• 전기학회논문지
• /
• 제61권3호
• /
• pp.433-436
• /
• 2012

We propose a novel micro surface plasmon resonance (SPR) sensor system based on polymer materials. The proposed SPR system consists of the incident medium with polymer waveguide and the gold thin film for sensing area. Using a polymer optical waveguide instead of a prism in SPR sensing system offers miniaturization, low cost, and potable sensing capability. The whole device performance was analyzed using the finite-difference time domain method. The optimum gold thickness in the attenuated total reflection mirror of polymer waveguide is around 50 nm and the resonance angle to generate surface plasmon wave is 68 degrees.

• ETRI Journal
• /
• 제26권6호
• /
• pp.661-664
• /
• 2004

The thermal behavior of an arrayed-waveguide grating made of a silica/polymer hybrid waveguide was examined. We experimentally confirmed that the hybrid waveguide is effective to decrease the temperature and polarization dependence of the center wavelength owing to the negative thermo-optic coefficient of the refractive index and extremely low baking temperature of the polymer cladding. However, the detachment of the polymer cladding from the silica core, which took place either during a repeated heat cycle test or during long-term storage in atmosphere, was a serious problem for practical use.

• Macromolecular Research
• /
• 제15권3호
• /
• pp.211-215
• /
• 2007

Hybrid thin film nanostructures composed of metal nanoparticles (NPs) and self-assembled polymer films with different spatial distributions of NPs were analyzed by optical waveguide spectroscopy (OWS). Specifically, the dielectric constants were calculated using effective medium theory for the incorporation of 1 vol% Au NP into the block copolymer (BCP) films having a cylindrical nanodomain morphology. Three cases were considered: uniform distribution of NPs in the film; selective distribution of NPs only in the cylindrical domains; and segregation of NPs to the center of the cylindrical domains. The optical waveguide spectra derived from the calculated dielectric constants demonstrate the feasibility of experimentally distinguishing the composite nanostructures with different inner morphologies in the hybrid metal NP-BCP nanostructures, by the measurement of the dielectric constants using OWS.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.391-394
• /
• 2003

Laser direct writing process is developed 3rd harmonic Diode Pumped Solid State Laser with the near visible wavelength of 355 m sensitive polymer is irradiated by UV laser and developed using polymer solvent to obtain quasi-3D. It is important to reduce line width for image mode waveguides, so some investigations will be carried out in various conditions of process parameters such as laser power, writing speed, laser focus and optical properties of polymer. This process could be to fabricate a single mode waveguide without expensive mask projection method. Experimentally, the patterns of trapezoidal shape were manufactured into dimension of 8.4 mm width and 7.5 mm height. Propagation loss of straight waveguide measured 3 dB/cm at 1,550 nm.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.13-14
• /
• 2006

The use of soft-lithography instead of standard photolithography and dry etching technologies is attractive because inexpensive optical device can be realized. Polymerization using multi-photon absorption of materials is also a good method for optical waveguide fabrication. Laser induced self-writing technology of optical waveguide is also very simple and attractive. Using these processes, we can fabricate and interconnect optical circuits at once. In this presentation, several simple fabrication methods will be introduced. New optical loss evaluation method for polymer optical waveguides will also be presented

• ETRI Journal
• /
• 제26권3호
• /
• pp.281-284
• /
• 2004

We demonstrate a new fabrication method for adjusting the temperature dependence of a polymeric arrayed-waveguide grating (AWG) on a Si substrate. A temperature-dependent wavelength shift of-0.1nm/$^{\circ}C$ in a polymeric AWG on a Si substrate is reduced of+0.1nm/$^{\circ}C$ by detaching part of the polymer film, including the grating channel region of the AWG, from the Si substrate while the other parts remain fixed on the substrate.

• 대한전자공학회논문지SD
• /
• 제41권2호
• /
• pp.33-38
• /
• 2004

측면 연마된 편광 유지 광섬유와 폴리머 평면도파로가 결합된 비대칭 방향성 결합기를 이용하여 가변 광필터를 구현하였다. 소자의 최상부층 위에 형성된 마이크로 스트립 히터에 의하여 유도된 폴리머 평면도파로의 열광학 효과는 결합기의 공진파장을 이동시킨다. 제작된 소자는 720 ㎽의 인가 전력으로 230 ㎚ 이상의 넓은 가변 범위를 보였다.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.42-47
• /
• 2003

The laser direct writing method has some advantages of being maskless, allowing rapid and inexpensive prototyping in comparison to conventional mask-based photolithography. In general, there are two kinds of laser direct writing methods such as the laser ablation method and the laser polymerization method. The laser polymerization method was studied fur manufacturing waveguide in this paper. It is important to reduce line width for image mode waveguides, so some investigations will be carried out in various conditions of process parameters such as laser power, writing speed, focusing height and optical properties of polymer. Experimentally, the optical waveguide was manufactured trapezoid shape. Through SEM the waveguide was 20 ${\mu}{\textrm}{m}$ width and 7.4 ${\mu}{\textrm}{m}$ height.

• 한국레이저가공학회지
• /
• 제8권1호
• /
• pp.9-18
• /
• 2005

The laser direct writing method using a UV Argon-ion laser is studied for fabrication of waveguide. The laser direct writing system is constructed with a vision camera, a xy-stage, a motion controller and the delivery components of a laser beam. The UV Argon-ion laser has wavelength range of $333.6\~363.8$ nm. A photo-active UV curable polymer for a planar light-wave circuit(PLC) of single mode is used. This polymer is irradiated by Argon-ion laser and developed by a solvent after a post-baking. The optimum laser direct writing condition is obtained experimentally by changing various process parameters such as laser power, writing speed and focal length. The propagation and coupling loss of a optical waveguide was measured as 1dB/cm and 0.6dB/cm, respectively. Also, the minimum width of waveguide of $100{\mu}m$(ZPLW-207) is obtained. Finally, the waveguides of line, bend and branch type are successfully fabricated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.275-277
• /
• 1999

A application possibility of photoresist flexible film for optical waveguide is proposed and described. The optical waveguide dimensions that is consists of Mach-zehnder interferometric and single channel waveguide based on the single-mode conditions in LiNbO$_3$ device was utilized and fabricated by wet etching technique. This Polymer material for core layer is SU-8/5O(Microchem.) and its refractive index from prism couping method was measured about 1.59 thickness about 10${\mu}{\textrm}{m}$ at wavelength 0.6328${\mu}{\textrm}{m}$. From the results, this work can show the possibility of fabricating a flexible optical waveguide in the field of integrated optics.