• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.11 s.158
• /
• pp.1626-1635
• /
• 2006

The purpose of this study was to search for comfortable protective clothing for waste incinerator workers. The experimental protective clothing came in two types: one whose outer side made use of polypropylene film, and the inner side, a non-woven rayon fabric processed with charcoal with a 10% density (CF): and one whose outer side made use of polyolefine and polyamide films, and the inner side, a non-woven polypropylene fabric (NNCF). Experiments were conducted on five healthy adult women whose average age was 21. These experiments were conducted at a climate chamber, in which the temperature and relative humidity were set below $28{\pm}1^{\circ}C\;and\;50{\pm}10%$, respectively. Measured were the rectal temperature, the skin temperature, the sweating rate, the weight loss, the heart rate, the blood pressure, the temperature, and the relative humidity of a microclimate and subjective sensation. These were measured within a period of 60 min, consisting of a 20-min stable period, a 20-min exercise period (walking exercise for 2 miles/hr on a treadmill), and a 20-min recovery period. Through this experiment, the differences between the human body's physiological reactions to CF and NNCF clothing, and the human body's comfort levels when wearing these, were determined.

• Textile Coloration and Finishing
• /
• v.20 no.2
• /
• pp.53-58
• /
• 2008

New dyeable PP fiber and several products from it has been developed through dispersing polyester copolymer into PP resin by a Korean synthetic fiber manufacturer and its colleagues. The dyeing properties of PET/dyeable PP double knit fabric were examined with three different types of disperse dye in this study. It was found that the disperse dye, exhausted on dyeable PP at early stage of dyeing, migrated to PET at elevated dyeing temperature when two fibers were dyed in the same dye bath. The ratios of dye distribution between two substrates dyed at $120^{\circ}C$ and $130^{\circ}C$ showed no difference. S type disperse dyes showed good build-up properties and acceptable color fastness while high light fastness type exhibited the lowest amounts of exhaustion but excellent color fastness. It might be concluded that the most appropriate dye for PET/dyeable PP double knit fabric was S type, and that some color difference between PET side and dyeable PP side was unvoidable.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.287-292
• /
• 2002

Graft copolymerization of styrene and glycidyl methacrylate (GMA) to the peroxidized polypropylene (PP) fabric with E-beam in $O_2$ atmosphere was carried out in vapor phase with benzoyl peroxide (BPO) as an initiator. The degree of grafting of copolymers was increased with the increase of the reaction temperature and the highest degree of grafting was obtained at $70^{\circ}C$ with styrene, and at $80^{\circ}C$ with GMA. The highest degree of grafting of styrene grafted PP according to reaction time was higher than that of GMA grafted PP. In vapor phase graft polymerization, the degree of grafting of copolymers according to water composition in monomer mixture was effected by the boiling temperature of monomers.

• Advances in materials Research
• /
• v.8 no.2
• /
• pp.103-115
• /
• 2019

Polypropylene (PP) fibers for making fabric which is used for packing cement have a high strength and high tear resistance. Due to these excellent properties the present study investigates the effect of PP fibers on the mechanical strength of concrete. Mechanical strength parameters such as compressive strength, splitting tensile strength and flexural strength are evaluated. Structural integrity of concrete using Ultrasonic Pulse Velocity (UPV) was also studied. Concrete containing PP fibers in percentage of 0%, 0.15%, 0.25%, 0.5% and 0.75% was developed with a characteristic compressive strength of 25 MPa. Concrete cubes, cylinder and prismatic specimens were cast and tested. It was found that the UPV values recorded for all specimens were of the similar order. Test results indicated the used of PP fibers can significantly improve the flexural and splitting tensile strengths of concrete materials whereas it resulted a decreased in compressive strength. The relative increase in split tensile and flexural strength was optimum at a fiber dosage of 0.5% and a mild decreased were observed in 28 days compressive strength. The findings in this paper suggested that PP fibers deriving from these waste cement bags are a feasible fiber option for fiber-reinforced concrete productions.

• Current Research on Agriculture and Life Sciences
• /
• v.24
• /
• pp.23-27
• /
• 2006

Seedling characteristics of rice on nursery covered with different weight of polypropylene spunbonded fabric(PSF) were investigated to determine the optimum thickness of PSF for raising of healthy rice seedlings. Four different thickness of PSF 40, 60, 80 and $100g/m^2$ were used in the seedling nursery with a conventional polyethylene(PE) film. PSF and PE were taken off in 20 days after sowing(DAS) on April and in 10 DAS on June. Plant height of 20- and 30- day old seedlings in PSF covering nursery was slightly taller as the increase of PSF thickness from $40g/m^2$ to $100g/m^2$, but number of leaves and shoot dry-weight of the seedlings was reduced. Root solidity of seedlings grown in lighter PSF ($40{\sim}60g/m^2$) covering nursery was more favorable than that in relatively heavier PSF($80{\sim}100g/m^2$). The optimum thickness of PSF for the raising of healthy seedlings was $40{\sim}60g/m^2$ PSF at sowing on April 20 and April 30 for single cropping, and $40g/m^2$ PSF on June for double cropping based on the growth characteristics of seedlings investigated at seedling nursery covered with different thickness of PSF.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.2
• /
• pp.89-95
• /
• 2003

The study of this experiment is focused on labor saving of healthy rice seedling production using PSF (polypropylene spunbonded fabrics) as thermal protection material. Several factors such as different compositions of nursery soil and PSF materials were tested to produce healthy rice seedlings. The inner thermal protection material in PE film (polyethylene film) showed $0.9-1.7^{\circ}C$ higher than that of PSF 40-100 $\textrm{gm}^{-2}$. The light transmittance-ratio also showed similar trends. It is considered that the appropriate PSF material density was 40 gm$\textrm{gm}^{-2}$ in accordance with economic values and healthy rice seedlings. Plant height and dry weight according to various nursery soil showed the rang-es of 8.5-14.2cm and 5.5-10.0mg, respectively. In composition of nursery soil, artificial soil combined with paddy soil was effective in producing healthy seedling for rice seedling production. The total sugar content also showed the difference between PSF 40, 60 $\textrm{gm}^{-2}$ PE film (0.43-0.52mg FW $\textrm{g}^{-1}$) and PSF 80, 100 $\textrm{gm}^{-2}$ (0.28-0.35mg FW $\textrm{g}^{-1}$) and it showed the same tendency among varieties as well as various nursery soil. These results demonstrate that PSF 40 $\textrm{gm}^{-2}$ economically affordable, and can be recommended as thermal protection material for producing good healthy rice seedling.

• Journal of Adhesion and Interface
• /
• v.20 no.2
• /
• pp.66-70
• /
• 2019

The surface of hydrophobic polypropylene (PP) fibers (spun-bonded fabric) was treated by an atmospheric plasma treatment method. These pre-treated hydrophilic PP fabrics were dip-coated in the aqueous poly(N-vinyl pyrrolidone) (PVP) solution. PVP layers on the surface of PP fiber were crosslinked by an irradiation of electron beam. The thickness of PVP hydrogels coated on the surface was easily controlled by changing the concentration of PVP in coating solution. The stepwise surface treatment, PVP coating, and hydrogel formation via electron beam irradiation were analyzed by the measurement of contact angle, scanning electron microscopy, and optical microscopy.

• Analytical Science and Technology
• /
• v.12 no.1
• /
• pp.7-12
• /
• 1999

The cation-exchange adsorbent (CEA) was prepared by radiation-induced grafting of glycidyl methacrylate (GMA) onto polypropylene (PP) fabric and its subsequently phosphonation. The adsorption characteristics of $Pb^{2+}$, $Cu^{2+}$ and $Co^{2+}$ for the CEA were discussed. In the grafting of GMA onto PP fabric, the degree of grafting (%) increased with increasing reaction time, reaction temperature, and pre-irradiation dose. The maximum grafting yield was observed around 60% GMA concentration. The content of phosphoric acid ranges from 2.5 to 3.5 mmol/g with the 85% phosphoric acid. The adsorption of $Pb^{2+}$, $Cu^{2+}$ and $Co^{2+}$ by the CEA was enhanced with increasing phosphoric acid content. The order of adsorption capacity of CEA was $Pb^{2+}$>$Co^{2+}$>$Cu^{2+}$.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.527-534
• /
• 2006

The purpose of this study is the development of more effective filter-type polymer adsorbent for removal of anionic pollutants from wastewater. In order to synthesize the polymer adsorbent that possesses anionic exchangeable function, carboxyl(-COOH) group of PP-g-AA nonwoven fabric was converted into amine($-NH_2$) group by the chemical modification using diethylene triamine(DETA). FT-IR data indicate that amine group was introduced into PP-g-AA through amidation of grafted acrylic acid by reaction with DETA. The degree of amination increased with increase in the reaction time and temperature of the chemical modification process, and was significantly improved by the pre-swelling treatment of PP-g-AA with solvent and addition of metal chlorides as a catalyst in following order as $NH_4OH>MeOH{\geq}HCl{\geq}H_2O\;and\;AlCl_3>FeCl_3{\geq}SnCl_2{\gg}ZnCl_2{\geq}FeCl_2$, respectively. However, the addition of catalyst limited the reusability of DETA, hence was less useful from the viewpoint of cost effectiveness and waste management. The anion exchange capacity of the aminated PP-g-AA(PP-g-AA-Am) increased with increase in the degree of amination, but it reached maximum value at the degree of amination as about $50{\sim}60%$. The anion exchange capacity of PP-g-AA-Am was higher than those of commercial anion resins.

• The Research Journal of the Costume Culture
• /
• v.7 no.5
• /
• pp.165-176
• /
• 1999

The purpose of this study was to evaluate the effect of various knitted fabrics of sports socks on their properties of hygiene and stability. Seventeen men\`s sports socks to represent five groups with different fiber content, knit structure, yarn fineness, and finishing were used. Properties of hygiene and stability of socks were determined. The results were as follows ; 1. Evaluation of Water, vapor and heat transport properties in socks with varing fiber content showed that cotton 100% socks had the highest drop absorbency, wickability, water absorbency and water retention. Polypropylene 100% socks had an excellent wickability and moisture permeability. Acrylic blend socks had the highest thermal resistance. 2. The greatest knit stretch and knit growth of socks having lower power were found to be with cotton 100% socks had the lowest stretch. Acrylic blend socks had a excellent stretch but low fabric growth, which could give a good fir sensation during wear. 3. The commerical antimicrobial finished socks showed excellent durability after repeated cycles of laundering. 4. Length and width shrinkages were found in all laundered samples during initial cycles due to rearrangement by mechanical relaxation. Shrinkages showed no further changes and reached equilibriums after 5 cycles. Cotton 100% or cotton blend socks showed lower dimensional stability than other socks during fabric care.