• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.410-417
• /
• 2000

The strength properties of Light-Weighted Soils(LWS) mixed with Expanded Polystrene(E.P.S.) using uniaxial and triaxial tests are studied. Test results show that when the initial water contents of dredged soils are under 135% and the cement contents are above 1%, Light-Weight Soils are in the appropriate strength range of 2.0 lo 4.0kg/$\textrm{cm}^2$. However. E.P.S. contents had a little effects on the strength properties of LWS.

• Transactions on Electrical and Electronic Materials
• /
• 제18권2호
• /
• pp.66-69
• /
• 2017

The internal temperature of human-tissue transfers must be steadily maintained regardless of the external environmental changes. An ice pack and dry ice are the coolants for the transfer containers for which heat-insulating materials such as EPP (expended polypeopylene and EPS (expended polystrene) are used; however, changes of the external temperature/pressure and the melting of the coolants that is due to a long carriage result in changes of the internal temperature, and this makes it difficult to maintain the temperature. Accordingly, the thermoelectric element was used to design/manufacture a transfer container to maintain the internal temperature regardless of the external environmental changes. As a result of the measurement of the changes of the internal temperatures of the manufactured thermoelectric-element container and the EPS container over time, the internal temperature of the EPS container was increased, whereas the internal temperature of the thermoelectric-element container was maintained. The temperature of the distilled water that was poured into the containers indicated a pattern identical to that of the internal temperature.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.615-620
• /
• 2000

The strength properties of Light-Weighted Soils(LWS) mixed with Expanded Polystrene(E.P.S) are studied. Test results show that when the initial water contents of dredged soils are under 135% and the cement contents are above 1%, Light-Weight Soils are in the appropriate strength range of 2.0 to 4.0kg/㎠. However, E.P.S contents had a little affects on the strength properties of LWS. In the view of E.P.S diagram's effects on LWS, which have expand ratio of 25, 35, 45 and 60, further studies considering of physical properties of original E.P.S beads are needed.

• 한국CDE학회논문집
• /
• 제8권4호
• /
• pp.212-221
• /
• 2003

In order to reduce the lead-time and cost, the technology of rapid prototyping (RP) has been widely used. A new rapid prototyping process, transfer-type variable lamination manufacturing process by using expandable polystyrene foam (VLM-ST), has been developed to reduce building time, apparatus cost and additional post-processing. At the same time, VLM Slicer, the CAD/CAM software for VLM-ST has been developed. In this study, algorithms for accuracy improvement of VLM-ST, which include offset and overrun of a cutting path and generation of a reference shape are developed. Offset algorithm improves cutting accuracy, overrun algorithm enables the VLM-ST process to make a shape of sharp edge and reference shape generation algorithm adds additional shape which makes off-line lamination easier. In addition, proposed algorithms are applied to practical CAD models for verification.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1139-1146
• /
• 2008

Due to the construction technique (or the construction culture) growth in and out of Korea, newly-developed insulation have been continuously released. Furthermore, all legislation and regulation that World follows are gradually becoming unified. (e.g. FTA(Free Trade Agreement) with the United States was contracted, and inevitable FTA contraction with EU and China). In addition, insulation type, with the purpose are becoming unified. Accordingly, KS F 2803 legislated in 1966 about the Domestic Insulation Standard including traditionally used insulation(Rockwool, Fiberglass, Polystrene, Polyurethan, Perlite) has to be amended by considering International Standard and the alternatives. This reference is going to make description for solution of contradiction.

• Preventive Nutrition and Food Science
• /
• 제4권2호
• /
• pp.152-158
• /
• 1999

Polystyrene is frequently used for food packaging because of its eaxy processing rigidity , and low cost. Styrene, which is present in detectable amouts in the polymer, is usually considered to be the substance responsible for the possible tainting of a polystyrene-packed food by migration. The contamination of foods and beverages by trace amounts of materials which have migrated from plastics use din packaging is a concern both on the grounds of adversely affecting product quality and of food safety. These lead to increasing attention to the potentional hazards of a large variety of plastic materials and foods. In this paper we reviewed the history of Styrene and various analytical methods of sample preparation and detection to assess the extent to which styrene is present in food-grade polystrene materials and to what extent it leaked into foods and food stimulants.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.45-46
• /
• 2023

CLC is used as a filling material for many buildings, and according to energy saving design standards, CLC also requires insulation performance. However, it shows lower insulation performance compared to organic insulation, so additional research is needed. Therefore, in this study, the insulation properties of CLC were analyzed by incorporating EPS beads with high insulation performance into CLC. In this experiment, EPS beads and blast furnace slag were replaced, and W/B was fixed at 33%. The EPS Bead mixing ratio was divided into 5 levels: 0, 0.5, 1.0, 1.5, 2.0 (%), and the experimental items were measured for apparent density and thermal conductivity. As a result of the experiment, the apparent density and thermal conductivity tended to decrease as the mixing ratio of EPS beads increased. It is judged that the density decreased due to the low density and the micropores inside, and the thermal conductivity also decreased.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권4호
• /
• pp.19-26
• /
• 2016

최근 층간소음을 저감시키기 위하여 밀도와 동탄성계수가 낮은 바닥완충재를 뜬바닥구조에 사용하며, 이로 인하여 바닥완충재의 처짐 및 상부 마감몰탈의 균열이 발생할 가능성이 높아지고 있다. 이 연구에서는 층간소음 저감을 위하여 사용되는 바닥완충재의 장기처짐을 실험을 통하여 평가하였다. 완충재의 재질, 하부형상, 밀도, 가력하중을 변수로 하는 16개의 바닥완충재에 대하여 490일간의 장기처짐 실험을 하였다. 실험에 의하면 완충재의 장기처짐은 하중가력 200일 시점 이후로 일정한 경향을 보였다. 예외적으로 Polystyrene 재질의 완충재 경우, 250 N 하중재하에서는 160일, 500 N 하중재하에서는 100일 이후로 일정한 경향을 보였다. 이 연구에서는 처짐이 일정해지는 구간을 제외한 증가 구간에 대해 두 가지의 장기처짐 평가식을 작성하였으며, 각각 ISO 20392와 실험값의 추세를 이용한 선형회귀 분석을 이용하였다. 두 평가식과 실험값과의 비교분석에서 처짐량이 10 mm 이하의 경우, ISO 20392와 실험값의 추세를 이용한 선형회귀 분석 방법 모두 오차 0.4 mm 이하로 실제 처짐과 유사하게 나타났다. 단, Polystyrene 재질의 완충재 경우, ISO 20392에 의한 처짐 분석 방법이 더 적절한 것으로 판단되었다.

• 산업기술연구
• /
• 제7권
• /
• pp.27-47
• /
• 1987

Fine anthracite is very difficult to upgrade by conventional processes such as gravity concentration or froth flotation, because large quantities of fine coals are generated at the mining and preparation stages and a significant portion of these fine coals are mixed with gangue minerals. This study, therefore, was carried out for the purpose of improving recovery of low ash clean coal, effective beneficiation of low-grade coking coal and removal of sulphur from high-sulphur coals by employing the method of selective agglomeration using oil or polystrene flocculants, for coals which are generally hydrophobic in nature will be extracted by using flocculants. Studies were performed by varying solid concentration, concetration of bridging liquid, mixing speed and mixing time, balling speed and balling time, dispersant dosage, flocculant dosage, pulp pH, and particle size. The results were : when the methods of the oil agglomeration and selective flocculation were employ(in the two process the sample was ground to the size of -74 micron), 1) ash content of the agglomerated coal was 9.85, 7.83%, 2) combustibel recovery of it was 98.5%, 93.5%, respectively. It was observed in selective flocculation that polystyrene is an effective flocculant for coal, De-entrapment of shale from the concentrate flocculated by mechanical agitation was necessary for substantional reductions in final ash content.

• 폴리머
• /
• 제27권1호
• /
• pp.17-25
• /
• 2003

원자 이동 라디칼 중합 (ATRP)을 이용하여 CuBr/N,N,N',N",N"-pentamethyldiethylene triamine 촉매 시스템하에서 용액중합으로 polystyrene 거대 개시제와 polystyrene-b-t-poly(butyl acrylate) (PS-b-P(tBA)) 블록 공중합체를 합성한 후, 가수분해를 통해 polystrene-b-poly(acrylic acid) 양친매성 블록 공중합체를 얻었다. 또한, 이를 중화하여 블록 이오노머를 제조하였다. 합청된 PS-b-P(tBA) 블록 공중합체는 분자량이 5000-10000 정도로 조절되었고, 분자량 분포도 1.2 이하로 비교적 좁게 나타났다. 공중합체는 $^1$H-NMR, FT-IR로 분석하였으며, DSC로 열적 성질을 측정한 결과, styrene의 비율이 더 많기 때문에 100 $^{\circ}C$ 근처에서 T$_{g}$가 나타났으며, TEM을 통해 이온 그룹의 상분리를 확인하였다.분리를 확인하였다.