폐석회 슬러지로 구성된 지반내에 기성연직 배수재를 설치하였을때, 압밀도와 간극수압의 소산, 침하량 변화, 지지력 증가를 평가하였다. 실험 결과를 고찰해 보면, PBD가 원형드레인 보다 압밀계수가 2배정도 크게 나타났다. 전반적으로 침하량과 간극수압의 소산, 통수량을 비교하면 두 방법이 서로 유사한 경향을 보이고 있으나, PBD가 원형드레인보다 초기 간극수가 더 효과적으로 배수되는 것을 알 수 있었다. 실내배수실험 후 SEM 촬영에 의한 배수재의 필터 층을 살펴보면, PBD에 비해 원형드레인의 필터가 막힘현상이 심한 것을 알 수 있었다. 폐석회지반의 지반개량효과와 간극수의 배수는 PBD가 우수하며, 원형드레인은 타설간격이 길고 PBD와 같은 섬유배열이 균질한 필터로 교환하여 사용할 때 효율성이 증대할 것이라 예상된다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
• /
• pp.745-748
• /
• 2000

Anaerobic digester coupled with hollow fiber membrane unit. Treatment of starch waste with anaerobic digester-membrane system was studied. $0.17\;m^2$ area of hollow fiber membrane unit of known pore size was immersed into laboratory-scale anaerobic digestion system. The gas production was about $0.74\;m^3/kg$ COD treated. The COD removal efficient was about 80-95% depending on the hydraulic retention time. Crossflow ultrafiltration as Post treatment to anaerobic filter. The study conducted with different membrane pore size indicated that membrane with 1,000,000 molecular weight cut-off size gave a higher COD removal efficiency in the range of 83-87% while giving a study flux of $120-130\;L/m^2\;{\cdot}\;h$. A study was conducted to see the long term clogging effect of membrane also.

• KSBB Journal
• /
• 제6권2호
• /
• pp.135-141
• /
• 1991

This study thus looks into two treatment processess : i) Anaerobic digester coupled with hollow fibre membrane unit. Treatment of starch waste with anaerobic digester-membrane system was studied. $0.17\m^2$ area of hollow fibre membrane unit of known pore size was immersed into laboratory-scale anaerobic digestion system. The pore size of membrane was varied from 0.03 to $\0.15mu$m. The hydraulic retention time of anaerobic digester was varied from 1.5 to 10 days. The effect of hydraulic retention time on treatment efficiency was significant while effect of membrane size was not significant. The gas production was about 0.74㎥/kg COD treated. The COD removal efficient was about 80-95% depending on the hydraulic retention time. ii ) Crossflow ultrafiltration as post treatment to anaerobic filter. The effluent from anaerobic filter, which had a total COD in the range of 4,500-5,200 mg/L was treated by crossflow ultrafiltration units. The study conducted with different membrane pore size indicated that membrace with 1,000,000 molecular weight cut-off size gave a higher COD removal efficiency in the range of 83-87% while giving a study flux of $120-130 L/\m^2$.h. A study was conducted to see the long term clogging effect of membrane also.

• 한국지반신소재학회논문집
• /
• 제8권2호
• /
• pp.41-46
• /
• 2009

본 논문에서는 연약지반개량을 위한 다짐말뚝공법들의 압밀촉진효과를 파악하기 위하여 일련의 실내모형실험을 실시하였다. 모형실험에서는 다짐말뚝의 재료로써 모래, 쇄석, 모래질 쇄석을 사용하여 치환율이 10%인 복합지반을 조성하였다. 각각의 복합지반에 하중을 재하 한 후 시간의 경과에 따른 침하량 및 점토부의 과잉간극수압 소산 거동을 관측하였으며 간극막힘 현상에 대한 검토를 위하여 압밀 종료 후 각각의 다짐말뚝에 대한 점토 혼입 양상을 관찰하였다. 실험 결과 쇄석다짐말뚝에 의한 침하저감효과와 압밀촉진효과가 가장 크게 나타났으며 압밀 종료 후 세 가지의 다짐말뚝 모두 점토의 혼입 양상은 관측되지 않았다.

• 한국지반공학회논문집
• /
• 제15권6호
• /
• pp.273-283
• /
• 1999

박테리아를 토양과 같은 다공성 매질에 주입시키고 적절한 기질과 영양분을 공급시키면 박테리아는 매질의 표면에 부착하여 성장하며 그 결과 공극의 크기가 감소하여 매질의 투수계수가 감소되고 입자간 마찰계수가 증가한다. 본 연구는 투수계수가 비교적 큰 모래와 화강풍화토에 박테리아를 접종, 배양한 후 투수계수의 변화를 측정하였으며, 배양된 바이오필름의 내화학성 및 온도변화에 대한 내구성 실험을 통해 대용 차수재로의 가능성을 평가하였다. 화강풍화토에 박테리아를 접종, 배양한 후 투수계수는 초기치와 비교하여 약 1/50 정도의 감소를 나타냈고, 산성 또는 염기성용액의 침투 이후에도 투수계수의 급격한 증가는 나타나지 않았다. 그러나 반복적인 동결-융해후 투수계수가 증가해 바이오필름으로 인한 공극의 폐색이 손상될 수 있음을 알 수 있었다.