• Carbon letters
• /
• 제25권
• /
• pp.43-49
• /
• 2018

This study suggests the novel thermoplastic toughening agent, which can be applied in the monomer forms without increasing the viscosity of the epoxy resin and polymerized during the resin curing. The diazide (p-BAB) and dialkyne (SPB) compounds are synthesized and mixed with the epoxy resin and the carbon fiber reinforced epoxy composites are prepared using vacuum infusion process (VIP). Then, flexural and drop weight tests are performed to evaluate the improvement in the toughness of the prepared composites to investigate the potential of the novel toughening agent. When 10 phr of p-BAB and SPB is added, the flexural properties are improved, maintaining the modulus as well as the toughness is improved. Even with a small amount of polytriazolesulfone polymerized, due to the filtering effect of the solid SPB by the layered carbon fabrics during the VIP, the toughening and strengthening effect were observed from the novel toughening agent, which could be added in monomer forms, p-BAB and SPB. This suggests that the novel toughening agent has a potential to be used for the composites prepared from viscosity sensitive process, such as resin transfer molding and VIP.

• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2261-2264
• /
• 2010

In this work, mechanical and electrical properties of graphenes (GP)/carbon nanotubes (CNTs) co-reinforced high density polyethylene (HDPE) matrix composites were studied. The microstructure, morphologies, and electric properties of the composites were evaluated by XRD, TEM, and 4-probe methods, respectively. It was found that the electric resistivity of 0.5 wt %-GP/HDPE was immeasurable, and 2.0 wt %-CNTs/HDPE showed high resistivity ($6.02{\times}10^4{\Omega}{\cdot}cm$). Meanwhile, GP (0.5 wt %)/CNTs (2.0 wt %)/HDPE showed excellent low resistivity ($3.1{\times}10^2{\Omega}{\cdot}cm$). This result indicates that the co-reinforcement systems can dramatically decrease electric resistivity of the carbon/polymer nanocomposites.

• Macromolecular Research
• /
• 제12권1호
• /
• pp.119-126
• /
• 2004

In this study, the influence of silane coupling agents, featuring different organo-functional groups on the interlaminar and thermal properties of woven glass fabric-reinforced nylon 6 composites, has been by means of short-beam shear tests, dynamic mechanical analysis, scanning electron microscopy, and thermogravimetric analysis. The results indicate that the fiber-matrix interfacial characteristics obtained using the different analytical methods agree well with each other. The interlaminar shear strengths (ILSS) of glass fabric/nylon 6 composites sized with various silane coupling agents are significantly improved in comparison with that of the composite sized commercially. ILSS of the composites increases in the order: Z-6076 with chloropropyl groups in the silanes > Z-6030 with methacrylate groups> Z-6020 with diamine groups; this trend is similar to that of results found in an earlier study of interfacial shear strength. The dynamic mechanical properties, the fracture surface observations, and the thermal stability also support the interfacial results. The improvement of the interfacial properties may be ascribed to the different chemical reactivities of the reactive amino end groups of nylon 6 and the organo-functional groups located at the ends of the silane chains, which results from the increased chemical reactivity in order chloropropyl > methacrylate > diamine.

• 한국분말재료학회지
• /
• 제6권4호
• /
• pp.320-324
• /
• 1999

The formation, microstructure and properties of novel ceramic composite materials manufactured by active-filler-controlled polymer pyrolysis were investigated. In the presence of active filler particles such as transition metals, bulk components of various geometry could be fabricated from siliconorganic polymer. Molybdenum- and tungsten-filled polymer suspensions were prepared and their conversion to ceramic composites by annealing in $CH_4$ atmosphere were studied. Dimensional change. porosity and phase distribution (filler network) were analyzed and correlated to the resulting hardness values. Molybdenum and tungsten as active filler were carburized completely to $Mo_2C$, $W_2C$ and WC in $CH_4$ atmosphere. Consequently, microcrystalline composites with the filler reaction products embedded in a silicon oxycarbide glass matrix were formed. Hardness was increased with increasing carburization and reached 8.6-9.5 GPa in the specimen pyrolyzed in $CH_4$ atmosphere.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.88-91
• /
• 2004

In this study, a number of natural fiber henequen reinforced polymer matrix composites were successfully fabricated by means of a compression molding technique using chopped henequen fibers surface-treated with different electron beam irradiation (EBI) dosages, thermoplastic poly(butylene succinate), thermosetting unsaturated polyester and phenolic resins. Their interfacial and thermal characteristics were studied in terms of interfacial shear strength, fracture surface, dynamic mechanical properties, dimensional stability, and thermal stability using single fiber microbonding test, SEM, DMA, TMA, and TGA. The results show that their interfacial and thermal properties significantly depend on the intensity of EBl treatment on the natural fiber surface.

• 대한기계학회논문집A
• /
• 제31권2호
• /
• pp.237-244
• /
• 2007

In order to obtain mechanical properties of CNT/Polymer nano-composites, molecular dynamics simulation is performed. Overall system was modeled as a flexible unit cell in which carbon nanotubes are embedded into a polyethylene matrix for N $\sigma$ T ensemble simulation. COMPASS force field was chosen to describe inter and intra molecular potential and bulk effect was achieved via periodic boundary conditions. In CNT-polymer interface, only Lennard-Jones non-bond potential was considered. Using Parrinello-Rahman fluctuation method, mechanical properties of orthotropic nano-composites under various temperatures were successfully obtained. Also, we investigated thermal behavior of the short CNT reinforced nanocomposites system with predicting glass transition temperature.

• Composites Research
• /
• 제22권4호
• /
• pp.41-49
• /
• 2009

천연섬유복합재료는 저비용, 경량, 재생성, 친환경적인 재료로 최근 제조되고 있다. 또한 이들 재료는 생체분해성과 비연마 특성을 갖고 있다. 천연섬유의 친환경적이고 생체분해성으로 인해 천연섬유복합재료는 기존의 섬유를 대체할 잠재적인 대체재로 관심을 받고 있다. 천연섬유의 화학적, 기계적, 물리적 특성은 다양한 섬유의 셀룰로스양에 따라 명확한 특정이 구분되며, 이러한 복합재료의 기계적인 물성치는 기지재와 섬유간의 접착에 의해 주로 영향을 받고 있다. 천연섬유표면의 여러 화학적인 물리적인 개질방법은 섬유와 기지의 접착력 향상에 영향을 주어 결국 복합재료의 기계적인 물성치를 향상시킬 수 있다. 본 논문은 최근 개발되고 있는 천연섬유복합재료의 섬유종류, 고분자기지, 제조기술, 섬유의 처리, 섬유 기지간 계면등에 관한 최근의 연구결과들을 정리하여 소개한 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제32권5호
• /
• pp.29-38
• /
• 2004

본 연구에서는 생분해성 고분자인 polybutylene succinate-adipate (PBS-AD)에 옥수수 전분을 충전제로 첨가한 생분해성 복합재의 열적성질에 대해 고찰하였다. 열분석은 온도에 대한 함수로서 복합재 물질의 화학적 성질과 중량 감소율을 측정할 수 있는 분석적인 방법으로 사용되고 었다. 옥수수 전분의 열안정성은 순수한 생분해성 고분자인 PBS-AD보다 낮았다. 옥수수 전분의 함량이 증가할수록 생분해성 복합재의 열안정성과 열분해 온도는 감소하였고 회분의 함량은 증가하였다. 이것은 생분해성 복합재의 계면에서의 결합려이 옥수수 전분의 혼합비율이 증가할수록 감소하였기 때문이다. 옥수수 전분의 함량이 증가할수록 생분해성 복합재의 유리전이온도(T_g) 와 용융온도(T_m) 에는 큰 변화가 없었다. 옥수수 전분이 혼합된 생분해성 고분자 복합재의 저장 탄성율(E')과 손실 탄성율(E") 값은 PBS-AD보다 높았다. 이 결과는 옥수수 전분의 첨가로 인하여 생분해성 복합재의 강성이 증가하였기 때문이다. 고온에서 생분해성 고분자 복합재의 감소된 저장 탄성율 값은 온도가 증가할수록 고분자 사슬의 운동성이 증가하기 때문이다. 위의 결과들로부터, 옥수수 전분이 생분해성 고분자 복합재를 제조하는데 충전제로서 사용이 가능하다고 예상할 수 있었으며 옥수수 선분과 생분해성 고분자의 계면에서의 결합력을 향상시키기 위하여 결합제의 사용이 요구된다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.280-280
• /
• 2006

Na-bentonite (local clay mineral) and Na-montmorillonite were treated with quaternary alkylammonium cations. The effect of the molecular structure and functional groups of the surfactants on the organoclays was investigated by X-ray diffraction (XRD). For the preparation of nanocomposites, organoclays were melt-blended with polypropylene in a twin screw extruder and $Surlyn^{(R)$. ionomer was used as a reactive compatibilizer. The clay dispersions in the composites were investigated by X-ray diffraction (XRD). XRD spectra showed no peak at low angle indicated that the silicate clay layer has a nearly exfoliated dispersion in the polymer matrix. Thermal and mechanical properties of nanocomposites were higher than those of PP.

• Elastomers and Composites
• /
• 제55권3호
• /
• pp.167-175
• /
• 2020

Various studies have been conducted to improve silica dispersion of silica filled tire tread compounds; among them, silica wet masterbatch (WMB) technology is known to be suitable for manufacturing silica filled compounds that have high silica content and high dispersibility. Till now, the WMB study is focused on the natural rubber (NR) or emulsion styrene-butadiene rubber (ESBR) that does not have a silica-affinity functional group, and a study of NR or ESBR having a silica-affinity functional group is still not well known. Unlike the dry masterbatch technology, the WMB technology can solve the problems associated with the high Mooney viscosity when applied to silica-friendly rubber. However, a coagulant suitable for each functional group has not yet been determined. Therefore, in this study, different coagulant applied silica WMB was prepared by applying calcium chloride, sulfuric acid, acetic acid, and propionic acid by using a carboxyl group functionalized reversible addition fragmentation chain transfer ESBR. The evaluation of the WMB compounds revealed that the calcium chloride added WMB compound showed excellent silica dispersion, abrasion resistance, and rolling resistance.