• 한국응용과학기술학회지
• /
• 제28권2호
• /
• pp.146-151
• /
• 2011

In this study, by using oleic acid and polypropylene glycol, good natured antifoaming agent for suitable electronics process under the alkaline conditions were synthesized. For the synthesized mono and diesters, acid value, hydroxyl value was measured, and identified by FT-IR and $^1H-NMR$ spectroscopy. Surface properties such as surface tension, critical micelle concentration(cmc) for diluted aqueous solution was measured, and tested the antifoaming properties according to the difference of alkyl chain length, various concentration, temperature and pH. The surface tension of synthesized antifoaming agent, PPMO(Polypropylene glycol monooleate) was 24.3 dyne/cm, PPDO(Polypropylene glycol dioleate) was 23.7 dyne/cm. By increasing of the alkyl chain length, surface tension was decreased slightly, and showed good antifoaming properties at 0.06 wt% concentration and $50^{\circ}C$, pH 11. These synthesized compounds are expected to apply as a suitable antifoaming agents in the semiconductor and the PCB(Printed Circuit Board) manufacturing process.

• Journal of Pharmaceutical Investigation
• /
• 제21권4호
• /
• pp.237-245
• /
• 1991

Matrix type silicone rubber devices were designed for long-term implantable drug delivery system. Release controlling agents (RCA), i.e., polypropylene glycol, polyethylene glycol, were employed to control drug release from the devices. The release rate of drug from RCA dispersed silicone matrices was mainly dependent on hydrophilicity-hydrophobicity of drug and RCA. In the case of hydrophilic drug, the release from the RCA dispersed matrix was regulated by swelling kinetics. Especially when the relatively hydrophobic polypropylene glycol was used, swelling control mechanism induced zero-order release kinetics. Whereas, the release of hydrophobic drug was resulted from partition mechanism. The effect of RCA was to increase drug diffusivity.

• Journal of Pharmaceutical Investigation
• /
• 제24권4호
• /
• pp.251-256
• /
• 1994

Polypropylene glycol (M.W. 4000) was crosslinked and chain-extended by using triisocyanate and diisocyanate to synthesize rubbery and water swellable hydrogels. Model drugs, i.e., sodium salicylate and indomethacin were incorporated in the polymer matrices by swelling loading. The drug release rates of drugs could be regulated by varying the degrees of crosslinking and chain-extension. Whereas, no correlation was observed between the drug release profiles and the swelling behaviours of the matrices. The release of drugs from the matrices was considered to be governed by the mobility and mesh size of the polymer chains in the matrices.

• 한국응용과학기술학회지
• /
• 제34권4호
• /
• pp.778-786
• /
• 2017

In this study, analyzed the changes occurred after adding casein emulsions to water - dispersed polyurethane using polypropylene glycol (PPG). For this purpose, anionic water - dispersed polyurethane containing PPG, IPDI and DMPA and casein emulsion prepared by dissolving casein in distilled water using ammonia water were prepared. As a result of measuring the alkali resistance by using the prepared resin, there was no change in the physical properties. The tensile strength of the sample having a high casein content was measured to be $2.227kgf/mm^2$. Elongation was measured at 474% for samples containing less casein and The abrasion resistance was measured as 46.090 mg.loss of sample containing much casein as a result of the surface roughness measurement.

• Journal of Pharmaceutical Investigation
• /
• 제21권2호
• /
• pp.91-95
• /
• 1991

Polyethylene glycol, polypropylene glycol and block copolymer of ethylene glycol and propylene glycol were crosslinked by triisocyanate to form water swellable, rubbery polymer. The equilibrium swelling of the hydrogels ranged from 3% to 60% according to the hydrophobic-hydrophilic properties of the prepolymers. Model drugs, sodium salicylate and prednisolone were incorporated in the polymer matrices by swelling loading. Physical properties of the drugs affected the drug release mechanisms due to the change in the swelling behaviors of the polymeric devices. Zero order release was observed in the case of relatively hydrophobic polymer matrices.

• 폴리머
• /
• 제25권1호
• /
• pp.33-40
• /
• 2001

불소화된 폴리우레탄 탄성체를 4,4'-diphenyl methane diisocyanate(MDI) 혹은 toluene 2,4-diisocyanate(TDI) 같은 diisocyanate와 perfluorinated polyether(Fomblin $ZDOL^{\circledR}$)로부터 2단계 용액 중합법에 의해 합성하였다. 합성된 폴리우레탄의 soft segment 부분 중 10~50%를 Fomblin ZDOL 성분이 되도록 polypropylene glycol(PPG) 혹은 polytetramethylene glycol(PTMG)과 같은 polyether polyol을 반응도중에 혼합하여 반응을 완성하였다. 사슬연장제로는 ethylene diamine 혹은 1,4-butanediol을 사용하였다. 합성 중합체의 확인과 평균분자량 등 특성조사에 FT-IR, $1^H$-NMR, 겔투과 크로마토그래피(GPC), 시차주사열량계(DSC)를 이용하였고 표면특성은 X-ray photoelectron spectroscopy(XPS)와 접촉각으로 조사하였다. 표면분석결과 불소기는 합성된 탄성체 필름의 내면보다 표면에 더 많이 분포함을 알 수 있었다

• 멤브레인
• /
• 제8권4호
• /
• pp.228-234
• /
• 1998

다양한 수질 오염원 중 페놀과 같은 유기화합물은 배출조건이 비정상적인 경우 기존의 처리방법으로 제거하거나 파괴하기 어렵다. 수용액으로부터 페놀을 분리하기 위한 최근의 연구들은 활성탄에 의한 흡착, 용매 추출 등에 의해 수행되어져 왔으며, 물-기름 유화에 기초를 둔 액막법이 기존의 기술들을 대체하기 위한 방법으로 시험되어져 왔다. 본 연구에서는 tri-n-butyl phosphate(TBP)와 액상 고분자를 지지액막의 액막용액으로 선정하여 수용액상의 페놀을 분리하였다. 공급측 페놀 농도를 변화시키고 다양한 액막용액을 사용하여 이들이 페놀분리에 미치는 효과를 연구하였다. TBP를 운반체로 사용한 경우의 실험결과들은 용매추출에서 주로 사용되고 있는 methyl isobutyl ketone(MIBK)보다 높은 물질전달속도를 보여주었으며, 선택한 액상고분자 중 polypropylene glycol 4000(PPG-4000), polybutylene glycol 500(PBG 500)의 경우 MIBK와 유사하거나 조금 높은 값을 나타내었다.

• 공업화학
• /
• 제9권3호
• /
• pp.445-450
• /
• 1998

에폭시수지와 caster oil(CO)형 폴리우레탄(PU)은 상호침투고분자(IPNs)를 형성하였다. 사슬연장제인 polypropylene ether glycol(PPG)와 가교제인 CO를 사용하여 두 종류의 폴리우레탄을 제조했다. CO를 이용한 COPU/epoxy의 동시중합 상호침투고분자(SINs)는 PPG를 이용한 PPGPU/epoxy SINs보다 상용성이 좋았다. PPGPU/epoxy SINs의 전조성에서 가교구조의 얽힘정도가 감소함에 따라 굴곡강도가 감소하였다. COPU/epoxy SINs은 PPGPU/epoxy SINs에 비해 기계적 물성과 파괴인성이 우수하였다. 실험 결과, 모든 SINs의 파괴단면에서 폴리우레탄의 공동화에 의한 응력백화 현상보다는 전단변형과 크랙의 편향이 관찰되었다.

• Korean Membrane Journal
• /
• 제1권1호
• /
• pp.81-85
• /
• 1999

Tributyl phyosphate(TBP) polypropylene glycol 4000(PPG-4000) and the mixture of two compounds were examined as a liquid membrane in a supported liquid membrane (SLM) to separate phenol from aqueous solution.The feed concentration of phenol was varied in a broad range from 500 mg/L to 5000 mg/L and different types of liquid membrane were prepared to elucidate their effects on separation of phenol. It was found that the modified PPG 4000 with TBP and toluene diisocyanate(TDI) might be used as a proper liquid membrane because the mass transfer rate examined with this membrane was higher than that through methyl isobutyl ketone (MIBK) which has been used as a conventional solvent in a solvent extraction process. The breakthrough pressure of the SLM is defined to be the pressure difference across the membrane at which the supported liquid membrane is not kept in the pores any more. it indicates how the SLM is stable., It was found that the breakthrough pressure of the modified PPG-4000 was much higher than those of typical organic solvents.

• 한국염색가공학회지
• /
• 제30권2호
• /
• pp.90-97
• /
• 2018

Hydrophilic reactive hot-melt polyurethane adhesive(HRHA) using a hydrophilic polyol having different molecular weight and NCO index was synthesized. This HRHA was synthesized using Polyethylene glycol(PEG) as a hydrophilic polyol, Polypropylene glycol(PPG) and Polycaprolactone diol(PCL) as hydrophobic polyols, and Methylene diphenyl diisocyanate(MDI) as an isocyanate. The changes in IR spectrum, viscosity and thermal properties of HRHA with different PEG molecular weights and NCO index were investigated, and the tensile strength and elongation of the HRHA casting film and the peel strength, moisture permeability and water pressure of the HRHA coated fabric were confirmed. In this experiment, as the molecular weight of PEG and NCO index increased, the adhesive strength, tensile strength, elongation and moisture permeability was increased but viscosity and Tg was decreased.