• Elastomers and Composites
• /
• v.50 no.3
• /
• pp.189-195
• /
• 2015

In this study, we prepared epoxidized poly ethylene-ter-1-decene-ter-divinylbenzene (Epo-PEHV) as a reactive compatibilizer to prevent phase separation phenomenon which occurs upon blending polypropylene (PP) and ethylene-vinyl alcohol copolymer (EVOH). Firstly, PEHV was prepared under high catalyst activity according to content of catalyst and cocatalyst. After then, we modified vinyl group of the terpolymer with epoxy group. We observed that the terpolymer was successfully epoxidized by 1H-NMR and FT-IR analysis. The Epo-PEHV was added by 2, 5, 10% in PP/EVOH blends. The morphologies and mechanical properties of PP/Epo-PEHV/EVOH blends were analyzed by SEM and UTM, respectively. Epo-PEHV enhanced the interfacial adhesion of PP and EVOH blends.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.61-64
• /
• 2009

This study is reviewed fire resistance characteristics of high strength concrete according to changes in PP fiber mixing ratio and type of fine aggregate, and the results can be summarized as follows. As fire resistance characteristics, all plain crushed sands prevented spalling regardless of increase in mixing ratio of PP fiber. Mixtures other than the plain showed satisfactory spalling prevention when 0.05 % or more of PP fiber was mixed. After the fire resistance experiment, the plain showed 5.5 % of mass loss rate when fiber was not mixed and others could not be measured. According to increase in mixing ratio of fiber, river sand with fineness modulus of 2.2 showed most satisfactory result of 34 %${\sim}$42 %. Mass loss rate after fire resistance experiment was most satisfactory at about 10 % in the plain crushed sand without mixing of fiber, and all other mixes with 0.05 % PP fiber or more showed 5${\sim}$10 % loss rate.

• Elastomers and Composites
• /
• v.38 no.1
• /
• pp.27-37
• /
• 2003

This work presents a comparative study of the morphology and structure related properties of thermoplastic elastomer blends based on SEBS/PP/Oil and dynamically vulcanized EPDM/PP/Oil. A combination of ruthenium oxide staining and low voltage scanning electron microscopy (LVSEM) was found to be suitable for the study of morphology of these highly oil extended blends. h close analogy was found in the mechanical, thermal and rheological properties of the two systems made in an internal Brabender mixer and co-rotating turin screw extruder. The morphology of the blends, as made by the two techniques, was found to be significantly different. In the case of TPVs, the blonds made in the extruder had smaller EPDM domains and better tensile properties. In the case of SEBS, the blends made in the Brabender had more co-continuous phases and showed better tensile properties. Crystallization behavior of the isotactic polypropylene in the blends was found to be influenced by the type of rubber. Blends of SEBS/PP crystallized at a lower temperature than the TPVs. These differences were probably caused by differences in the nucleating ability of the two rubbers.

• Journal of the Optical Society of Korea
• /
• v.12 no.1
• /
• pp.38-41
• /
• 2008

Precise micropatterning of polypropylene film, which is highly transparent in the wavelength range over 250 nm has been demonstrated by 355 nm nano/picosecond laser and 785 nm femtosecond laser. Increments of both the pulse energy and the shot number of pulses lead to cooccurrence of photochemical and thermal effects, demonstrated by the spatial expansion of rim on the surface of PP. The shapes of the laser-ablated polypropylene films were imaged by optical microscope and measured by a 3D optical measurement system. And, the ablation depth and width of polypropylene film ablated by femtosecond laser at various pulse energy and pulse number were characterized. Our results demonstrate that a femtosecond pulsed laser is an efficient tool for fabricating micropatterns of polypropylene films, where the micropatterns are specifically tailored in size, location and number easily controlled by laser processing conditions.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.248-252
• /
• 2005

PP/MMT nanocomposites having a various compositions were prepared by melt blending with a twin screw extruder. In this study, maleic anhydride-grafted PP (MAH-g-PP) was used as a compatibilizer in order to assist the exfoliation or hen in the pp matrix. from the results or x-ray diffraction (XRD) and transmission electron microscope (TEM) measurements for the nanocomposites, we confirmed that MMT was exfoliated. PPM nanocomposites have shown good flame retardancy by synergistic effect between MMT and flame retardant. The mechanical and thermal properties of the nanocomposites showed significant enhancement compared with those of neat PP, The excellent flame retardancy of the PP/MMT nanocomposites, UL94 V-0 value, was successfully obtained with reduced amount of the flame retardant.

• Composites Research
• /
• v.33 no.6
• /
• pp.346-352
• /
• 2020

In mobility industries, the use of thermoplastic composites increased dynamically. In this study, the mechanical and impregnation properties of continuous glass fiber (GF)/polypropylene (PP) composite were evaluated with different GF contents. The GF/PP commingled fiber was manufactured with different GF contents and continuous GF/PP composite was manufactured using continuous compression molding process. Tensile, flexural, and impact test of specimens were evaluated with different GF contents. The fracture behavior of specimens was proved using field emission-scanning electron microscope images of fracture area and impregnation property was evaluated using dynamic mechanical analyzer and interlaminar shear strength. Finally, the GF/PP composite was the optimized mechanical and impregnation properties using 50 wt.% GF/PP commingled fiber.

• Korean journal of applied entomology
• /
• v.54 no.4
• /
• pp.369-374
• /
• 2015

Grapholita molesta (GM) has been considered as a major problem to apple and peach orchards. Mating disrupters have been applied to control the pest over the world as an Integrated Pest Management [IPM] tool. Various types of dispensers releasing mating disrupters have been developed with different formulation of wax, polyethylene tube and aerosol. In this study, the dispensers that were composed of ester waxes and polypropylene (PP) film were used as dispenser materials to analyze release pattern of GM pheromone compared with paraffin wax and polyethylene (PE) film. The release pattern in PP film group was consistent with time while PE film group irregular. Based on these results, Japan wax_PP film dispenser (Japan_PP) was manufactured and showed the mating disruption effect of 98% during 5months in peach orchard.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.280-280
• /
• 2006

Na-bentonite (local clay mineral) and Na-montmorillonite were treated with quaternary alkylammonium cations. The effect of the molecular structure and functional groups of the surfactants on the organoclays was investigated by X-ray diffraction (XRD). For the preparation of nanocomposites, organoclays were melt-blended with polypropylene in a twin screw extruder and $Surlyn^{(R)$. ionomer was used as a reactive compatibilizer. The clay dispersions in the composites were investigated by X-ray diffraction (XRD). XRD spectra showed no peak at low angle indicated that the silicate clay layer has a nearly exfoliated dispersion in the polymer matrix. Thermal and mechanical properties of nanocomposites were higher than those of PP.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1428-1431
• /
• 1998

The polypropylene has been known to have higher melting temperature than polyethylene, and good mechanical properties. This paper introduces the experement result of dielectric breakdown properties to a polypropylene with a crystal structure. According to the experement, breakdown voltage is incresed when a thickness of thin film thinned. Spherulites of PP film prepared by annealing is larger than that of PE.

• Fashion & Textile Research Journal
• /
• v.6 no.3
• /
• pp.384-392
• /
• 2004

The purpose of this study is in development of effective filter-type polymer adsorbent for removal of pollutants from wastewater by UV irradiation graft polymerization. Photografting of acrylic acid (AA) on polypropylene (PP) nonwoven fabric using benzophenone (BP) as a photosensitizer was investigated. Inhibition of homopolymerization was achieved by adding various concentrations of $FeSO_4{\cdot}7H_2O$, $CuSO_4{\cdot}5H_2O$ and Mohr's salt. As AA concentration was increased, the degree of grafting was increased as to a specific value and then decreased, and the effect of BP concentration showed the same tendency. It was also found that the degree of grafting increased with reaction time and reaction temperature. Addition of the polyfunctional monomers and $H_2SO_4$ to the grafting system accelerated the photografting. The melting temperature, molecular weight and breaking stress and breaking strain were decreased with the increase in the degree of grafting.