• Food Science of Animal Resources
• /
• v.39 no.3
• /
• pp.355-370
• /
• 2019

The present study aimed at evaluating effects of traditional sauce type and storage time on shelf-life and flavor compounds of marinated pork cooked by Sous-Vide method. Five different traditional sauces (Meju soy sauce, Brewed soy sauce, Fish-soy sauce, Ishiru fish sauce and Anchovy fish sauce) purchased from Asian countries were used. After marination with the sauces, polyvinylchloride film bags containing the marinated pork samples were cooked using Sous-Vide method for $55^{\circ}C$ for 5 h and $60^{\circ}C$ for 30 min, and were then stored for 8 wk at $10^{\circ}C$. Results showed that the pork samples marinated with the sauces retarded the growth of total plate counts (TPC) during storage. At $8^{th}$ wk storage, TPC counts were significantly lower in all samples marinated with the sauces compared to control (p<0.05). Lipid oxidation level was significantly lower in the T2 (Meju soy sauce) and T6 (Anchovy fish sauce) compared to those of T3 (Brewed soy sauce) and T5 (Ishiru fish sauce) or control after 8 wk storage (p>0.05). Forty volatile flavor compounds were detected from the control and marinated samples at $4^{th}$ wk of storage. The pork marinated with Anchovy fish sauce presented significantly higher amounts of importantly pleasant flavor compounds such as; pyrazines and sulfurcontaining compounds than those marinated with other remaining sauces and control. It is concluded that the marination with Anchovy fish sauce partly improved the shelf-life and increased amounts of pleasant flavor compounds of Sous-Vide cooked pork products during storage in comparison to the other remaining sauces.

• Journal of Korean Society on Water Environment
• /
• v.38 no.2
• /
• pp.72-81
• /
• 2022

Numerous studies have investigated the occurrence and fate of microplastics in the environment; however, only limited effort has been devoted to exploring the characteristics of dissolved organic matter (DOM) leached from microplastics. In microplastic (MP)-contaminated environment, MPs are typically mixed with naturally-occurring particles, which interferes with their detection in the environment. Thus, it is necessary to distinguish between the DOM leached from MPs and those leached from natural particles and also to characterize their properties. This study investigated DOM leaching behavior from MPs (polystyrene: PS, polyvinylchloride: PVC) and natural particulates (forest soil: FS, litter leaves: LL) under light, which is considered one of the main weathering processes that affect MPs in the environment. The leached DOM concentrations and fluorescence characteristics were compared under dark versus light conditions. Regardless of the origins, UV light promoted DOM release from all the particulates. More DOM was released from natural particles than from MPs under both conditions. However, the effect of promoting DOM release by UV was more pronounced for MPs than for natural particles. It was observed from fluorescence spectra that the intensity of the humic-like region was substantially reduced when MP-derived DOM was exposed to UV light, whereas the change of intensity was very little for natural particles. Under light conditions, the ratio of protein-like to humic-like fluorescence of MP-derived DOM was higher than that of DOM from natural particles. This study implies that a substantial amount of DOM could be leached from MPs even in MP-polluted environment under UV irradiation. Protein/humic fluorescence ratio could be utilized as a fast probing indicator to separate the two sources of particles under light.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.6
• /
• pp.944-950
• /
• 1996

The purpose of our study is to investigate the changes of physico-chemical properties according to packaging methods(vacuum packaged with polyamide/polyethylene, air packaged with polyvynyl-chloride) and illumination on the properties of Hanwoo beef. pH value in vacuum packaged beef tended to be decreased, but pH value in air packaged beef tended to be increased during storage for 21 days, irrespective of illumination. Contents of volatile basic nitrogen(VBN) and thiobarbituric acid(TBA) values were increased, regardless of packaging methods. However, vacuum packaged beef showed lower VBN, TBA values than those of air packaged beef. Red color(CIE a value) was also decreased. Regardless of packaging method, saturated fatty acids(SFAs) were increased, but unsaturated fatty acids(UFAs) were relatively decreased. And in the ratio of the UFA/SFA, vacuum packaged beef had lower UFA/SFA ratio than that of air packaged beef. In this study, the effect of illumination did not change on physico-chemical properties in Hanwoo beef. In conclusion, the results indicate that the vacuum packaging treatment was more important to prolong the shelf-life of Hanwoo beef than air packaging method.

• Journal of the Korean Chemical Society
• /
• v.41 no.7
• /
• pp.337-342
• /
• 1997

Acryloylmethylbenzo-15-crown-5 was prepared from the reaction of 4'-hydroxymethylbenzo-15-crown-5 with acryloyl chloride. And, poly(acryloylmethylbenzo-15-crown-5) [poly(AMB15C5)] was synthesized by radical polymerization using AIBN as initiator in benzene. Coated wire lead(II) ion-selective electrodes ($Pb^{2+}$-CWISEs) using either poly(AMB15C5) or B15C5 as neutral carrier were prepared, respectively. $Pb^{2+}$-CWISEs gave linear responses with slopes of 28$\pm$ 1mV per decade within the concentration range of $10^{-5} M{\sim}10^{-1}$ M, respectively. Also, the detection limits were $10^{-6}$ M and response times were either 3 or 5 min. for B15C5 and poly(AMB15C5), respectively. $Pb^{2+}$-CWISE base on B15C5 was rather unstable than poly(AMB15C5)'s due to solubility of the B15C5 in water. The selectivity coefficients of a variety of interfering ions such as $Mg^{2+},\; Ca^{2+},\; Co^{2+},\; Ni^{2+},\; Cu^{2+},\; Zn^{2+}$ and $Cd^{2+}$ were small ($10^{-4}{\sim}10^{-5}$), while those of $Na^+$ and $K^+$ were large (0.1∼0.01). In addition, the electrode responses depended upon the pH of test solution and the composition of the membrane. In the range pH 3∼6 of test solution, potentials of Pb2+-CWISEs were hardly changed. The optimal contents of B15C5 and poly(AMB15C5) were 7.7 wt% and 13.1 wt%, respectively.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.8 no.1
• /
• pp.50-66
• /
• 1998

This study was conducted to estimate crystalline silica contents in airborne respirable dust from various manufacturing industries and to compare analytical performance of two methods of quantifying crystalline silica, X-ray diffraction(XRD) and Fourie transform infrared spectroscopy (FTIR). For this study, various manufacturing industries with a history of having pneumoconiosis cases and also known to generate dusts containing crystalline silica were investigated. These industries include: foundry, brick, potteries, concrete, and abrasive material, etc. Both personal and area respirable dust samples were collected using 10 mm, Dorr-Oliver nylon cyclone equipped with 37mm, $5{\mu}m$ pore size, polyvinylchloride (PVC) filters as collection media. In addition, total dust samples were collected side-by-side to the respirable samples. All samples were weighed before and after sampling and were pretreated according to the NIOSH sampling and analytical methods 0500, 7500, and 7602 for dust collection and quartz analysis. In addition, bulk samples were collected and analyzed by X-ray fluorescence (XRF) for minerals. In this article, only the results obtained from foundry are reported. The results from various other industries will be published in future articles. The respirable dust concentrations from personal samples by cyclone were $0.46-1.06mg/m^3$ and those from area samples were $0.34-0.73mg/m^3$. Dust concentrations of personal samples were significantly higher than those of area samples. The highest dust concentration was obtained from the personal samples of the finishing operation. Total dust concentration ranged $1.24-3.40mg/m^3$. The mean quartz contents estimated by FTIR and XRD in the personal respirable dust samples were 5.12% and 4.41%, respectively, without significant difference between them. For quartz analyses, the two techniques were highly correlated with $r^2$ ranged 0.803-0.920. But the results by FTIR were mostly higher than those by XRD. In addition, cristobalite was not detected by FTIR. Significant correlations between contents of crystalline silica and such minerals as $Al_2O_3$, CaO, $TiO_2$, and $K_2O$ suggest possible interferences from these minerals.

• Composites Research
• /
• v.31 no.4
• /
• pp.122-127
• /
• 2018

Sandwich composites of carbon fiber reinforced plastic(CFRP) and polymer foam will be used to automobile and aerospace industry according to increasing importance of light weight. In this study, mechanical and heat resistance properties of sandwich composites were compared with type of polymer foam (polyethylene terephthalate(PET), polyvinylchloride(PVC), epoxy and polyurethane). All types of polymer foams were degraded to 30, 60, 120, 180 minutes in $180^{\circ}C$. After heat degradation, the polymer foams were observed using optical microscope and compressive test was performed using universal testing machine(UTM). Epoxy foam had the highest compressive property to 2.6 MPa and after thermal degradation, the mechanical property and structure of foam were less changed than others. Epoxy foam had better mechanical properties than other polymer foams under high temperature. Because the epoxy foam was post cured under high temperature. As the results, Epoxy foam was optimal materials to apply to structures that thermal energy was loaded constantly.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.99-111
• /
• 1999

The purpose of this study was to evaluate crystalline silica contents in airborne respirable dusts from various manufacturing industries and to compare analytical ability of two different methods of quantifying crystalline silica, X-ray diffraction(XRD) and Fourie transform infrared spectroscopy(FTIR). Various manufacturing industries with a history of having pneumoconiosis cases and also known to generate dusts containing crystalline silica were investigated. These industries include: ceramics, brick, concrete, and abrasive material etc. The personal respirable dust samples were collected using l0mm, Dorr-Oliver nylon cyclone equipped with 37mm, $5{\mu}m$ pore size. polyvinylchloride (PVC) filters as collection media. All samples were weighed before and after sampling and were pretreated according to the NIOSH sampling and analytical methods 7500, and 7602 for dust collection and quartz analysis. A total of 48 samples were collected from these industries. Initial analyses of these samples showed log-normal distributions for dust and quartz concentrations. Some results from ceramics and stone exceeded current Korean Occupational Exposure Limits. The average concentrations of personal respirable dust by cyclone were 0.43, 0.24, 0.26, 0.42, 0.53 and $0.29mg/m^3$ in ceramics, stone, concrete, glass, briquets, and others, respectively. A comparison of performance of two analytical methods for quantifying crystalline silica was performed using data from ceramics. The results showed that no significant difference was found between two methods for ceramics. The mean crystalline silica contents determined by XRD were 3.41 % of samples from briquets and 7.18 % from ceramics and were 2.58 % from concrete and 10.33 % from ceramics by FTIR. For crystalline silica analysis, two analytical techniques were highly correlated with $r^2=0.81$ from ceramics. Both cristobalite and tridymite were not detected by XRD and FTIR.

• Proceedings of the Korea Society of Environmental Biology Conference
• /
• 2002.11a
• /
• pp.141-144
• /
• 2002

Environmental estrogens are natural or synthetic substances present in the aquatic environment, especially in effluent from sewage treatment. However, the adverse effects of these estrogenic substances on fish reproduction are unknown. Di-2-ethylhexyl phthalate (DEHP) is the most common phthalate, which Ps used as a plasticizer in polyvinylchloride (PVC), and it is widespread in the environment and has been found in aquatic organisms and sediments. Therefore, juvenile common carps (Cyprinus carpio) were exposed to nominal concentrations of 17$\beta$-estradiol (E2) (0.5, 5, 50 $\mu\textrm{g}$/L) and DEHP (10, 100, 500 $\mu\textrm{g}$/L) for 21 days, to determine the adverse reproductive effects of these compounds on plasma vitellogenin (VTG) induction, sex steroid level, and gonad weight. Electrophoresis (SDS-PAGE) revealed that much of VTG was induced in fish exposed to 5 and 50 E$_2$ $\mu\textrm{g}$/L, but none of DEHP exposure showed induction. Enzyme-linked immunosorbent assay (ELISA) revealed that VTG was significantly induced in fish exposed to 5 and 50 E$_2$ $\mu\textrm{g}$/L, and combination of 50 E$_2$ $\mu\textrm{g}$/L with 10 and 500 DEHP $\mu\textrm{g}$/L, but none of DEHP exposure showed induction. Analysis of sex steroid levels in some fish revealed that testosterone (T) was detected in both male and female fish of the control and DEHP exposures, but none of fish exposed to 22 concentrations had detectable testosterone level. On the other hand, E$_2$ exposure induced 17$\beta$-estradiol in plasma of male fish, but there was no induction of 17$\beta$-estradiol in plasma of male fish exposed to DEHP. Comparison of gonadosomatic index (GSI) revealed that maximal E$_2$ exposure inhibited ovarian growth, but maximal DEHP exposure stimulated testicular growth. The results indicated that those comparisons can be a useful bio-indicator for determining adverse reproductive effect of endocrine disrupting chemicals (EDCs).

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.42-49
• /
• 2017

To replace phthalate plasticizer for PVC, acetylated monoglyceride (AMG) plasticizers were prepared from plant oil and their plasticization effects were also investigated. Transesterification of coconut oil by glycerol followed by acetylation with acetic anhydride gave AMG-CoCo (Coco : Coconut Oil). In addition, AMG-GMO (GMO : Glycerol monooleate) and AMG-GMO-Epoxy were synthesized by acetylation and epoxidation with glycerol monooleate. It was found that the thermal stability of AMG plasticizers increased in the following order: AMG-GMO-Epoxy > AMG-GMO > AMG-CoCo and all three plasticizers were thermally more stable than those of common petroleum-based plasticizer DOP (Dioctyl phthalate). The tensile strain values of the PVC containing AMG compounds were ca. 770~810%, while tensile strength values were ca. 19~22 MPa, which were higher than those of PVC containing DOP. DMA (Dynamic Mechanical Analysis) results showed that the miscibility of AMG-GMO-Epoxy in PVC was excellent and the $T_g$ of PVC containing AMG-GMO-Epoxy at 50 phr decreased down to $24^{\circ}C$. Finally, the leaching experiment result showed that the weight loss values of PVC containing AMG-GMO and AMG-GMO-Epoxy at 50 phr were as low as 2 and 1%, respectively, indicating that they have high water migration resistance. The above findings suggested that AMG-GMO-Epoxy could be one of plant oil-based PVC plasticizers to replace DOP.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.296-303
• /
• 2005

The co-pyrolysis characteristics of polyvinylchloride (PVC) and acrylonitrile butadiene styrene (ABS) mixtures with various mixing ratios and effect of addition of CaO and $Cu_2O$ have been studied using thermogravimetry (TG) and gas chromatograph-mass spectrometry (GC-MS). In an isothermal decomposition conducted at $500^{\circ}C$, the yields of styrene monomers and aromatic compounds increased as the mixing ratio of ABS increased, and the yield of BTX compounds reached its maximum (16.14%) when the mixing ratios of PVC and ABS was 4:1. In an isothermal decomposition added with metal oxides, the maximum yield of liquid product was 73% when CaO [CaO/(PVC+ABS)=0.4] was added and it was 70% when $Cu_2O$ [$Cu_2O$/(PVC+ABS)=0.4] was added, respectively, where HCl contained in the gaseous product was completely removed when added with CaO [CaO/(PVC+ABS)=0.5] and $Cu_2O$ [$Cu_2O$/(PVC+ABS)=1.0]. Therefore, to obtain the highest yield of liquid product it appears to be the reaction condition: the reaction temperature of $500^{\circ}C$ and mixing ratios of CaO and $Cu_2O$ are 0.5 and 1.0, respectively.