• 한국주조공학회지
• /
• 제13권1호
• /
• pp.71-80
• /
• 1993

Squeeze casting has advantages to improve mechanical properties of nonferrous castings without losing high productivity. Sound pore free structure makes it possible to be subjected to heat treatment and welding. This process became popular to produce lighter automobile parts alternating cast iron parts. It has, however, two disadvantages of segregation and scattered structure due to the solidified layers in sleeve. In this study segregation behavior of squeeze cast Al-7%Si-0.3%Mg alloy bars was investigated using HVSC machine under various injection conditions. Degree of segregation decreased with injection pressure and effect of injection velocity on it was small. Segregation mode of solute was strongly governed by solidification mode and flow pattern.

• 한국전기전자재료학회논문지
• /
• 제17권4호
• /
• pp.415-421
• /
• 2004

The voltage profile of Zinc/Air battery during discharge has very flat pattern in a given voltage range, But, if not enough the porosity in cathode, as a result of that capacity, energy and discharge voltage of batteries become low. Therefore, we focused the pore effects in activated carbon for cathode. We examined discharge voltage, specific capacity, specific energy, resistance and characteristics during the GSM pulse discharge upon different kinds of activated carbon in Zinc/Air battery, Also we measured porosity of the air cathode according to the ASTM. So we achieved improvement of specific capacity, specific energy and discharge voltage according to increase meso pores of activated carbon. We found the optimized activated carbon material for Zinc/Air battery.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2390-2395
• /
• 2008

The water droplet motion in an air flow microchannel with pores through which water emerges is studied numerically by solving the equations governing the conservation of mass and momentum. The gas-liquid interface is tracked by a level set method which is based on a sharp-interface representation for accurately imposing the matching conditions at the interface and is modified to implement the contact angle conditions on the wall and pores. The numerical results show that the droplet growth and detachment pattern depend significantly on the contact angle and inlet air velocity. Also, the dynamic interaction between the droplets growing on multiple pores is investigated. The pore arrangement subject to droplet merging is found to be not effective for water removal.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.405-406
• /
• 2006

Raw materials from different sources, produced by a given process and having equal chemical composition, are supposed to be equivalent. The differences in sintering behavior have been investigated on P/M steels obtained from four diffusion-bonded powders (Fe + Ni + Cu + Mo) on atomized iron base, at the same alloy contents. Two levels of carbon and two sintering conditions have been investigated. Dimensional changes, C content, hardness, microhardness pattern, universal hardness, fractal analysis, pore features, microstructure features, and rupture strength have been compared to characterize different raw materials. The results show that the claimed equivalence is not confirmed by experimental data.

• Journal of Pharmaceutical Investigation
• /
• 제23권4호
• /
• pp.207-211
• /
• 1993

Reservoir type devices were designed for long-term implantable drug delivery system. The reservoir type device was prepared with the polymethacrylic acid gel coated with polyurethane membrane. Release controlling agent (RCA) were employed to control drug release from devices via generation of micropores in the membranes. The polyurethane membrane functioned as a rate controlling barrier. The drug release pattern of hydrogel demonstrated zero order kinetics. The release rate of drugs could be regulated by varying hydrophobicity/hydrophilicity and content of the RCA, as well as the thickness of the polyurethane membrane. The release of drugs from this system was governed by pore mechanism via simple diffusion and osmotic pressure.

• 한국표면공학회지
• /
• 제26권5호
• /
• pp.255-262
• /
• 1993

Major parameters determining the extent of Ca utilization were investigated for their calcination/sulfation behavior of limestone in the AFBC(Atmospheric Fluidized Bed Combustion) environments. Three different particle sizes of Fredonia limestone were investigated in the lab-scale tubular reactor. The results of the calcination codnversion of limestone imply that thesd decomposition rate of CaCO3 into CaO is dependent on the amount of heat which limestone absorbed. Hg porosimeter measurement of calcined limestone illustrated that surface area and pore volume are increased with decreasing particle size. Raw Fredonia limestone and sequentially as well as simultaneously calcined/sulfated limestones were also examined using SEM. The SEM Studied showed that the surface of the calcined limestone particles is more diffusive nature than that of the parent calcite. However, the sulfur distribution pattern of simultaneously-treated particles and that of the se-quentially-treated one shows no difference.

• 대한치과기공학회지
• /
• 제2권1호
• /
• pp.21-24
• /
• 1980

This experiment was intended to obtain a prefect casting body the same as the original wax patterns by melting metal into the opening of the ring. The investment ring was dried to the temperature between 600 and 700, when the wax pattern would be completely melted to leave an empty mould made in the ring. The main point to studied was the investing process for perfect casting body. This process was experimented on several important factors: the size and spatulation of investment particles, purity of wax patterns, investing time after the completion of model, and investing temperature. The results obtained from the above experiment were as follows: A desirable cast body with no fissure or pore would be mode by investing with smaller particles in the first time and with larger onces in the second, both at the temperature between 180.

• Bulletin of the Korean Chemical Society
• /
• 제22권9호
• /
• pp.948-952
• /
• 2001

Periodic mesoporous organosilicas with rope-based morphology from a reaction gel composition of 1 BTME : 0.57 ODTMABr : 2.36 NaOH : 353 H2O were synthesized. While long rope-shaped product dominated in case of static synthesis condition , gyroid type products instead of rope shaped product appeared and rope shaped product disappeared with agitation. PMO with such a long rope shaped morphology is firstly reported. Additionally, various rope-based morphologies depending on the degree of bending, twisting, folding and winding of rope such as spirals, discoids, toroids, and worm-like aggregates were observed. White powdered products were characterized by X-ray diffraction, N2 sorption measurement, SEM and TEM. From XRD pattern and TEM image, ODTMA-PMO with hexagonal symmetry was identified. The pore diameter and BET surface area of ODTMA-PMO are $32.9{\AA}$ and 799 m2g-1 , respectively. Hexagonally arrayed channels run with long axis of rope and rope-based shapes with various degree of curvature, which was elucidated by using TEM images.

• 약학회지
• /
• 제29권2호
• /
• pp.70-75
• /
• 1985

The influence of polyethylene glycol derivatives on heparin release from cylindrical monolithic type silicone segment devices was examined in physical saline solution. This water-soluble carrier caused the devices to absorb the water in aqueous media. The release rate of heparin from the devices was increased as molecular weight of polyethylene glycol was increased. Water soluble carrier incorporated into silitone segment devices permits controlled release of heparin that otherwise would be released extremly slowly from the polymer. Heparin released from the silicone segment containing polyethylene glycol showed the first-order kinetics. Without changing the release-pattern, the release rate of heparin could be controlled by varing molecular weight of polyethylene glycol, the water-soluble carrier and depleting polyethylene glycol on the outlayer of devices. The mechanism of release probably showed the creation of pore or microdomine through the devices secondary to the swelling.

• Geomechanics and Engineering
• /
• 제18권1호
• /
• pp.1-9
• /
• 2019

In this study, both 2D and 3D failure shapes of rock mass above the water-filled cavity are put forward when the surrounding rock mass cannot bear the pressure caused by the water-filled cavity. Based on the analytical expressions derived by kinematic approach, the profiles of active and passive failure patterns are plotted. The sensitivity analysis is conducted to explore the influences of different rock parameters on the failure profiles. During the excavation of the deep tunnels above the karst cavity, the water table always changes because of progressive failure of cavity roof. Therefore, it is meaningful to discuss the effects of varying water level on the failure patterns of horizontal rock layers. The changing laws of the scope of the failure pattern obtained in this work show good consistency with the fact, which could be used to provide a guide in engineering.