• 한국농공학회논문집
• /
• 제55권2호
• /
• pp.87-95
• /
• 2013

The aim of this study is to examine the behavior of reservoir fill dam with the water level raising by use of the centrifugal model test and the numerical simulation. In this study, LIQCA2D-SF based on the cyclic elasto-plastic constitutive model proposed by Oka et al. (1999) is applied for numerical simulation. In order to investigate the displacements and the pore water pressures in the fill dam due to the water level raising velocity, three model tests in centrifugal field of 50g for fill dams were conducted. A comparison between the test result and the simulation result has provided the influence on the displacement and the pore water pressure of the fill dam with increasing up of the water level.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1559-1562
• /
• 2009

The influence of hot pressing on the pore structures of Nafion membranes was investigated by observing the Nafion before and after hot pressing with $^1H$ nuclear magnetic resonance (NMR) spectroscopy. The freezing point depression and chemical shift data of water in the Nafion indicated the presence of two different pore size ranges in Nafion. Hot pressing mainly reduced the sizes and number of the big pores. The reduction of water uptake and proton conductivity after hot pressing was explained by this variation of pore size and number. We demonstrated the potential application of chemical shift data and NMR cryoporometry experiments to measure the relative pore sizes, on a nano scale, and numbers.

• 펄프종이기술
• /
• 제30권3호
• /
• pp.46-56
• /
• 1998

The objective of this study was to investigate the relationship between water vapor diffusion properties and the pore structure of paper. Gas-phase molecular diffusivity of water vapor through pores was determined based on the kinetic theory of gas. A mathematical model was derived to characterize the dimensional changes of the pore caused by the fiber-swelling mechanism. A modified-Fickean diffusion model was designed to simulate the water-vapor diffusion phenomena in porous paper web. Structural characterisocs of paper pores including the tortuosity and the shape factor was studied on a theoretical basis of Knudsen flow diffusion. Results are summarized as follows: 1. The theoretical water vapor diffusivity in gas-phase was 0.092$cm^2$ /min, 2. Porosity was inversely proportional to the degree of wet-swelling of paper, 3. Solid-phase water-diffusivity of fiber was 1.2 $ \times 10^{-5}cm^2/min$, 4. Modified diffusion model was fairly consistent to the experimental data (from part I), and 5. The Fickean pore tortuosity, ranging from 1,000 to 2,500, was in inverse proportion to the porosity of paper, and the Knudsen shape factor and length-angle factor for micro-pores in paper were 0.5~3.5 and about 340, respectively.

• 한국지반환경공학회 논문집
• /
• 제9권1호
• /
• pp.33-40
• /
• 2008

본 연구는 강우시 토사사면의 침투거동 특성을 규명하기 위한 기초연구로서 강우재현장치를 활용하여 실내모형실험을 실시하여 유한사면내의 간극수압의 변화를 측정하였으며, 이를 바탕으로 강우지속시간에 따른 강우시 유한사면내의 침투거동 특성을 분석하였다. 분석결과 강우가 지속적으로 발생됨에 따라 사면내의 간극수압은 점차 증가하는 것을 알 수 있으며, 강우초기에는 사면 중앙부 표면에서 간극수압이 크고 강우가 점차 지속됨에 따라 사면내로 강우가 침투하여 사면붕괴 직전에는 사면내부의 간극수압이 크게 증가되는 것을 알 수 있었다. 본 연구에서 실시한 실내실험은 계측기의 민감도가 높고 조작이 용이하지 못하여 많은 실험결과를 얻지 못하였으며, 향후 다양한 사면경사에서의 유한사면에 대한 강우시 침투거동 특성에 대해 실험적 연구가 필요하다고 생각된다.

• 한국농공학회논문집
• /
• 제56권6호
• /
• pp.63-73
• /
• 2014

In this study, the large scale test was performed to investigate the behavior of failure on the embankment and spillway transitional zone by overtopping. The pore water pressure, earth pressure, settlement and failure behaviors according to several reinforcing method were compared and analyzed. The pore water pressure showed a small change in the spillway transition zone and core, indicating that the riprap and geotextile efficiently reinforced the embankment, but non-reinforcement showed a largely change in pore water pressure. The earth pressure by riprap and geotextile at upstream slope and bottom core increased rapidly with the infiltration of the pore water by overtopping. And the earth pressure at crest showed a smally change due to effect of the inclined core. A settlement by riprap showed a small change and the geotextile decreased a rapidly due to failure of crest. The width of failure by riprap at intermediate stage (50 min) showed a largely due to sliding of crest. But, the width and depth of the seepage erosion after the intermediate overtopping period (100 min) were very small due to the effect of riprap than geotextile and non-reinforcement which delayed failure. It has the effect that protect reservoir embankment from erosion in the central part. The pore water pressure at the spillway transition zone due to overtopping increased a rapidly in the case of non-reinforcement, but the reinforced methods by geotextile and riprap showed a smally change. Therefore, the reinforced method by riprap and geotextile was a very effective method to protect permanently and the emergency an embankment due to overtopping, respectively.

• 한국항해항만학회지
• /
• 제37권2호
• /
• pp.173-179
• /
• 2013

파랑과 해저지반 그리고 해안 해양 구조물과의 상호작용은 지반공학뿐만 아니라 해안공학 분야에서도 중요한 이슈중의 하나이며, 파랑에 의해 해저지반 내부에 발생하는 응력 및 간극수압 거동의 파악은 다양한 해안 해양 구조물의 기초 설계 및 해저 연안 지반의 불안정성 검토에 있어서 중요한 과제이다. 해저지반의 불안정에 대한 문제 중, 파랑에 의한 해저지반의 액상화는 기존의 연구를 통하여, 두개의 메커니즘이 존재한다는 것이 밝혀졌으며, 이는 각각 파랑에 의해 해저지반 내부에 발생하는 과잉간극수압의 변동 특성 및 잔류 특성에 따른 것이다. 본 연구에서는 일본 시코쿠 코치(高知)현에 위치하고 있는 코치항에서 채취한 토사에 대한 동적 특성을 고려하여, 파랑에 의해 해저지반 내부에 발생하는 침투류에 의한 잔류과잉간극수압에 대하여 해석을 하였으며, 더 나아가, 코치항에서 계측된 값과 비교 분석을 하였다.

• 한국세라믹학회지
• /
• 제50권1호
• /
• pp.25-30
• /
• 2013

The pore volume of hardened cement with waterproofing materials is lower compared to that of hardened cement without waterproofing materials. Thus, fewer gaps will appear by means of chemical reactions between $Ca^{2+}$ ions in hardened cement and water, solutes, and other ions. Due to the selective permeability, the osmotic pressure of hardened cement can change due to physical effects such as the reduction of the pore volume and the reduction in the number of pores, as well as by the electrochemical reaction between water, solutes, other ions and $Ca^{2+}$ ions in hardened cement. Of course, these factors do not have independent effects but instead a combined complex effect. Accordingly, we studied changes in the osmotic pressure due to the difference in the pore structure of hardened cement. A pore size smaller than 1 nm in hardened cement had only a slight effect on the osmotic pressure, whereas a pore size larger than 1 nm had a direct effect on the osmotic pressure.

• Advances in concrete construction
• /
• 제12권6호
• /
• pp.507-515
• /
• 2021

To evaluate the influence of slag on the alkalinity of pore solution and microstructure of concrete, this paper performs a leaching experiment on hardened cement-slag pastes (HCSP) slice specimens with different slag content in purified water. The pH value of pore solution, average porosity, morphology, phase composition and Ca/Si of HCSP specimens in the leaching process are measured by solid-liquid extraction, saturated-dried weighing, scanning electron microscopy-energy dispersive spectrometry (SEM-EDS) and X-ray diffraction (XRD). Results shows that the addition of slag can mitigate an increase in porosity and a decrease in Ca/Si of HCSP in the leaching process. Besides, an appropriate slag content can improve the microstructure so as to obtain the optimum leaching resistance of HCSP, which can guarantee the suitable alkalinity of pore solution to prevent a premature corrosion of reinforced bar. The optimum slag content is 40% in HCSP with a water-binder ratio of 0.45, and an excessive slag causes a significant decrease in the alkalinity of pore solution, resulting in a loss of protection on reinforced bar in HCSP.

• 한국안전학회지
• /
• 제21권2호
• /
• pp.107-113
• /
• 2006

Earthquake motion is one of the most significant influence factors on the slope stability. In this paper, an effective stress analysis with the elasto-plastic model was carried out to investigate the behavior of the slope stability subjected to the successive two strong earthquake motions, fore and main shock. The major influence of fore shock to the slope stability was considered as the existence of the residual excess pore water pressure. The paper presents the influence of the existence of the fore shock to slope stability using the numerical analyses. In conclusion, the excess pore pressure by the fore shock was not dissipated during the 7hrs of consolidation. By this residual excess pore water pressure, the factor of safety at the sliding face showed the minimum values, and the deformations of slope was large when compared with the case that considered the main shock only. Furthermore, the minimum of the factor of safety came out after the end of the earthquake motion.

• 마이크로전자및패키징학회지
• /
• 제24권3호
• /
• pp.13-18
• /
• 2017

물유리는 기존의 silicon alkoxide보다 훨씬 단가가 저렴하여 상업화에 유리하다는 장점을 나타낸다. 물유리 기반 실리카 에어로겔의 제조에서 산 촉매에 의한 중합 과정이 최종 미세 기공구조 특성에 상당한 영향을 끼치는데, 본 연구에서는 이러한 산 촉매의 종류와 양에 대한 물유리 기반 실리카 에어로겔의 비표면적, 기공 크기 분포 등 각 경우에 해당하는 물성 및 그에 따른 차이를 연구하였다. 최종 생성물의 물성을 통해 물유리 기반 실리카 에어로겔은 중합 반응에 관여하는 산 촉매의 종류와 농도, 몰수에 의해 영향을 받고, 특히 산 촉매의 몰수에 의한 영향이 몰 농도에 의한 영향보다 크게 작용함을 확인하였다. 기존 방식으로 4M 염산 촉매를 첨가할 경우 비표면적이 $394m^2/g$, 기공의 부피가 2.20 cc/g, 평균 기공 지름이 22.3 nm이며 기공률이 92.53%인 실리카 에어로겔을 합성할 수 있었다. 반면 4M의 황산 촉매를 적정량의 몰수인 73 mmol로 투입하여 최종 물유리 기반 실리카 에어로겔을 제조할 경우 비표면적은 $516m^2/g$, 기공의 부피는 3.10 cc/g, 평균 기공 지름은 24.1 nm, 기공률은 96.1%로, 기존의 산 촉매를 투입하여 만든 물유리 기반 실리카 에어로겔보다 전반적으로 기공구조의 특성이 향상됨을 확인하였다.