• Archives of Reconstructive Microsurgery
• /
• v.18 no.1
• /
• pp.35-39
• /
• 2009

Purpose: Various techniques have been attempted for design of the flaps. However, there are some disadvantages. They have thin, pliable, and two dimensional methods. The aim of this study is to report usefulness of polyurethane foam dressing materials for three dimensional design of the digital island flap. Methods: From June of 2007 to september of 2008, 10 patients received digital island flap surgery for soft tissue defect of the finger. After minimal debridement of the wound, size and shape of the defect were measured using polyurethane foam. We used Medifoam-$5^{(R)}$ And then, designed this inset the wound. The flap was designed on the donor site with a arterial pedicle as the central axis according to size and shape. A full thickness skin graft from the groin is applied on the flap donor defect and secured with a tieover bolster dressing. Results: Reviewing sizes of the flaps, the length and width of flaps ranged from 1.5 to 3.3 cm and 1.0 to 2.5 cm. The PACS(Picture Archiving Communication System) program allows identification of the donor depth of finger. The distance for the soft tissue ranged from 4.3 mm to 6.7 mm. Mean depth of donor site was 5.3${\pm}$0.6 mm. Also, the thickness of Medifoam-$5^{(R)}$ ranged nearly 5 mm. On flap insetting, full-thickness skin graft was necessary. We did not experience any problems in the recipient site size either, regardless of the extended flaps. Conclusion: Polyurethane foam has many advantages over the more conventional templates. Refinements in flap design and surgical technique resulted in favorable functional and cosmetic results. Especially, for beginner, Polyurethane foam dressing material is a simple and safe tool and therefore is an excellent choice for design of the island flap.

• Archives of Plastic Surgery
• /
• v.32 no.5
• /
• pp.607-612
• /
• 2005

A traditional tie-over dressing may be applied to support the take of a skin graft. Although there are many advantage of this method, it has significant disadvantages, including time-consuming application. Furthermore, when the dressing is changed, the gauze becomes hard and can be stuck to the graft, causing damage and pain upon removal. The purpose of our study is to evaluate the effect of semi-occlusive dressing using polyurethane foam and film dressing($Allevyn^{(R)}$, $Opsite^{(R)}$) after full thickness skin graft. The authors treated 45 cases including burn scar contracture(n=38), syndactyly (n=1), absence of nipple-areolar complex(n=4), traumatic skin defect(n=1) and contact burn(n=1) with authors' method and 39 patients including burn scar contracture (n=39) with the tie-over dressing between 2000 and 2004. The patients in polyurethane foam and film dressing group ranged from 1 to 62 years of age (mean age, 15.1 years) and the patients in tie-over dressing group ranged from 2 to 60 years of age(mean age, 21.3 years). The postoperative results were analyzed according to the following measures: (1) the duration of graft-taking, (2) the admission period, (3) complications. Compared with the traditional tie-over dressing, polyurethane foam and film dressing was shown to be more successful in a reduced duration of graft-taking, in which was similar to the former in the rate of graft-taking, a reduced admission period and patient's discomfort. We concluded that semi-occlusive dressing using $Allevyn^{(R)}$ and $Opsite^{(R)}$ was an effective method after full thickness skin graft, which was easy to shape to difficult body locations, such as web spaces, fingers and maintains a moist environment for wound healing and does not stick to the wound.

• Journal of Veterinary Clinics
• /
• v.27 no.1
• /
• pp.121-124
• /
• 2010

Thermal burn occurred in the anesthetized dog as a result of using hot pack to treat hypothermia. After hospital discharge, thermal burn leaded to secondary infection due to dog bites of the other dog in the house. After secondary infection, the treatment was performed with medication and bandaging. Because of the pain and infection from the wound, carprofen (2 mg/kg bid) and amoxicillin (20 mg/kg bid) were administrated orally for 40 days. And for 35 days, wet-to-dry gauze dressing was used to absorb purulent exudate. During this period, the burn eschar was removed completely from the burn site. After 35 days, the hydrophilic polyurethane foam ($Medifoam^{(R)}$, Ildong Pharm, Co., Korea) was admitted to the burn site for 30 days. $Medifoam^{(R)}$ made healing rate of the wound faster because the inner layer did not adhered to the wound, and newly formed tissue was protected. The second layer, hydrophilic absorptive layer absorbed excessive fluid and kept the wound surface moist. After 65 days after thermal burn, the wound was healed completely.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.442-449
• /
• 2010

Polyurethane(PU) prepolymer was synthesized from ethylene oxide/propylene oxide(EO/PO) random polyether polyol, toluene diisocyanate and chain extender such as ethylene glycol and 1,4-butanediol. PU foams having various compositions were fabricated from PU prepolymers with different hard segment contents(%) and mixed foaming solution of different compositions. PU foam from chain extender-introduced PU prepolymer and mixed foaming solution containing glycerin showed better mechanical property than other groups. Various PU foams were tested on their mechanical property, moisture vapor transmission rate, absorption speed, absorptivity, morphology and cell culture test. According to the test, the PU foam fabricated from chain extender-introduced PU prepolymer and mixed foaming solution containing optimum composition of F-68, glycerin and CMC was found to have the best property for wound dressing materials. From in vivo animal study, it was confirmed that above PU foam showed rapid wound recovery.

• Archives of Plastic Surgery
• /
• v.34 no.2
• /
• pp.169-175
• /
• 2007

Purpose: $Allevyn^{(R)}$(Smith & Nephew, England) is a type of polyurethane foam material with good wound discharge absorption. $Acticoat^{(R)}$(Smith & Nephew, England) is a silver coated dressing material which is effective in infected wound. The purpose of this study is to compare the effects of dry gauze, $Acticoat^{(R)}$ and $Allevyn^{(R)}$ on infected full-thickness wound healing in rat. Methods: One hundred and twenty rats were divided into 3 groups: group I(dressing with dry gauze, n=40), group II(dressing with $Allevyn^{(R)}$, n=40), group III(dressing with $Acticoat^{(R)}$, n=40). A $15{\times}15mm$ square full-thickness wound was made on the dorsum and left open for 24 hours. The size of wound defects were measured each dressing changes. The histological evaluation was performed on the 3rd day, 7th day, 14th day, 21th day. Results: After the wound was left open for 24 hours, typical findings of bacterial infection was observed. After the 7th day, group III showed larger area of epithelialization, smaller defect size compared to those of two other groups. Complete replacement by fibrotic scar tissue was observed in group III with no signs of inflammation on the 14th day. By day 21, the average defect size in group III was decreased from initial 100% to 3.63%. while in group I and II, it was decreased to 62.66% and 53.62%, respectively. Conclusion: $Acticoat^{(R)}$ is an effective tool in the treatment of infected wound.

• Archives of Plastic Surgery
• /
• v.36 no.4
• /
• pp.432-436
• /
• 2009

Purpose: Negative pressure therapy has been used in various conditions to promote wound healing. It has also been used to secure a skin graft by improving microcirculation and improving tight adhesion between the graft and the recipient bed. To reduce post burn scar contracture and improve aesthetical result, many types of dermal substitutes have been invented and used widely. The goal of this study was evaluate usefulness of the VAC (Kinetic concepts Inc., San Antonio, TX) in improving the take rate and time to incorporation of Integra$^{(R)}$ in reconstruction of burn scar contracture. Methods: A retrospective study was performed from October, 2006 to December, 2008. The VAC was utilized for 11 patients. The average patient's age was 19.7 years (range 5 - 27) and average surface area was $785cm^2$ (range 24 - 1600). The burn scars were excised deep into normal subcutaneous tissue to achieve complete release of the scar, Integra$^{(R)}$ was sutured in place with skin staple와 Steri - strip$^{(R)}$. Then slit incisions were made on silicone sheet only with No.11 blade for effective drainage. The VAC was used as a bolster dressing over Integra$^{(R)}$. Negative - Pressure ranging from 100 to 125 mm Hg was applied to black polyurethane foam sponge trimmed to the appropriate wound size. An occlusive seal over the black polyurethane foam sponge was maintained by a combination of the occlusive dressing, OP - site$^{(R)}$. The VAC dressing changes were performed every 3 or 4 days until adequate incorporation was obtained. The neodermis appeared slightly yellow to orange color. When the Integra$^{(R)}$ deemed clinically incorporated, The VAC was removed and take was estimated with visual inspection. Very thin STSG(0.006 ~ 0.008 inches) was performed after silicone sheet removal. Result: The mean time for clinically assessed incorporation of Integra$^{(R)}$ was 10.00 days (range 9 - 12). The mean dressing change was 3.5 times until take was obtained. In All patients, Integra$^{(R)}$ had successful incorporation in tissue without serious complications. Conclusion: Integra$^{(R)}$ in combination with Vacuum - Assisted Closure(VAC) may be incorporated earlier than conventional dressing method.

• Journal of the Korean Burn Society
• /
• v.22 no.1
• /
• pp.15-19
• /
• 2019

Purpose: Pain management in burn treatment is important in improving wound healing and quality of life. Ibuprofen is a proven pain relieving agent in patients with partial thickness burn by intraveous injection. The purpose of this study is to evaluate the efficacy of Biatain Ibu^® (polyurethane foam containing ibuprofen) in pain control for outpatients with partial thickness burns. Methods: A prospective randomized clinical trial was performed in outpatients with partial thickness burn from August 1, 2017 to July 31, 2018. Acute pain, chronic pain, complications, days for re-epithelialization and patient's satisfaction were compared between Biatain Ibu^® and Biatain^® groups. Results: A total of 20 patients (Biatain Ibu^®, n=10; Biatain^®, n=10) were assessed in the trial. On Burn days 3, 5, 7, 11, 13, and 15, the acute pain levels were significantly lower in the Biatain Ibu^® group than in the Biatain^® group. Complications, chronic pain levels and days for re-epithelialization were not significantly different between the two groups. Patient's satisfaction was not statistically significant but was higher in the Biatain Ibu^® group. Conclusion: Biatain Ibu^® is effective in relieving pain in outpatients with partial thickness burn without decreasing patient satisfaction, wound healing ability or developing any complications.

• Archives of Plastic Surgery
• /
• v.35 no.3
• /
• pp.243-247
• /
• 2008

Purpose: For a proper wound care, the correct evaluation of wound is very important. Usually the evaluation of wound was subjective, and as a result, wound care was empirical. There were many attempts to objectify the wound evaluation, and one of them was measurement of the wound pH. The purpose of this study is to observe the wound pH changes during wound healing phase. Methods: From 2005 to 2007, we measured the pH values of 6 acute wounds, which were split thickness skin graft donor sites. In addition, we measured the pH values of 18 chronic wounds, which were 17 pressure sores and 1 tuberculosis ulcer. After pH meter ($SkinCheck1^{(R)}$, Hanna Instruments, Italy) was calibrated, wound pH was checked. Wound was cleansed with saline gauze and dressed with polyurethane foam dressing($Medifoam^{(R)}$, Biopol, Korea). Results: In split thickness skin graft donor sites, the pH raised(mean pH value: $7.45{\rightarrow}7.62$) when the wound was on the process of healing(*p=0.027, analysis of Wilcoxon signed-rank test). If wound became re-epithelialised, the pH value dropped to that of normal skin. However, we could not find a relation between time and the pH values in chronic wound. Conclusion: We could observe the consistent wound pH changes during wound healing phase in acute wound.

• Archives of Plastic Surgery
• /
• v.35 no.6
• /
• pp.716-722
• /
• 2008

Purpose: Split or full thickness skin graft is generally used to reconstruct the palmar skin and soft tissue defect after release of burn scar flexion contracture of hand. As a way to overcome and improve aesthetic and functional problems, the authors used the preserved superficial fat skin(PSFS) composite graft for correction of burn scar contracture of hand. Methods: From December of 2001 to July of 2007, thirty patients with burn scar contracture of hand were corrected. The palmar skin and soft tissue defect after release of burn scar contracture was reconstructed with the PSFS composite graft harvested from medial foot or below lateral and medial malleolus, with a preserved superficial fat layer. To promote take of the PSFS composite graft, a foam and polyurethane film dressing was used to maintain the moisture environment and Kirschner wire was inserted for immobilization. Before and after the surgery, a range of motion was measured by graduator. Using a chromameter, skin color difference between the PSFS composite graft and surrounding normal skin was measured and compared with full thickness skin graft from groin. Results: In all cases, the PSFS composite graft was well taken without necrosis, although the graft was as big as $330mm^2$(mean $150mm^2$). Contracture of hand was completely corrected without recurrence. The PSFS composite graft showed more correlations and harmonies with surrounding normal skin and less pigmentation than full thickness skin graft. Donor site scar was also obscure. Conclusion: The PSFS composite graft should be considered as a useful option for correction of burn scar flexion contracture of hand.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.576-584
• /
• 2011

Purpose: The shape and location, the amount of the wound and the characteristics of the remaining tissues are known to influence wound contraction. The previous studies using small animals have not been an appropriate model because the wound healing mechanisms and skin structures are different from those of the human. The purpose of this study is to evaluate wound contraction according to the shape and location of the wound using a $Micropig^{(R)}$. Methods: Four $Micropigs^{(R)}$ (Medikinetics, Pyeongtaek, Korea) that were 10 months of age weighed 25 kg were used. Full thickness skin defects were made by clearing all the tissues above the fascial layer in the shape of square, a regular triangle and a circle of 9 $cm^2$ each on the back around the spine. Eight wounds were created on the back of each pig, 50 mm apart from each other. The randomly chosen wound shapes included 11 squares, 11 regular triangles, and 10 circles. Wound dressing was done every other day with polyurethane foam. The wound size was measured using a Visitrak $Digital^{(R)}$ (Smith & Nephew, Hull, UK) on every other day after surgery from day 2 to day 28. A biopsy was performed on day 3, and 1, 2, 3 and 4 weeks to investigate the degree of acute and chronic inflammation, the number of microvesssel and myofibroblast density using H & E stain and immunohistochemistry. The wound contraction rate was calculated to figure out the differences among each of the shapes and the locations. Results: The ultimate shape of the circle wound was oval, and that of the regular triangle and square were stellate. The maximum contraction rate was obtained on 8 to 10 days for all the shapes, which corresponds with the immunohistochemical finding that myofibroblast increases in the earlier 2 weeks whereas it decreases in the later 2 weeks. Epithelialization was seen in the wound margin on day 7 and afterwards. The final wound contraction rates were highest for the regular triangle shapes; however, there were no statistically significant differences. The wound contraction rates by locations showed statistically significant differences. The wound in the cephalic area presented more contractions than that of the wounds in the caudal area. Conclusion: The location of a wound is more important factor than the wound shape in wound contraction.