• Analytical Science and Technology
• /
• v.34 no.3
• /
• pp.122-127
• /
• 2021

A mixture of polyvinylpyrrolidone and 1,2-indanedione (PVP-IND) is known to be the best reagent for developing latent fingerprints deposited on the surface of a thermal paper. However, no study has evaluated whether PVP-IND could enhance fingerprints in blood deposited on the surface of thermal paper. Therefore, in this study, the ability of PVP-IND to enhance the fingerprints in blood was investigated. Furthermore, aqueous amido black solution, which is known to be the best reagent for enhancing fingerprints in blood deposited on the surface of thermal paper, was used for comparison with PVP-IND. Therefore, while enhancing the fingerprints in diluted blood, PVP-IND enhanced the quality of fingerprints compared to aqueous amido black solution. The ridge diffused when the undiluted fingerprints in blood were enhanced with PVP-IND because PVP reacted with amino acids in blood; however, amido black solution yielded better results. When treated with PVP-IND, it is presumed that the ridge diffused due to the reaction of PVP and amino acids contained in the blood.

• Analytical Science and Technology
• /
• v.30 no.6
• /
• pp.312-318
• /
• 2017

The shelf life of 1,2-indandione/zinc (1,2-IND/Zn) solution and polyvinylpyrrolidone (PVP) solution, which are known as reagents for developing latent fingermarks deposited on the surface of thermal paper, was studied. The standard latent fingermarks used for comparisons were artificial latent fingermarks printed on thermally sensitive and non-sensitive surfaces with the same intensity. Upon treatment of standard latent fingermarks with the pre-mixed 1,2-IND/Zn and PVP solutions, the fingermarks could be successfully developed until 3 days after the preparation of the mixture. However, from the third day after mixing the reagents, blackening was observed on the surface of the thermal paper, indicating deterioration of the reagent performance. The 1,2-IND/Zn and PVP solutions separately stored without mixing in advance were mixed immediately before use, and the development efficiency of the latent fingermarks deposited on the surface of thermal paper was observed. The performance of the PVP solution decreased after 20 days from the preparation of the reagent. It was also found that the shelf life of 1,2-IND/Zn and PVP mixture was determined by the PVP solution. The effect of oxygen and moisture on the degradation of PVP was investigated. It was found that the performance of the PVP solution deteriorated because of the influence of moisture, though it was not affected by oxygen.

• Journal of the Korean Chemical Society
• /
• v.53 no.5
• /
• pp.565-569
• /
• 2009

The interaction between polyvinylpyrrolidone(PVP) and silver cation has been studied in water at room temperature and atmospheric pressure. The PVP and PVP/Ag composite was observed by transmission electron microscopy (TEM), UV-VIS absorption spectroscopy, Raman spectroscopy and oxygen/carbon dioxide analyzer. We identified silver cations interacting with nonbonding electrons of the oxygen atom in the carbonyl group of PVP. It was shown that PVP/Ag formed stable composites.

• Steel and Composite Structures
• /
• v.9 no.1
• /
• pp.77-87
• /
• 2009

This paper reports the results of an experimental investigation of the polyvinylpyrrolidone (PVP) influence on the steel reinforcement corrosion and compressive strength of concretes in sulphate medium. The effect of admixture of PVP in concrete on the corrosion resistance of steel reinforced concrete was assessed by measuring electrochemical test during 60 days immersion in two different external solutions. AC impedance spectrum indicated that the resistance of PVP mixed electrodes were higher than those without PVP. The compressive strength of concrete specimens containing PVP was measured and an increase of 19%~24% was observed.

• Journal of radiological science and technology
• /
• v.1 no.1
• /
• pp.55-59
• /
• 1978

The photographic characteristics have been studied in relation with various molecular weights of Polyvinylpyrrolidone(PVP). The shape of silver halogen crystals by physical ripening of mixture of photographic gelatine and various molecular weights of PVP were observed. Then, the photographic characteristics have been studied by chemical ripening. Results were concluded as follows: 1. All of the crystals have formed in the shape of (100) or (111). 2. Photographic characteristics were inferior by using PVP of higher molecular weight. 3. Photographic characteristics were superior by using PVP of lower molecular weight. 4. Photographic characteristic were compared with various Emulsion thickness and Tested Resolving power.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.38-42
• /
• 2016

Polyvinylpyrrolidone (PVP), which is glassy polymer to have amide functional group, was induced to fabricate the facilitated olefin transport membranes for olefin/paraffin separation. Separation performance for the mixed gas consisting of propylene and propane (50 : 50 vol%) was measured by gas chromatography and bubble flow meter. The properties of membranes were confirmed by scanning electron microscope and FT-IR. The results of long-term separation tests showed the selectivity of 15 and permeance of 1.3 GPU. The membranes was compared with poly(2-ethyl-2-oxazoline) $(POZ)/AgBF_4/Al(NO_3)_3$ membranes and the characteristics were confirmed as polymer matrix for facilitated transport membranes.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.5
• /
• pp.289-295
• /
• 2010

In this study, the enhancement of the thermal conductivity of water in the presence of multi-walled carbon nanotubes, MWCNT, was investigated. Sodium Dodecyl Sulfate, SDS, and Polyvinylpyrrolidone, PVP, were employed as the dispersant. SDS or PVP was added in pure water. And then, MWCNT of 0.0005, 0.001, 0.002, 0.003, 0.004, 0.005, 0.01, and 0.02 vol% was dispersed respectively. The thermal conductivity and the viscosity were measured with a transient hot-wire instrument built for this study and the DV II+ Pro viscometer. The results showed that PVP had good thermal conductivity at 300 wt% and this was better than that of SDS 100 wt%, also, the viscosity of nano fluid added PVP rapidly increased until 0.02 vol%.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.1
• /
• pp.43-49
• /
• 2014

Purpose: The physical and optical characteristics of hydrophilic contact lens polymerized with addition of glycerin and PVP(polyvinylpyrrolidone) in the basic hydrogel contact lens material were evaluated. Methods: This study used glycerin and PVP(polyvinylpyrrolidone) with the cross-linker EGDMA (ethylene glycol dimethacrylate), HEMA (2-hydroxyethyl methacrylate) and the initiator AIBN (azobisisobutyronitrile) for copolymerization. Results: Measurements of the physical characteristics of the copolymerized material including PVP(polyvinylpyrrolidone) showed the refractive index of 1.4382~1.4288, tensile strength of 0.3446~2542 kgf and water content and contact angle of sample showed the increase of 13.49% and decrease of 21.44% independently. And also, the physical characteristics of the copolymerized material including glycerin showed the refractive index of 1.4330~1.4328, tensile strength of 0.2974~0.2854 kgf, water content 35.58~36.53% and contact angle of sample showed the decrease of 37.64%. Conclusions: Based on the results of this study, the produced copolymers is suitable for conventional lens with high wettability. Also, glycerin minimized the changes of water content and refractive index at the same time, increased the wettability of the hydrogel lens materials.

• Korean Journal of Optics and Photonics
• /
• v.24 no.5
• /
• pp.251-255
• /
• 2013

In this paper, the characteristics of a humidity sensor implemented by Mach Zehnder Interferometer (MZI) in a Planar Lightwave Circuit (PLC) have been designed and demonstrated. The humidity outside is detected with polyvinylpyrrolidone (PVP) coated on the etched arm of the MZI. The length of the etched arm is 10 mm and the PVP was coated by dip-coating into the etched region. As the refractive index of the PVP changes with the surrounding humidity, the PVP-coated humidity sensor presented changes in the interferogram depending on RH (Relative Humidity) around the PLC. The measured results show that the proposed humidity sensor works successfully in the range of 30% to 80% of RH.

• Journal of Embryo Transfer
• /
• v.21 no.2
• /
• pp.121-128
• /
• 2006

In this study, we examined the effects of molecular weight, concentrations and treat the duration of polyvinylpyrrolidone (PVP) in vitro maturation (IVM) medium (Experiment 1), and the effect of PVP in IVM, in vitro fertilization (IVF) and in vitro culture (IVC) medium on the development and cell number of porcine embryos (Experiment 2). The base mediums were NCSU 23 solution for IVM, mTBM solution for IVF and PZM3 solution for IVC. In experiment 1, the development rates to 2 cell and blastocyst stage were not differ from the different molecular weight (MW), concentration and duration of PVP in IVM medium. However, the hatching rate of blastocyst was significantly higher in the group of MW 40,000, 0.5% and $0{\sim}44hr$ than in the other groups (p<0.05). In experiment 2, the results of IVM, IVF and IVC medium with (W) or without (W/O) 0.5% MW 40,000 PVP are follows. The development rate to 2 cell stage was highest in the group of W-W/O-W (p<0.05). The development rate to blastocyst and hatching rate was higher in the group of W-W/O-W and W-W/O-W/O than that of other treatments (p<0.05).