• Journal of Adhesion and Interface
• /
• v.4 no.4
• /
• pp.1-6
• /
• 2003

After atmospheric pressure plasma treatment of polypropylene(PP) film surface, we measured the contact angle of the surface by using polar solvent (water) and non-polar solvent (diiodomethane). We also calculated the surface free energy of PP film by using the measured values of contact angles. And then we analyzed contact angle and surface free energy with changing the condition of atmospheric pressure plasma treatment. Upon each condition of atmospheric plasma treatment, contact angle and surface free energy showed an optimum value or leveled off.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.3
• /
• pp.104-110
• /
• 2010

Cyclic deformations of polymer foam film are simulated using the finite element method. Material of polymer foam film is polypropylene (PP). The calculated polymer foam film is micro-scale thin film has cellular structure. The polymer foam film is used in ferro-electret applications. The polymer foam film is idealized to one cell structure as lens shaped stretched truncated octahedron model. Cyclic deformation is performed by uniaxial stretching. Stretching direction is perpendicular to plane of cellular film. Various cyclic strain amplitudes, pore wall thicknesses, pore shape are investigated to find deformation tendency of cellular structure. Consequently, cellular structure has various macroscopic stresses on cyclic deformation with various pore thickness and pore shape.

• Composites Research
• /
• v.33 no.3
• /
• pp.161-168
• /
• 2020

In this paper, we have studied the mechanical properties of thermoplastic carbon fiber fabric composites with spread technology and compression molding temperature were investigated. Carbon fiber reinforcement composites were fabricated using commercial carbon fiber fabrics and spread carbon fiber fabrics. Mechanical properties of the commercial carbon fiber composites (CCFC) and spread carbon fiber composites (SCFC) according to compression molding temperatures were investigated. Thermal properties of the polypropylene film were examined by rheometer, differential scanning calorimetry, thermal gravimetric analysis. Tensile, flexural and Inter-laminar shear test. Commercial carbon fiber reinforcement composites and spread carbon fiber composites were fabricated at 200~240℃ above the melting temperature of the polypropylene film. Impregnation properties according to compression molding temperature of the polypropylene film were investigated by scanning electron microscopy. As a result, as the compression molding temperature was increased, the viscosity of the polypropylene film was decreased. The mechanical properties of the compression molding temperature of 230℃ spread carbon fiber composite was superior.

• Textile Coloration and Finishing
• /
• v.21 no.1
• /
• pp.1-9
• /
• 2009

A lot of research has been made over the recent decade to develop testing packages with antimicrobial properties to improve food safety. In this study, a new method, experimental device and technology for environmental corresponding packages of polypropylene (PP) film has been developed to provide effective temperature buffering during the transport/long-term storage of grains or foodstuffs from the supplier to the market. This quantitatively optimized mixing system enabled to produce PP films with the 700$\sim$1,400d (width;1.5$\sim$3mm, thickness;0.01$\sim$0.5mm). In the whole mixing systems, the finely-granulated inorganic illite and PP virgin chip for master batch (M/B) chip was calculated by digital measurement methods, and then the M/B chip for PP film was adapted through a air jet and PP grinding method. The prepared PP film was characterized with tensile strength and elongation, far infrared radiation (FIR) emissivity, antimicrobial activity and deodorization properties. The results revealed that the two differently grain-sized illite could be show homogeneously dispersed on PP chip surface, and as the increasing of illite content, the FIR emissivity and the anion emission rate of film was increasingly improved. In both of 325 and 1,500 mesh-sized illite contained PP chip, of course the antimicrobial activity was good. But the ultimate deodorization rate for ammonia gas of PP film were found to be approximately the same.

• Preventive Nutrition and Food Science
• /
• v.10 no.2
• /
• pp.187-190
• /
• 2005

Silk fibroin (SF) films were prepared using various plasticizers and their physical properties were determined. Polyethylene glycol (PEG)-SF and polypropylene glycol (PPG)-SF films had tensile strengths (TS) of 23.71 MPa and 24.51 MPa, respectively, whereas the glycerol (G)-SF film had the lowest TS of 14.24 MPa. G-SF film had the highest $\%$ elongation, compared to PPG-SF and PEG-SF films. Water vapor permeability (WVP) of SF films varied with addition of plasticizers, and PEG-SF film had the lowest WVP. There was no significant difference in Hunter L value among treatments, but PEG-SF film had higher Hunter a and b values. These results suggest that SF film could be applied to food packaging and that the addition of plasticizers should improve the physical properties of SF film.

• Food Science and Biotechnology
• /
• v.16 no.1
• /
• pp.62-66
• /
• 2007

Four different biopolyester films, two aliphatic polyesters including polylactides (PLA) and poly(3-hydroxy-butyrate-co-3-hydroxyvalerate (PHBV), and two aliphatic-aromatic copolyesters including Ecoplex and Biomax, were prepared using by thermo-compression, and their tensile and water barrier properties were determined. Among the films tested, PLA film was the most transparent (T: 95.8%), strongest, and stiffest (TS, 40.98 MPa; E, 1916 MPa), however it was rather brittle. In contrast, Ecoplex film was translucent while being the most flexible and resilient (EB, 766.8%). Biomax film was semitransparent and was the most brittle film tested (EB, 0.03%). All biopolyester films were water resistant exhibiting very low water solubility (WS) values ranging from 0.0.3 to 0.36%. PHBV film showed the lowest water vapor permeability (WVP) value ($1.26{\times}10^{-11}\;g{\cdot}m/m^2{\cdot}sec{\cdot}Pa$) followed by Biomax, PLA, and Ecoflex films, respectively. The water vapor barrier properties of each film were approximately 100 times higher than those of carbohydrate or protein-based films, but about 100 times lower than those of commodity polyolefin films such as low-density polyethylene (LDPE) or polypropylene (PP).

• Food Science and Preservation
• /
• v.21 no.6
• /
• pp.767-775
• /
• 2014

The shelf-life of fresh mushrooms is notably limited because their browning, texture change, and decay are too fast after immediately harvest. Especially, the best management for extending golden needle mushroom's shelf-life is modified atmosphere packaging under pressure vacuum at cold storage. In this study, three types of films, $20{\mu}m$ polyethylene+polypropylene (PE+PP), oriented polypropylene (OPP), and low density polyethylene (LDPE) were tested to extend the shelf-life of golden needle mushrooms. Mushrooms were packed under pressure vacuum and stored at $10^{\circ}C$ for 2 weeks. The golden mushrooms in LDPE film as a commercial packaging, were highly perishable and immediately proceed deterioration as browning, elongation, fluctuation of respiratory quotient (RQ) and softening within 7 days after packaging. On the other hand, the mushrooms in OPP and PE+PP film shown that shelf-life were extend to 14 days from 7 days, causing delay breakup of vacuum and maintenance of color, length, and RQ during storage. The breakup of vacuum in PE+PP film was faster few days than OPP film packaging. This present study indicated that the golden needle mushrooms by OPP packaging under pressure vacuum treatment might be extended the shelf-life until approximately 14 days during cold storage.

• Proceedings of the Korean Reliability Society Conference
• /
• 2005.06a
• /
• pp.199-208
• /
• 2005

In the calendar and the advertising catalog, the surface Is usually coated by coating polypropylene film. The delamination failure of coating film depends on surface roughness and quality of the substrate paper. In this paper, the mechanisms of delamination failure between the coating film and the paper is investigated by using the root cause analysis as one of techniques of reliability evaluation. The papers used in failure analysis are three kind products made by two domestic and one foreign companies. It found that the main causes of delamination failure between the coating film and the paper were the creation of microvoids caused by shape of filler and their growth caused by contraction of paper.

• Proceedings of the Korean Fiber Society Conference
• /
• 1990.06a
• /
• pp.42-42
• /
• 1990

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1202-1203
• /
• 2015

This paper describes the development of HVDC ${\pm}500kV$ polypropylene laminated paper (PPLP) mass-impregnated (MI) type cable system for HVDC transmission lines. As you know, mass-impregnated type cable generally has only insulating layer with the Kraft paper impregnated with a high-viscosity insulating compound. But polypropylene laminated paper is made of a layer of extruded polypropylene (PP) film sandwiched between two layers of Kraft paper. Thanks to PP film and its combination with Kraft paper, PPLP has higher AC, Impulse (Imp.) and DC breakdown (BD) strengths as well as lower dielectric loss than conventional Kraft paper insulation. In addition, Kraft MI cable has a limitation for the maximum conductor temperature as $55^{\circ}C$ But this PPLP MI cable has higher maximum conductor temperature than that of Kraft MI cable due to advantage of oil drainage characteristics. It is the most economic type of cable for HVDC transmission. Also HVDC ${\pm}500kV$ PPLP MI cable system was developed including land joints and outdoor-terminations. In order to prove the mechanical and electrical performances, the type test was carried out according to CIGRE recommendations. A full scale cable system has been tested successfully. And additional load cycle and polarity reversal tests on the cable system showed a higher performance compared with a similar mass impregnated paper cable.